If your Bissell carpet cleaner isn’t pulling up water and dirt as it should, it can be frustrating. Often, the cause is a simple clog, filter issue, or a problem with the brushroll or hose. This guide provides clear, step-by-step troubleshooting to help you restore suction and get back to effective cleaning.
Get home appliances delivered free with Prime
- Fast, free delivery on millions of items
- Prime Video, Amazon Music and more included
- Member-only deals all year
Key Takeaways
| Check for clogs | Clogged hoses or filters reduce suction power. |
| Inspect filters and brushes | Dirty filters or worn brushes hinder cleaning efficiency. |
| Ensure proper assembly | Incorrect setup can cause suction loss. |
| Clean the water intake area | Build-up can block water flow and suction. |
| Test after each step | Identify the specific cause for better results. |
Step 1: Power Off and Unplug
Before inspecting your cleaner, ensure it is turned off and unplugged from the power outlet. This is essential for safety and prevents any accidental activation during troubleshooting.
Step 2: Check and Clear the Hoses and Intake
- Detach the water and dirt collection tanks, then remove the hose from the cleaner.
- Inspect the hose for blockages or debris. Gently run water through the hose to clear any clogs.
- Reattach the hose securely once clear.
Step 3: Clean or Replace Filters and Brushroll
- Remove the filters (refer to your model’s manual for exact placement). Wash them with warm water and let dry thoroughly. Replace if damaged or excessively dirty.
- Check the dual DirtLifter PowerBrushes for hair, debris, or tangled fibers. Clean thoroughly to ensure proper contact with carpets.
Step 4: Inspect and Clean the Water Heating System
If your model uses HeatWave Technology, ensure the water is heated properly and the system isn’t clogged. Use a damp cloth to wipe the water intake area and check for blockages.
Step 5: Test the Cleaner
Reassemble all parts, fill the tanks with clean water and suitable cleaning solution, then turn the cleaner on. Test it on a small area to verify suction has been restored.
The Products in This Guide
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet C
- ✔ Weight: 18.5 lbs
- ✔ Tank Capacity: 1.25 gallons
- ✔ Cord Length: 25 ft
JORAIR Brush Replacement Compatible
- ✔ Weight: 1.2 lbs
- ✔ Material: Polyester and foam
- ✔ Usage: Replace every 3-6 months
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet C
The BISSELL ProHeat 2X Revolution Pet Turbo is designed with TurboStrength Motor Technology, delivering 40% more suction power and quieter operation. Proper maintenance can resolve suction issues effectively.
Pros:
- Strong suction power for embedded dirt
- Quiet operation with noise reduction
- Effective stain and allergen removal
- Multiple cleaning modes
Cons:
- May require regular filter cleaning
- Hose and brush maintenance needed
- Can be heavy for some users
Best for: Deep cleaning heavily soiled carpets and pet stains
Not ideal for: Light surface cleaning or quick touch-ups
Bottom line: A powerful, versatile carpet cleaner with high suction and deep cleaning capabilities.
JORAIR Brush Replacement Compatible
The JORAIR Brush Replacement set offers compatible brushes and filters for Bissell CrossWave, which can enhance cleaning performance and replace worn parts.
Pros:
- Compatible with multiple CrossWave models
- Includes 3 brush rolls and filters
- Affordable and easy to install
- Improves cleaning efficiency
Cons:
- Only for CrossWave models, not ProHeat
- Needs regular replacement for best results
- Limited to specific models
Best for: Maintaining optimal brush and filter condition in CrossWave
Not ideal for: For ProHeat or other Bissell models
Bottom line: A cost-effective way to keep your CrossWave running smoothly.
Frequently Asked Questions
Why does my Bissell cleaner have no suction?
Common causes include clogged hoses, dirty filters, worn brushes, or water intake blockages. Regular maintenance and cleaning usually resolve the issue.
How often should I clean the filters?
Check filters every 1-3 months, washing them with warm water and replacing if damaged or excessively dirty.
Can I use regular household water instead of warm water?
It’s recommended to use warm water with cleaning solutions for optimal performance, especially if your model features Heatwave technology.
What should I do if the cleaner still has no suction after troubleshooting?
Contact Bissell customer support or consider professional repair if basic cleaning steps do not restore suction.
Restore Your Carpet Cleaner’s Power for a Fresh Home
By following these troubleshooting steps, you can often resolve suction issues with your Bissell ProHeat 2X Revolution Pet Turbo. Regular maintenance, including cleaning filters, hoses, and brushes, ensures your machine performs at its best for a deep, effective clean. If problems persist, professional repair or contacting Bissell support may be necessary to keep your carpets spotless.
Affiliate disclosure: As an Amazon Associate we earn from qualifying purchases. Prices and availability are accurate as of the time of publishing.
Cold & flu season Picks
humidifiers
As an affiliate, we earn on qualifying purchases.
