Connect with us

Bathtub

Do Condoms Go to Landfill

Published

on

Did you know that over 20 billion condoms are used worldwide each year? That’s a staggering amount of waste that often ends up in landfills.

But does it have to be this way? In this article, I will explore the lifespan of a condom, different disposal methods, and the environmental impact of condom waste.

I will also discuss alternatives to landfill disposal and how we can raise awareness and promote sustainable condom use.

Let’s dive in and find solutions to this pressing issue.

toilet tower defense codes ep 58

Key Takeaways

  • Condoms have a lifespan of one to five years and should not be reused due to potential risks.
  • Condoms are predominantly made of latex or polyurethane, which are not easily recyclable.
  • Common disposal methods for used condoms include throwing them in the trash, but flushing them down the toilet is not recommended.
  • Improper disposal of condoms contributes to non-biodegradable waste, harms ecosystems, and causes pollution.

The Lifespan of a Condom

The lifespan of a condom typically ranges from one to five years, depending on the storage conditions and frequency of use.

It’s important to note that reusing condoms isn’t recommended due to the potential risk of breakage and the reduced effectiveness in preventing sexually transmitted infections and unintended pregnancies.

However, when it comes to recycling condoms, there are limited options available. Condoms are typically made of latex or polyurethane, both of which aren’t easily recyclable. Therefore, it’s best to dispose of condoms in the trash after use.

Some countries have implemented condom disposal programs where used condoms are collected and incinerated to generate energy. This helps to minimize the environmental impact of condom waste.

toilet tower defense codes 2023

It’s important to raise awareness about proper condom disposal and encourage responsible use to reduce waste and protect our environment.

Disposal Methods for Used Condoms

Continuing from the previous subtopic, I found limited options for recycling condoms, but now let’s discuss the disposal methods for used condoms.

When it comes to the proper disposal of used condoms, the most common method is to throw them in the trash. However, it’s important to note that condoms shouldn’t be flushed down the toilet as they can cause plumbing issues and contribute to environmental pollution.

As for recycling options, there are currently limited options available. Condoms are made of latex, which is a type of rubber, and recycling facilities may not accept them due to potential contamination.

toilet tower defense codes ep 58

Alternatively, some suggest incineration methods as a way to dispose of used condoms, as this can help reduce the spread of sexually transmitted infections and prevent unwanted pregnancies.

It’s crucial to prioritize safe and responsible condom disposal to protect both the environment and public health.

Environmental Impact of Condom Waste

Moving on to the environmental impact of condom waste, let’s delve into how the disposal of used condoms can affect our surroundings. Improper disposal of condoms can have a detrimental impact on the environment. When condoms end up in landfills, they contribute to the growing problem of non-biodegradable waste. These non-biodegradable materials take hundreds of years to break down, leading to pollution and harm to ecosystems.

However, there are solutions to mitigate this environmental impact. Some recycling initiatives have been implemented to reduce condom waste. Additionally, biodegradable options, such as condoms made from natural latex or other biodegradable materials, are being developed and promoted. These alternatives offer a more sustainable option for condom users.

toilet tower defense script

Transitioning into the subsequent section about alternatives to landfill disposal, let’s explore some of these options in more detail.

Alternatives to Landfill Disposal

To address the issue of condom waste, let’s explore some alternatives to landfill disposal. There are several options available that can help reduce the environmental impact of discarded condoms:

  1. Recycling options: Some organizations are working towards developing recycling programs for condoms. These programs aim to collect used condoms and recycle them into new products, such as rubberized materials or even eco-friendly sex toys.
  2. Biodegradable alternatives: Another solution is to use condoms made from biodegradable materials. These condoms are designed to break down naturally over time, reducing their impact on the environment. They’re often made from materials like natural latex, which is biodegradable and derived from sustainable sources.
  3. Proper disposal: Educating individuals about the importance of properly disposing of condoms is crucial. Encouraging people to wrap used condoms in tissue or toilet paper and dispose of them in the trash, rather than flushing them down the toilet, can help prevent unnecessary waste and pollution.
  4. Reusable options: Reusable condom options, such as silicone-based or latex-free condoms, are gaining popularity. These condoms can be washed and reused multiple times, reducing the amount of waste generated.

Raising Awareness and Promoting Sustainable Condom Use

I actively promote sustainable condom use and raise awareness about its importance.

One of the key aspects of promoting sustainability in condom use is the manufacturing process. Sustainable condom manufacturing involves using materials and processes that have a minimal environmental impact.

toto toilets parts

This includes using natural latex from sustainable sources and implementing energy-efficient production methods.

Additionally, the use of biodegradable condom options is crucial in reducing the environmental footprint of condom disposal. Biodegradable condoms are made from materials that break down naturally over time, reducing the amount of waste that ends up in landfills.

Frequently Asked Questions

Are There Any Health Risks Associated With Using Condoms That Are Disposed of in Landfills?

Using condoms disposed of in landfills can have health implications and environmental impact. Proper disposal methods, such as wrapping them in tissue or using biodegradable condoms, can reduce these risks.

Can Condoms Be Recycled or Repurposed in Any Way?

Condoms can be recycled or repurposed in innovative ways. Recycling options include programs that collect and sterilize used condoms for reuse. Additionally, there are initiatives exploring the use of biodegradable and sustainable materials for condom production.

toilet tower defense codes

What Are the Potential Risks to Wildlife and Marine Life From Condom Waste in Landfills?

The potential risks to wildlife and marine life from condom waste in landfills include entanglement, ingestion, and chemical contamination. It is important to explore potential solutions and alternative options to minimize these impacts.

Are There Any Regulations or Guidelines in Place Regarding the Disposal of Condoms?

There are regulations and guidelines in place regarding the disposal of condoms. It’s important to follow these guidelines to ensure proper waste management and prevent any potential harm to the environment.

How Can Individuals Contribute to Reducing Condom Waste and Promoting Sustainable Condom Use in Their Daily Lives?

To reduce waste and promote sustainable condom use, I can choose biodegradable or eco-friendly options. Additionally, I can support organizations that recycle condoms or offer safe disposal methods. It’s important to prioritize the environment in our daily choices.

Conclusion

Well, it turns out that our trusty condoms do indeed end up in the landfill after we’re done with them. It’s a shame that such a vital tool in safe sex practices meets such a lackluster fate.

toilet parts in tank

But fear not, for there are alternatives to landfill disposal and ways to raise awareness about sustainable condom use.

Let’s strive for a world where our condoms can have a more fulfilling afterlife than just rotting away in a pile of garbage.

With an impeccable eye for detail and a passion for bathroom-related, Ava leads our editorial team gracefully and precisely. Under her guidance, Best Modern Toilet has flourished as the go-to resource for modern bathroom enthusiasts. In her free time, you might find Ava exploring antique shops and looking for vintage bathroom fixtures to add to her collection.

Continue Reading

Bathtub

How to Paint a Bathtub White

Published

on

By

An image that showcases a step-by-step transformation of a worn-out bathtub into a pristine white masterpiece

Are you tired of looking at your old, worn-out bathtub that no longer matches your bathroom decor? Did you know that you can easily give it a fresh new look by painting it white?

In fact, painting a bathtub white is a popular DIY project that can completely transform the appearance of your bathroom. In this article, we will guide you through the step-by-step process of preparing the surface, choosing the right paint and supplies, and applying the paint to achieve a beautiful, white bathtub that will make your bathroom shine.

Key Takeaways

  • Thoroughly clean the bathtub surface before painting.
  • Choose a paint specifically designed for use in bathrooms or on tub surfaces.
  • Properly clean and sand the bathtub to create a rough texture for better paint adhesion.
  • Apply a high-quality primer and a durable, high-gloss acrylic paint as the base coat.

Preparing the Bathtub Surface

Now, you’ll want to start by thoroughly cleaning the bathtub surface before you can begin painting it white.

Proper preparation is essential for a successful bathtub refinishing or reglazing project. To clean the surface, you’ll need to remove any soap scum, dirt, or grime that may have accumulated over time. Start by using a mild detergent or bathtub cleaner and a non-abrasive sponge to scrub the entire surface. Make sure to pay extra attention to any areas with stubborn stains.

After cleaning, rinse the bathtub thoroughly with water to remove any residue. Once the surface is clean and dry, you’ll be ready to move on to the next step of the painting process.

Choosing the Right Paint and Supplies

Before you start, make sure you have all the necessary supplies and the right type of paint.

When it comes to choosing the right paint colors for your bathtub, it’s important to consider a few factors. Firstly, opt for a paint that is specifically designed for use in bathrooms or on tub surfaces. These paints are formulated to withstand moisture and provide long-lasting results.

Secondly, select a color that complements your bathroom decor and personal style. Whites and neutrals are popular choices for a clean and timeless look.

Now, let’s talk about tips for a smooth and even application. Start by thoroughly cleaning the bathtub surface and removing any old paint or residue. Use a high-quality brush or roller to apply the paint in thin, even coats, following the manufacturer’s instructions. This will help prevent drips and ensure a professional-looking finish.

Once you have finished painting, allow the bathtub to dry completely before moving on to the next step: cleaning and sanding.

Cleaning and Sanding the Bathtub

To get started on cleaning and sanding your bathtub, make sure you gather all the necessary cleaning supplies and sandpaper. Here are four important steps to follow for effective cleaning and sanding:

  1. Clean the surface: Begin by removing any dirt, grime, or soap scum from the bathtub using a mild cleaner and a sponge or soft cloth. Make sure to thoroughly rinse the tub afterward to remove any residue.

  2. Remove old finishes: If your bathtub has any old paint or coatings, use a chemical paint stripper or a heat gun to carefully remove them. Follow the manufacturer’s instructions and take appropriate safety precautions.

  3. Sand the surface: Once the bathtub is clean and free of any old finishes, use fine-grit sandpaper to lightly sand the surface. This will create a rough texture for better paint adhesion. Be sure to sand evenly and remove any dust or debris afterward.

  4. Prepare the tub for painting: After sanding, wipe down the bathtub with a damp cloth to remove any remaining dust. Allow the tub to dry completely before moving on to the next step in the painting process.

Applying the Primer and Base Coat

After sanding and cleaning the surface, it’s time to apply the primer and base coat to ensure a smooth and long-lasting finish.

Prepping the surface properly is crucial for the success of your bathtub painting project. Begin by wiping down the sanded surface with a damp cloth to remove any dust or debris.

Next, apply a high-quality primer specifically designed for use on bathtubs. The primer will create a strong bond between the surface and the top coat, ensuring better adhesion and durability. Follow the manufacturer’s instructions regarding the drying time for the primer.

Once the primer has dried, it’s time to apply the base coat. Choose a durable, high-gloss acrylic paint formulated for use on bathtubs. Apply the base coat evenly using a roller or brush, and allow it to dry completely before applying additional coats if necessary.

Remember to follow the recommended drying time for each coat to achieve the best results.

Finishing and Sealing the Painted Bathtub

Once the final coat of paint has dried, it’s important to seal the painted bathtub with a clear, waterproof sealant to protect the finish and ensure its longevity. Here are four key points to consider when finishing and sealing your painted bathtub:

  1. Long term durability: Applying a sealant to your painted bathtub helps to enhance its durability and protect it from daily wear and tear. It creates a barrier that prevents water, chemicals, and stains from penetrating the paint, extending the lifespan of your bathtub.

  2. Professional vs. DIY: Hiring a professional to paint and seal your bathtub ensures a high-quality finish and expert application of the sealant. However, undertaking the task yourself can save you money. Consider your skill level, time constraints, and desired results before making a decision.

  3. Choosing the right sealant: Selecting a clear, waterproof sealant specifically designed for painted surfaces is crucial. Look for a product that is resistant to moisture, chemicals, and UV rays. Follow the manufacturer’s instructions for application and drying time.

  4. Maintenance and reapplication: Over time, the sealant may wear off due to regular use. It’s important to periodically check the condition of the sealant and reapply as necessary to maintain its protective properties and ensure the long-term durability of your painted bathtub.

Frequently Asked Questions

How Long Does It Take for the Painted Bathtub to Fully Dry and Cure?

To fully dry and cure a painted bathtub, it typically takes about 24-48 hours. During this time, make sure the area is well-ventilated and avoid using the tub to ensure the paint properly sets.

Can I Paint Over a Bathtub That Has Been Previously Painted?

Yes, you can use epoxy paint for painting a bathtub. However, there are potential risks when painting over a previously painted bathtub such as peeling or chipping. Proper preparation and priming are crucial to ensure a successful outcome.

Is It Necessary to Remove the Bathtub Fixtures Before Painting?

Before diving into the painting process, you might be wondering if removing the bathtub fixtures is necessary. Well, let me tell you, it is absolutely essential! This step ensures a smooth and professional finish. Don’t skip it!

Can I Use Regular Household Paint for Painting a Bathtub?

You can’t use regular household paint for painting a bathtub. There are toxicity concerns and the paint won’t adhere properly. Look for suitable bathtub paints that are specifically designed for this purpose.

What Is the Recommended Maintenance for a Painted Bathtub?

To maintain a painted bathtub, use recommended cleaning products and regularly clean it. Repaint the bathtub as needed, depending on factors like usage and wear.

Conclusion

Congratulations! You’ve successfully transformed your bathtub into a beautiful white oasis. By following the steps outlined in this article, you’ve learned how to:

  • Prepare the surface
  • Choose the right paint and supplies
  • Clean and sand the bathtub
  • Apply the primer and base coat
  • Finish and seal the painted bathtub

Remember, painting a bathtub may seem like a daunting task, but with a little patience and the right techniques, you can turn your old, worn-out bathtub into a stunning centerpiece that will make you feel like you’re bathing in luxury.

So go ahead, dive in and enjoy your newly painted bathtub!

Continue Reading

Bathtub

How to Install Bathtub Stopper

Published

on

By

An image showcasing a step-by-step guide to installing a bathtub stopper

Are you tired of dealing with a leaky bathtub stopper?

Well, I’ve got good news for you! In this article, I’m going to show you step-by-step how to install a new bathtub stopper.

With just a few tools and materials, you’ll be able to replace that old stopper and enjoy a properly functioning drain in no time.

So, let’s get started and say goodbye to those annoying bathtub leaks once and for all!

Key Takeaways

  • Regular maintenance is important to ensure proper functionality of bathtub stoppers.
  • Common problems with bathtub stoppers include loose stoppers, improper sealing, and clogs.
  • Removing the old bathtub stopper involves unscrewing the cap, pulling up to remove the stopper, and inspecting for damage or buildup.
  • Installing and adjusting the new bathtub stopper includes measuring the drain diameter, choosing the right stopper type, applying plumber’s putty for a watertight seal, and testing for proper sealing.

Required Tools and Materials

You’ll need a few tools and materials to install the bathtub stopper. First, gather a pair of pliers, a screwdriver, and an adjustable wrench. Additionally, make sure you have a new bathtub stopper, plumber’s putty, and Teflon tape.

Proper maintenance of bathtub stoppers is important to ensure their longevity and functionality. Regular cleaning and removal of any debris or hair buildup will prevent clogs and keep the stopper working properly. If the stopper is leaking, it may need to be replaced or repaired.

Common problems with bathtub stoppers include a loose stopper or one that doesn’t seal properly. Tightening the stopper’s screw or adjusting the linkage can often solve these issues. If the stopper is damaged, replacing it with a new one is usually the best solution.

Removing the Old Bathtub Stopper

To remove the old bathtub stopper, simply unscrew the cap counterclockwise. This is usually located in the center of the stopper. Once the cap is removed, you can see the mechanism that holds the stopper in place.

Here are some steps to guide you through the process:

  • Pull up on the stopper to remove it from the drain.
  • Inspect the stopper for any damage or buildup that may be causing common stopper problems, such as clogs or leaks.
  • Clean the stopper using a brush and mild soap to remove any debris or grime.
  • If the stopper is damaged beyond repair, consider replacing it with a new one.

Now that you have successfully removed the old bathtub stopper, let’s move on to the next section on installing the new stopper.

Installing the New Bathtub Stopper

Once you’ve removed the old bathtub stopper, it’s time to move on to installing the new one. Here are some step-by-step instructions to help you successfully install your new bathtub stopper.

  1. Measure the drain: Before purchasing a new stopper, measure the diameter of your drain to ensure a proper fit.

  2. Choose the right stopper: Consider your needs and preferences when selecting a stopper. There are various types available, such as pop-up stoppers, push-pull stoppers, and toe-touch stoppers.

  3. Apply plumber’s putty: Roll a small amount of plumber’s putty into a rope-like shape and apply it around the drain opening. This will create a watertight seal.

  4. Insert the stopper: Place the stopper into the drain and push it down firmly. Make sure it sits flush with the bathtub surface.

  5. Test the stopper: Fill the tub with a small amount of water and check if the stopper seals properly. Adjust if necessary.

Common mistakes to avoid when installing a bathtub stopper include not measuring the drain correctly and not applying enough plumber’s putty.

Adjusting the Stopper for Proper Drainage

Make sure the stopper is properly adjusted to ensure proper drainage of the bathtub. Adjusting the stopper is an important step in maintaining an efficient drainage system. Here are some common mistakes to avoid when adjusting the stopper for proper drainage:

  • Not checking for debris: Before adjusting the stopper, make sure to remove any hair or debris that may be blocking the drain. This will prevent clogs and ensure smooth water flow.

  • Incorrect positioning: Ensure that the stopper is placed correctly in the drain. Improper positioning can lead to water leakage and poor drainage.

When it comes to the types of bathtub stoppers, there are a few options to consider. Each type has its own pros and cons for drainage:

  • Pop-up stoppers: These are common in modern bathtubs and are easy to use. They provide good drainage, but can sometimes get clogged with hair.

  • Toe-touch stoppers: These are operated by pressing down with your foot. They offer good drainage and are easy to clean.

Testing and Troubleshooting the Bathtub Stopper

Check if the stopper is functioning properly by testing its ability to hold water in the bathtub. This is an important step to troubleshoot common problems with bathtub stoppers.

Here’s how to fix a stuck bathtub stopper:

  1. Fill the bathtub with water.
  2. Pull up on the stopper to close the drain.
  3. Wait for a few minutes to see if the stopper holds the water.
  4. If the water starts to drain, the stopper might be faulty.
  5. Remove the stopper by twisting it counterclockwise or unscrewing it.
  6. Clean the stopper and the drain hole.
  7. Apply lubricant to the stopper if it’s sticking.
  8. Reinstall the stopper by twisting it clockwise or screwing it back in.
  9. Test the stopper again to ensure it holds the water properly.

Conclusion

In conclusion, installing a bathtub stopper is a fairly simple process that can be done with just a few tools and materials. By following the step-by-step instructions provided in this article, you will be able to remove the old stopper, install the new one, adjust it for proper drainage, and test it for any troubleshooting.

Remember, having a functional bathtub stopper is crucial for ensuring a relaxing and enjoyable bath experience. For example, imagine coming home after a long day and looking forward to a soothing bath, only to find that your bathtub stopper is broken. By following the steps outlined in this article, you can easily replace the stopper and enjoy your bath without any worries.

Continue Reading

Bathtub

How to Remove the Stopper From a Bathtub

Published

on

By

An image showcasing a pair of gloved hands firmly grasping a chrome stopper knob in a bathtub

Are you tired of dealing with a stubborn bathtub stopper that refuses to budge? Well, look no further! In this article, we will guide you through the step-by-step process of removing the stopper from your bathtub.

With just a few simple tools and a little bit of know-how, you’ll be able to conquer this task like a pro. So, get ready to bid farewell to that pesky stopper and say hello to a smoothly functioning bathtub!

Key Takeaways

  • Gather the necessary tools such as a flathead screwdriver, pliers, drain key or wrench, and silicone-based lubricant.
  • Identify the type of bathtub stopper (lift-and-turn, toe-touch, push-pull, or pop-up) and troubleshoot common problems associated with each type.
  • Remove a lift-and-turn stopper by twisting it counterclockwise, applying steady pressure, and using pliers if needed.
  • Remove a push-pull stopper by wiggling it back and forth to loosen, using pliers if necessary, and alternatively unscrewing the overflow plate to access the stopper mechanism.

Gathering the Necessary Tools

First, you’ll need to gather all the necessary tools to remove the stopper from your bathtub. There are different types of bathtub stoppers, each with its own function. The most common types include the lift-and-turn, push-and-pull, toe-touch, and trip-lever stoppers.

To remove these stoppers, you’ll require a few basic tools. Start by getting a flathead screwdriver, a pair of pliers, and a drain key or a drain wrench. These tools will help you tackle common problems with bathtub stoppers.

If your stopper is not moving or is stuck, try lubricating it with a silicone-based lubricant. If the stopper is not sealing properly, check for any debris or hair that might be blocking the drain and clean it out.

Identifying the Type of Bathtub Stopper

To figure out what type of stopper you have, take a look at the mechanism underneath the drain. There are different types of bathtub drain stoppers, each with its own unique design.

The most common types include the lift-and-turn, toe-touch, push-pull, and pop-up stoppers. The lift-and-turn stopper requires you to twist it counterclockwise to release it, while the toe-touch stopper can be opened and closed by simply pushing it with your toe. The push-pull stopper is operated by pulling it up or pushing it down, and the pop-up stopper is controlled by a lever located on the overflow plate.

Common problems with bathtub stoppers include clogs, leaks, and stoppers that won’t stay in place. By identifying the type of stopper you have, you can easily troubleshoot and fix any issues that may arise.

Removing a Lift-And-Turn Stopper

Now you’ll need to twist the lift-and-turn stopper counterclockwise in order to release it. This step is crucial when dislodging a stuck lift and turn stopper from your bathtub.

Start by gripping the stopper firmly and turning it in the opposite direction of its normal position. Apply steady pressure as you twist, being careful not to force it too hard. If the stopper is still stuck, you may need to use a pair of pliers for extra leverage.

Once the stopper is free, you can inspect it for any damage or wear. If necessary, you can easily replace a lift and turn stopper with a new one by following the same steps in reverse.

Now, let’s move on to the next section where we will discuss removing a push-pull stopper.

Removing a Push-Pull Stopper

If you’re having trouble with a push-pull stopper, try wiggling it back and forth to loosen it.

Common troubleshooting issues with push-pull stoppers include them getting stuck or not sealing properly.

If the stopper is stuck, you can use pliers to grip the knob and gently twist it counterclockwise to release it.

If the stopper doesn’t seal properly, you may need to clean the drain and stopper thoroughly to remove any debris or buildup.

Another alternative method for removing a push-pull stopper is to unscrew the overflow plate located behind the bathtub.

Once the plate is removed, you can access the stopper mechanism and unscrew it to remove the stopper completely.

Now let’s move on to the next section about removing a toe-touch stopper.

Removing a Toe-Touch Stopper

The toe-touch stopper can be easily loosened by pressing down on it with your foot and rotating it counterclockwise. This type of stopper is commonly found in many bathtubs and is known for its convenient operation. However, over time, it may need to be replaced or encounter common issues that require troubleshooting.

Replacing a toe-touch stopper is a straightforward process. First, remove the old stopper by following the steps mentioned above. Then, you can purchase a new stopper from a local hardware store or online retailer. Make sure to choose a stopper that is compatible with your bathtub’s drain size.

In order to troubleshoot common bathtub stopper issues, refer to the table below:

Issue Possible Cause Solution
Stopper not sealing Debris or worn-out gasket Clean or replace gasket
Stopper not releasing Mechanism jammed Lubricate or replace mechanism
Stopper not moving Loose linkage Tighten or replace linkage

Frequently Asked Questions

How Often Should I Remove the Bathtub Stopper for Cleaning or Maintenance?

You should remove the bathtub stopper for cleaning or maintenance at least once every few months. Regular removal helps prevent buildup on the stopper and allows you to clean the drain without removing it.

Can I Use the Same Method to Remove Any Type of Bathtub Stopper?

To remove any type of bathtub stopper, start by identifying the specific style you have. Once you know that, follow the appropriate removal method. Troubleshoot common issues like stuck stoppers by applying lubricant or using a plunger.

Is It Necessary to Remove the Bathtub Stopper to Unclog the Drain?

To unclog a bathtub drain without removing the stopper, you can try using a plunger. However, if the clog persists, removing the stopper may be necessary. Signs indicating a stopper replacement include leaks or difficulty in opening or closing.

What Should I Do if I Accidentally Break the Stopper While Removing It?

If you accidentally break the stopper, don’t panic! Repair options depend on the type of stopper. Check online or visit a hardware store to find a replacement. Remember, there’s always a solution!

Are There Any Alternative Methods to Remove a Stuck or Stubborn Bathtub Stopper?

To safely remove a stuck or stubborn bathtub stopper, there are alternative methods you can try. These methods will allow you to remove the stopper without damaging it.

Conclusion

In conclusion, removing the stopper from your bathtub is a relatively simple process that can be done with the right tools and a little bit of know-how. By following the steps outlined in this article, you can easily remove a lift-and-turn, push-pull, or toe-touch stopper.

While some may argue that hiring a professional plumber is a better option, with the right tools and a bit of patience, you can successfully remove the stopper yourself and save some money in the process.

So go ahead and give it a try!

Continue Reading

Trending