Buying Guides
How Much Does It Cost Each Time You Flush the Toilet
Have you ever stopped to consider the cost of something as seemingly trivial as flushing the toilet? Well, my friends, let me enlighten you.
Each time we flush, we are not only using water, but we are also consuming energy and impacting our monthly utility bills. And that’s not all – there are also environmental consequences to our flushing habits.
But fear not, for in this article, we will delve into the hidden costs of toilet flushing and provide you with tips to save some much-needed cash.
Let’s dive in, shall we?
Key Takeaways
- Flushing the toilet has hidden costs beyond the monthly water bill, including energy consumption.
- Implementing water conservation techniques and using water-saving devices can save money in the long run.
- Flushing the toilet contributes to monthly utility bills through water consumption and energy usage.
- The environmental consequences of flushing include water scarcity concerns, greenhouse gas emissions, and water pollution.
Water Usage: The Hidden Costs
We frequently underestimate the hidden costs of water usage. It’s important to recognize that our water consumption has a significant financial impact, beyond just the monthly water bill.
Implementing water conservation techniques can help mitigate these costs and save us money in the long run. By reducing our water usage, we not only lower our monthly bills but also contribute to the preservation of our natural resources.
Additionally, water conservation techniques can help extend the lifespan of our water infrastructure, reducing the need for costly repairs and replacements.
It’s crucial to be mindful of the financial implications of our water usage and adopt sustainable practices that not only benefit our wallets but also the environment.
Energy Consumption: A Surprising Expense
Energy consumption for flushing the toilet is a surprising expense. While we may not think about it, the act of flushing requires energy, and this can contribute to our monthly utility bills.
However, there are ways to reduce this expense through the use of energy-saving technologies and water conservation efforts. By installing low-flow toilets or dual-flush toilets, we can significantly decrease the amount of water consumed per flush, ultimately reducing the energy needed to pump and treat that water.
Additionally, implementing smart water meters and sensors can help us monitor our water usage and identify areas where we can further conserve energy.
Impact on Monthly Utility Bills
Flushing the toilet has a direct impact on our monthly utility bills in terms of water consumption and energy usage. As responsible individuals, it’s crucial to be mindful of the resources we use and find ways to minimize our expenses.
One effective method is by implementing water saving techniques and investing in water saving devices.
Water saving techniques involve simple practices that can significantly reduce water consumption. For instance, fixing leaky toilets and faucets promptly can prevent unnecessary water loss. Additionally, adjusting the flush volume or installing a dual-flush system can help regulate the amount of water used per flush.
Investing in water saving devices is another way to save on utility bills. High-efficiency toilets and low-flow showerheads are excellent options that can significantly reduce water usage without compromising functionality. These devices are designed to optimize water flow while maintaining the necessary pressure for effective use.
By employing water saving techniques and utilizing water saving devices, we can actively reduce our monthly utility bills. These cost-conscious measures not only benefit our wallets but also contribute to the preservation of our precious resources.
Let’s take charge of our consumption and make a positive impact on both our finances and the environment.
Environmental Consequences of Flushing
While flushing the toilet, it’s important to consider the environmental consequences associated with this daily activity. One of the major concerns is the amount of water wasted during each flush. According to studies, a single flush can use up to 1.6 gallons (6 liters) of water. This significant water usage contributes to water scarcity concerns, especially in regions where water resources are limited.
Toilet water waste not only depletes our precious water resources but also has other environmental implications. The treatment and disposal of wastewater require energy-intensive processes that contribute to greenhouse gas emissions. Additionally, the chemicals and contaminants present in toilet water waste can pollute water bodies, harming aquatic ecosystems and potentially affecting human health.
To mitigate these environmental consequences, it’s crucial to adopt water-saving practices such as installing low-flow toilets or using dual-flush options. These measures not only reduce water consumption but also contribute to conserving energy and minimizing pollution.
Saving Money: Tips for Reducing Toilet Flushing Costs
To reduce toilet flushing costs and save money, we can implement simple strategies that minimize water usage and promote efficiency. Here are four tips for reducing water consumption and making our toilets more eco-friendly:
- Install a dual-flush toilet: These toilets have two buttons or handles, one for liquid waste and one for solid waste. By using the appropriate flush option, we can significantly reduce water usage.
- Adjust the flush volume: Most toilets have a mechanism that allows us to adjust the amount of water used per flush. By reducing the volume, we can save water without compromising performance.
- Check for leaks: A leaking toilet can waste a significant amount of water. Regularly inspect the toilet for leaks and promptly fix any issues to prevent unnecessary water wastage.
- Use a water-saving retrofit kit: These kits are readily available and can be easily installed in existing toilets. They include devices such as flappers and fill valves that help reduce water usage.
Frequently Asked Questions
How Long Does It Take for Water to Refill the Toilet Tank After Each Flush?
On average, it takes about 30 seconds for the water to refill the toilet tank after each flush. This may seem insignificant, but over time, it can have a significant impact on water bills.
Are There Any Ways to Measure How Much Water Is Used per Flush in My Toilet?
There are several ways to reduce toilet water usage. By installing water-saving toilets, we can significantly decrease our environmental impact. It’s important to consider the cost and benefits of these measures.
Can Using a Low-Flow Toilet Help Reduce Water Usage and Costs?
Using a low-flow toilet can help reduce water usage and costs. It has a positive impact on the environment by conserving water. The benefits include lower water bills and decreased strain on water resources.
What Are Some Alternative Methods for Disposing of Waste That Can Save Money?
When looking for cost-saving options, alternative methods for waste disposal can be explored. These methods not only reduce expenses but also promote sustainability. Some options include composting, bio-digesters, and recycling systems.
Are There Any Government Regulations or Incentives Available to Encourage Water-Saving Toilet Installations?
Government incentives and water-saving regulations can encourage the installation of efficient toilets. These measures aim to reduce water consumption, which can save households money in the long run.
Conclusion
In conclusion, each time we flush the toilet, we unknowingly send money down the drain. The hidden costs of water usage and energy consumption can add up quickly, impacting our monthly utility bills.
Not only does this have a financial impact, but it also has environmental consequences. To save money and reduce our toilet flushing costs, we should consider implementing water-saving measures and being more mindful of our usage.
Let’s stop flushing our hard-earned money away and start making cost-conscious choices.
With an impeccable eye for detail and a passion for bathroom-related, Ava leads our editorial team gracefully and precisely.
Under her guidance, Best Modern Toilet has flourished as the go-to resource for modern bathroom enthusiasts. In her free time, you might find Ava exploring antique shops and looking for vintage bathroom fixtures to add to her collection.
Did you know that 90% of toilet flushing problems are due to simple issues that can easily be resolved? If you’re annoyed with your toilet not properly flushing toilet paper, we are here to offer assistance.
In this article, we’ll explore the reasons behind this issue and provide you with practical solutions. From clogged drains to low water pressure, we’ll cover it all.
So, let’s dive in and master the art of a perfectly functioning toilet!
Key Takeaways
- 90% of toilet flushing issues are caused by clogs in the drain or pipe.
- DIY methods like using a plunger or plumbing snake can effectively unclog the toilet.
- Regular maintenance and cleaning can prevent clogs.
- Using excessive amounts of toilet paper can lead to clogs.
Clogged Drain or Pipe
One common cause for a toilet not flushing paper away is a clog in the drain or pipe. When this happens, it can be quite frustrating and inconvenient.
Luckily, there are several DIY unclogging methods that you can try before resorting to professional plumbing services. One effective method is using a plunger. Make sure you have a good seal around the drain and create a strong suction by pushing and pulling the plunger vigorously.
Another method is using a plumbing snake or auger to break up the clog. Insert the snake into the drain and rotate it to dislodge the obstruction.
If these DIY methods fail to resolve the issue, it may be necessary to call in professional plumbing services to identify and fix the underlying problem. They have the expertise and specialized tools to tackle stubborn clogs and ensure that your toilet flushes paper away smoothly.
Low Water Pressure
Toilet not flushing paper away could also be caused by low water pressure, which can impede the flushing force needed to effectively clear the toilet bowl. Low water pressure can occur for various reasons, such as plumbing maintenance issues or water-saving measures implemented in the household. It is important to ensure that the water pressure in your home is sufficient for proper toilet functionality. Here are some water-saving tips to consider:
| Plumbing Maintenance | Water Saving Tips |
|---|---|
| Check for leaks in pipes | Install a low-flow toilet |
| Clean or replace clogged pipes | Use a dual-flush toilet system |
| Inspect and maintain water pump | Limit the use of toilet paper |
| Adjust water pressure regulator | Collect and reuse greywater |
| Install a pressure-boosting system | Consider a composting toilet |
Malfunctioning Flapper Valve
We’ve found that a common cause of toilets not flushing paper away is a malfunctioning flapper valve. The flapper valve is a rubber seal that sits at the bottom of the tank and controls the flow of water into the toilet bowl. When it malfunctions, it can cause a weak or incomplete flush, leading to paper not being properly flushed away.
Here are some troubleshooting steps and replacement options to consider:
- Inspect the flapper valve for any signs of damage or wear.
- Check the chain that connects the flapper valve to the flush handle, ensuring it’s properly connected and not too loose or tight.
- Clean the flapper valve and the area around it to remove any debris or mineral deposits that may be affecting its performance.
Insufficient Flush Power
To address the issue of insufficient flush power, we need to examine the water pressure in the toilet tank. The toilet tank is responsible for storing and supplying water to the toilet bowl for flushing. If the water pressure in the tank is low, it can result in a weak flush, making it difficult for the toilet to flush away paper properly.
Insufficient flush power can be caused by a variety of factors, such as a partially closed water supply valve, a clogged fill valve, or a faulty flush valve. It’s important to check these components and ensure that they’re functioning properly.
Additionally, checking the water pressure in the toilet tank and adjusting it if necessary can help improve the flush power and ensure effective paper disposal in the toilet bowl.
Incorrect Toilet Paper Usage
One factor that can contribute to a toilet not flushing paper away properly is using an excessive amount of toilet paper. When it comes to proper toilet paper disposal, it’s important to consider the following:
- Folded Sheets: Folding the toilet paper before use allows for better coverage and effectiveness. It helps prevent clumping and ensures a smoother flush.
- Moderate Usage: Avoiding excessive usage of toilet paper not only prevents clogs but also reduces the environmental impact. Using just enough to clean oneself is sufficient.
- Flushable Alternatives: Exploring alternative options like flushable wipes or bidets can reduce the dependency on toilet paper and minimize the impact on both the plumbing system and the environment.
Understanding the environmental impact of excessive toilet paper usage and adopting proper disposal techniques can prevent toilet clogs and contribute to a more sustainable lifestyle.
Conclusion
If your toilet isn’t flushing paper away, there are several possible causes. It could be due to a clogged drain or pipe, low water pressure, a malfunctioning flapper valve, insufficient flush power, or incorrect toilet paper usage.
One example of a hypothetical situation that could evoke emotion is if a family of five is constantly dealing with toilet clogs and backups due to using excessive amounts of toilet paper, leading to frustration and inconvenience.
With an impeccable eye for detail and a passion for bathroom-related, Ava leads our editorial team gracefully and precisely.
Under her guidance, Best Modern Toilet has flourished as the go-to resource for modern bathroom enthusiasts. In her free time, you might find Ava exploring antique shops and looking for vintage bathroom fixtures to add to her collection.
Ah, the pleasures of winter! While we cozy up under blankets and enjoy hot cocoa, the question arises: is it safe to flush the toilet when our pipes are frozen? Despite it seeming like a simple action, the potential risks may be more significant than anticipated.
In this article, we’ll explore the signs of frozen pipes, the dangers of flushing a frozen toilet, and the steps to safely navigate this icy predicament.
So, grab your thermos and let’s dive into the world of frozen pipes and flushing toilets!
Key Takeaways
- Lack of water flow or reduced water pressure are signs of frozen pipes.
- Thawing techniques such as using a hairdryer or heat gun can help unfreeze pipes.
- Flushing a frozen toilet can cause burst pipes due to increased pressure.
- It is important to understand the risks and consider calling a professional plumber for persistent or worsening problems.
Signs of Frozen Pipes
One of the first signs of frozen pipes is a lack of water flow in our household plumbing. When the pipes freeze, the water can’t pass through, resulting in reduced or no water flow in our faucets, toilets, and showers. This is often accompanied by a decrease in water pressure or completely no water coming out.
To address this issue, there are several thawing techniques and DIY solutions available. One common method is using a hairdryer or heat gun to gently warm the frozen pipes. Another option is to wrap the pipes with heating tape or use a space heater in the area where the pipes are located. It’s important to follow these thawing techniques carefully to avoid causing further damage to the pipes.
Now, let’s move on to discussing the risks of flushing a frozen toilet.
Risks of Flushing a Frozen Toilet
Flushing a frozen toilet can pose significant risks if the pipes are already frozen. It’s crucial to understand the consequences before attempting to flush a frozen toilet. Here are the risks involved:
- Increased blockages: Flushing a frozen toilet can cause additional debris to accumulate and further clog the already frozen pipes. This can exacerbate the problem and make it even more difficult to thaw the pipes.
- Pipe bursts: The pressure created by flushing a frozen toilet can cause the frozen pipes to burst. This can result in water damage to your property and require expensive repairs.
- Risks of using hot water: Some people may consider using hot water to thaw the pipes. However, this can cause the sudden expansion of the frozen pipes, leading to cracks or bursts.
- Contamination: Flushing a frozen toilet can cause wastewater to back up into your home, leading to unsanitary conditions and potential health risks.
Understanding these risks can help you make an informed decision about whether to attempt flushing a frozen toilet or seek professional assistance.
Steps to Safely Flush a Frozen Toilet
To safely flush a frozen toilet, we can take a few simple steps.
Firstly, it’s important to identify the cause of the frozen pipes. Common causes include cold weather, inadequate insulation, and a lack of heat in the area where the pipes are located.
Once the cause is determined, we can proceed with the thawing methods. One effective method is to use a hairdryer on a low heat setting to warm the pipes gradually.
Another method involves applying hot water or a heating pad directly to the frozen section. It’s crucial to avoid using open flames or excessive heat, as this can damage the pipes.
After thawing the pipes, the toilet should be able to flush normally. Remember to insulate the pipes to prevent future freezing.
Preventing Frozen Pipes in the Future
To prevent frozen pipes in the future, we need to take proactive measures to insulate and protect them from extreme temperatures. Here are four steps to help you prevent frozen pipes:
- Insulate pipes for winter: Use pipe insulation sleeves or heat tape to wrap exposed pipes, especially those in unheated areas such as basements, crawl spaces, and attics. This will help retain heat and prevent freezing.
- Seal air leaks: Identify any gaps or cracks in the walls, floors, or ceilings near your pipes and seal them with caulk or insulation. This will prevent cold air from entering and affecting the pipes.
- Keep the heat on: Maintain a consistent temperature in your home, even when you’re away. Set your thermostat to a minimum of 55 degrees Fahrenheit to ensure the pipes stay warm enough.
- Open cabinet doors: During extremely cold weather, open the cabinet doors under sinks to allow warm air to circulate around the pipes.
When to Call a Professional Plumber
After taking proactive measures to prevent frozen pipes, such as insulating and sealing air leaks, it’s important to know when it’s necessary to call a professional plumber.
While DIY plumbing solutions can be effective in some cases, there are situations that require the expertise of a professional.
One such situation is when you encounter a burst pipe. Burst pipes can cause significant water damage and should be addressed immediately.
Another instance when calling a professional plumber is necessary is when you’re dealing with a sewage backup. This can be a health hazard and requires emergency plumbing services to ensure proper cleanup and repair.
Additionally, if you have tried DIY methods and the problem persists or worsens, it’s best to call a professional plumber who’s the knowledge and tools to accurately diagnose and fix the issue.
Frequently Asked Questions
What Are the Common Signs of Frozen Pipes?
Yes, you can flush the toilet if the pipes are frozen. However, it’s important to thaw the pipes first using appropriate thawing methods to avoid the consequences of frozen pipes.
Can Flushing a Frozen Toilet Cause Any Damage to the Plumbing System?
Flushing a frozen toilet can potentially cause damage to the plumbing system. Before attempting to flush, it is important to take precautions such as thawing the pipes and ensuring they are not cracked or damaged.
How Can You Safely Flush a Toilet if the Pipes Are Frozen?
To safely flush a toilet when pipes are frozen, we must first thaw the pipes. Attempting to flush a frozen toilet can cause damage to the plumbing system. Consider alternative bathroom solutions until the pipes are thawed.
What Steps Can Be Taken to Prevent Pipes From Freezing in the Future?
To prevent pipes from freezing in the future, we recommend insulating pipes for winter by using materials like foam or insulation sleeves. Another option is to use heat tape, which provides continuous heat to prevent pipe freezing.
When Should You Call a Professional Plumber for Assistance With Frozen Pipes?
When to hire a plumber for frozen pipes? Look for signs like no water or low water pressure. If unsure, call a professional. Don’t risk DIY solutions. We have the expertise to fix it.
Conclusion
In the chilly battle between frozen pipes and a functioning toilet, remember to tread carefully.
Flushing a frozen toilet can lead to disastrous consequences, such as bursting pipes and water damage. It’s crucial to take the necessary steps to safely thaw the pipes before attempting to flush.
By preventing frozen pipes in the future, you can avoid this icy dilemma altogether.
If in doubt, don’t hesitate to call a professional plumber to ensure a smooth and trouble-free plumbing experience.
With an impeccable eye for detail and a passion for bathroom-related, Ava leads our editorial team gracefully and precisely.
Under her guidance, Best Modern Toilet has flourished as the go-to resource for modern bathroom enthusiasts. In her free time, you might find Ava exploring antique shops and looking for vintage bathroom fixtures to add to her collection.
Do we need to flush the toilet every time we use it? This article explores the different factors related to this inquiry.
We explore the importance of water conservation and the impact on our environment. We also consider the hygiene considerations and potential health risks associated with not flushing.
Additionally, we discuss odor control and maintaining a fresh bathroom.
Finally, we offer alternative approaches and practical tips to find the right balance between conservation and cleanliness.
Key Takeaways
- Minimizing unnecessary toilet flushing is crucial for water conservation.
- Neglecting to flush after use increases the risk of bacterial growth.
- Flushing the toilet every time removes waste and eliminates unpleasant smells.
- Dual flush toilets offer the option to use less water for liquid waste.
Water Conservation and Environmental Impact
When considering water conservation and the environmental impact, we should actively strive to minimize unnecessary toilet flushing. This practice is crucial due to its water scarcity implications and its impact on aquatic ecosystems.
Water scarcity is becoming increasingly prevalent worldwide, and every drop of water saved matters. By reducing unnecessary toilet flushing, we can conserve significant amounts of water that can be redirected to more essential uses.
Additionally, excessive flushing can have detrimental effects on aquatic ecosystems. The chemicals present in wastewater from toilets can contaminate water bodies and harm aquatic plants and animals. Therefore, it’s vital to adopt responsible flushing habits to protect our water resources and maintain the health of aquatic ecosystems.
Hygiene Considerations and Potential Health Risks
To further explore the topic of hygiene considerations and potential health risks, it is important to understand how our flushing habits can impact personal hygiene and the spread of harmful bacteria. Proper handwashing is crucial in maintaining good hygiene and preventing the spread of bacteria. After using the toilet, it is essential to wash our hands thoroughly with soap and water for at least 20 seconds. This helps remove any bacteria that may have been transferred from the toilet. Neglecting to wash our hands properly can lead to the growth and spread of harmful bacteria, increasing the risk of infections and illnesses. By flushing the toilet every time, we minimize the chances of bacterial growth and maintain a clean and hygienic environment.
| Importance of Handwashing | Risks of Bacterial Growth |
|---|---|
| Removes bacteria | Increases risk of infection |
| Prevents spread of germs | Causes illnesses |
| Maintains good hygiene | Promotes a clean environment |
| Reduces risk of contamination | Enhances personal health |
Odor Control and Maintaining a Fresh Bathroom
We can easily maintain a fresh bathroom and control odors by flushing the toilet every time. Flushing removes waste and eliminates the source of unpleasant smells.
However, in some cases, using air fresheners or natural deodorizers can enhance the freshness of the bathroom. Air fresheners can be sprayed or plugged into an outlet to release pleasant scents that mask any lingering odors. Natural deodorizers, such as baking soda or vinegar, can also be effective in neutralizing smells. These options often come in various forms, including sprays, gels, or solid products.
It’s important to choose products that are safe for the environment and don’t contain harmful chemicals. Regular cleaning and good ventilation are also essential for maintaining a fresh and odor-free bathroom.
Alternative Approaches to Flushing Every Time
One option we have to reduce the need for flushing every time is by utilizing dual flush toilets. These toilets have two flush buttons or handles, one for liquid waste and the other for solid waste. The liquid waste button uses less water, typically around 0.8 gallons per flush, while the solid waste button uses more water, usually around 1.6 gallons per flush.
By using dual flush toilets, we can significantly reduce water consumption compared to traditional single flush toilets, making them a cost-effective alternative in the long run. These water-saving methods not only help conserve water resources but also contribute to lower water bills.
Transitioning into the subsequent section about practical tips for finding the right balance, let’s explore other options for reducing the need to flush every time.
Practical Tips for Finding the Right Balance
As we continue our exploration of reducing the need to flush every time, let’s consider some practical tips for achieving the right balance.
One of the key strategies to save water is to install a dual-flush toilet. These toilets have two buttons – one for liquid waste and the other for solid waste, allowing you to choose the appropriate flush volume.
Another water-saving strategy is to place a water-filled plastic bottle or a toilet dam in the tank to displace some of the water, reducing the amount used per flush.
Efficient toilet maintenance is also essential. Regularly checking for leaks and promptly fixing them can prevent unnecessary water wastage.
Additionally, using eco-friendly cleaning products can help maintain the toilet’s efficiency while minimizing environmental impact.
Frequently Asked Questions
Can Flushing the Toilet Every Time Lead to Water Scarcity?
Flushing the toilet every time can contribute to water scarcity. Conserving water by only flushing when necessary is crucial for water conservation and reducing the environmental impact of excessive water usage.
What Are the Potential Health Risks Associated With Not Flushing the Toilet Regularly?
Not flushing the toilet regularly can lead to potential health risks. It is essential to maintain proper hygiene by flushing every time to prevent the spread of germs and bacteria.
How Can One Maintain a Fresh-Smelling Bathroom Without Flushing Every Time?
To maintain a fresh-smelling bathroom without flushing every time, we can consider eco-friendly alternatives. These may include using odor-neutralizing sprays, installing air purifiers, or utilizing natural remedies like baking soda or essential oils.
Are There Any Alternative Approaches to Flushing Every Time That Are Effective?
Alternative approaches to flushing every time can be effective in maintaining a fresh-smelling bathroom. By utilizing air fresheners, odor-absorbing gels, or regular cleaning, we can ensure a pleasant environment without compromising hygiene.
What Are Some Practical Tips for Finding the Right Balance Between Water Conservation and Maintaining Hygiene in the Bathroom?
Practical tips for reducing water usage include using a dual-flush toilet, fixing leaks promptly, and installing low-flow showerheads. Proper bathroom ventilation helps prevent mold and maintain hygiene.
Conclusion
In conclusion, while it may seem excessive to flush the toilet every time, it’s necessary for maintaining hygiene, preventing potential health risks, and controlling odors.
Additionally, it’s important for conserving water and reducing environmental impact. Finding the right balance between water conservation and maintaining hygiene is crucial.
So, let’s not shy away from the occasional hyperbole and imagine a world where toilets are left unflushed, creating a stench so powerful it can knock out a rhinoceros.
With an impeccable eye for detail and a passion for bathroom-related, Ava leads our editorial team gracefully and precisely.
Under her guidance, Best Modern Toilet has flourished as the go-to resource for modern bathroom enthusiasts. In her free time, you might find Ava exploring antique shops and looking for vintage bathroom fixtures to add to her collection.
Is Bath and Body Works on Sale Today
Can Hot Bath Lower Blood Pressure
Do Bathroom Exhaust Fans Have Filters
How Install Bathroom Exhaust Fan
Does B&Q Do Bathroom Installation
Which Countries Use Bidets the Most
Kohler Innate Smart Toilet Review [2024]
Kohler NUMI 2.0 Smart Toilet Review [2024]
Are Bleach Tablets Bad for Your Toilet
CANEST Smart Toilet Review: The Ultimate Bathroom Upgrade [2024]
-
FAQ - Advanced Bathroom Queries3 months agoWhat Happens if You Sit on the Toilet Too Long
-
FAQ - Advanced Bathroom Queries3 months agoWhy Is My Toilet so Loud When Refilling
-
Guides3 months agoToilet Water Supply Line Sizes: Finding the Right Fit
-
FAQ - Advanced Bathroom Queries3 months agoWhat Happens When You Put Baking Soda in Your Toilet
-
Guides3 months agoHow to Remove Crystallized Urine From Toilet Bowl
-
Guides3 months agoHow to Use Green Gobbler in Toilet
-
Toilet Brands3 months agoFinding the Model Number of Toto Toilets: A Guide
-
Guides3 months agoHow to Fix a Soft Close Toilet Seat