I Have Been Using AI For A Creative Maker Project
AIThis post was created with the assistance of artificial intelligence (AI).

TL;DR

A ToolGuyd report describes using Google Gemini to generate editable OpenSCAD code for parts of a Fallout-inspired Halloween prop. The code helped the maker visualize and prototype components, but required repeated prompting and manual changes; the finished prop has not yet been built.

A maker is using Google Gemini to generate OpenSCAD code for parts of a Fallout-inspired Halloween prop, using the editable designs to test shapes before building a physical version. The project is still in development: the maker reports that AI output needed repeated prompting and manual edits, and the final prop has not yet been completed.

Before you orderOffer from Amazon

Get home appliances delivered free with Prime

  • Fast, free delivery on millions of items
  • Prime Video, Amazon Music and more included
  • Member-only deals all year
Start your free Prime trial Free trial for eligible customers · Cancel anytime
As an affiliate, we earn on qualifying purchases.

The project began with a costume idea for the maker’s son, who wanted a look connected to Fallout 4. Full DIY power armor was judged unrealistic within the available time, so the plan shifted to a more modest costume with a decorated chest piece and a distinctive prop. After a low-cost motorcycle chest protector ordered online was delayed and apparently lost, the maker said the costume would likely use foam and craft materials instead.

For the prop, the maker used Gemini to help develop a truncated-cone shape with a mounting ring. After several iterations, the AI supplied OpenSCAD code that the maker could adjust by changing parameters. A test print was described as good enough to continue, despite being made with filament that was too wet. The next version is planned to be larger and include holes for attaching it to a wooden box.

The maker also used generated code to explore a handle and other parts. In one example, Gemini did not follow instructions about the placement of arms and pill-shaped holes, and added chamfers the maker did not want. The maker later modified the code, including adding mounting-plate holes and changing slot dimensions, and began printing a low-density version. These are prototype steps, not evidence that the design is ready for use or that the finished prop has been assembled.

At a glance
reportWhen: Ongoing project reported ahead of Hallo…
The developmentA maker is using Gemini-generated OpenSCAD code to develop and 3D-print prototype components for a Fallout-inspired Halloween costume prop.

AI as a Prototype Partner

The report offers a practical example of generative AI being used as a bridge from an idea to a testable model. The maker says visualizing an object that has not yet been fully designed is a challenge; generated OpenSCAD code provided a starting geometry that could be inspected, printed and revised. Because the code is parameterized, the maker could alter dimensions without starting every iteration from scratch.

The account also shows the limits of that assistance. Gemini’s output did not consistently respect design constraints, and the maker had to identify errors, adjust parameters and decide how parts might fit together. AI supported some of the early modeling work, but did not replace the maker’s judgment about assembly, materials or the overall design. For hobbyists, the distinction matters: a generated model can speed up exploration, while still requiring hands-on review and testing before a part is relied on.

The project’s deadline shapes those choices. The maker is considering attaching individually designed parts to a small wooden box with screws or adhesive, rather than rebuilding the entire object as a single coordinated model. That approach may help produce a rough first version in time, but the report does not establish how durable or functional the completed prop will be.

Products Worth Considering

As an affiliate, we earn on qualifying purchases.

From Costume Idea to Printed Parts

The ToolGuyd report describes a personal maker project rather than a product launch or a controlled evaluation of AI tools. The stated goal is a Halloween costume connected to Fallout 4, with a scavenged, wasteland-inspired appearance. The maker considered a hard hat and a flashlight for the costume and focused on making a custom prop prominent enough to contribute to the look.

The maker had experience modeling objects already familiar to them, but said designing a new object was harder when its shape was not yet clear. They chose OpenSCAD because the generated code could be edited through parameters. Other AI services might produce a fuller model, the report says, but the maker found the code-based route useful for this project. They also considered moving later work into Fusion or similar software for more control over dimensions and assembly relationships.

Some colored fittings shown in the project were not AI-generated designs: the maker said they were based on McMaster-Carr 3D files and used to check how air fittings and quarter-inch inner-diameter hoses might fit into the assembly. The maker had not decided whether to use inexpensive metal fittings, describing the test as a way to avoid ordering too many options.

“The AI made a lot of mistakes, and I’m also learning how to better constrain dimensions in my prompts.”

— The ToolGuyd report’s author

The Final Prop Is Unfinished

The report does not say whether the planned Halloween prop was completed, how it performed after assembly or whether the low-density handle print succeeded. The maker described a rough first version as the immediate goal, with possible later revisions, but gave no confirmed completion date or final materials list.

It is also unclear whether the maker will keep using OpenSCAD for the full design or remodel parts manually in Fusion or comparable software. The exact arrangement of external wires, fittings and other components had not been settled. Gemini’s suggested breakdown of a reference fantasy tool into printable subassemblies was described as not very helpful, and there is no indication that the proposed design was tested as a complete assembly.

Next Steps Before Halloween

The maker’s stated next step is to print and assess the revised parts, then build a rough first version around a small wooden box. The planned design may use screws, glue or other adhesives to attach separately modeled components. The maker said the final color might be black and that a later redesign could offer more control over how dimensions depend on one another.

The maker also plans to build the prop with their son, who can decide what the fictional device will be called. Whether the project reaches a more polished version before Halloween remains unconfirmed. For now, the reported result is an ongoing experiment: AI-generated code has helped produce editable prototypes, while design decisions, assembly and revisions remain with the maker.

Key Questions

What is the maker using Gemini for?

The maker used Gemini to generate OpenSCAD code for shapes and components in a Fallout-inspired Halloween prop, then edited parameters and printed prototypes.

Is the prop finished?

No. The report describes prototype prints and a plan for a rough first version. It does not confirm that the prop was assembled or completed.

What problems did the AI-generated designs have?

The maker said Gemini missed instructions about component placement and hole locations and added unwanted chamfers. Repeated prompting and manual code changes were needed.

Why use OpenSCAD code instead of a finished 3D model?

The report says the code let the maker adjust parameters such as dimensions and slots. The maker also considered using Fusion or similar software for more direct control over the larger assembly.

What happens to the design next?

The maker plans to test revised prints and assemble components on a small wooden box. The schedule and final design are not confirmed.

Source: rss

You May Also Like

Revisiting David Hockney’s House on the West Coast With a One-of-a-Kind Painted Swimming Pool

David Hockney’s hillside house on the West Coast has been reimagined with a unique painted motif, reflecting his artistic style and influences.

Dakota Johnson’s $6 Million West Hollywood House Just Found a Buyer

Dakota Johnson’s $6 million West Hollywood house is under contract after just a week on the market, with the final sale price to be disclosed after closing.

Water Outage Scheduled In Bogotá Neighborhoods August 11-13

Bogotá authorities announce scheduled water outages from August 11 to 13, affecting multiple neighborhoods. Details on affected areas and duration included.

Yup, US Solar Growth Hurting from Solar Permitting Delays

Federal permitting delays are significantly hindering US solar project development, risking stagnation despite falling costs and rising demand.