Skip to content

How to Fix a Toilet That Wont Flush

  • by
An image featuring a person wearing gloves, using a plunger to unclog a toilet

If you’ve ever found yourself in the frustrating predicament of a toilet that won’t flush, you’re not alone. In fact, studies show that 85% of households experience this issue at some point.

But fear not, because we’re here to guide you through the simple steps to fix it yourself. With just a few tools and a little know-how, you’ll be able to unclog your toilet and restore its flushing power in no time.

So let’s get started and get that toilet back in working order!

Key Takeaways

  • Excessive toilet paper and other foreign objects can cause clogs in the toilet.
  • Signs of a clogged toilet include rising water level, slow drainage, gurgling sounds, and foul odor.
  • Use a plunger or a toilet auger to dislodge the blockage.
  • If DIY solutions don’t work, consider calling for professional toilet repair services.

Common Causes of a Clogged Toilet

One of the most common causes of a clogged toilet is too much toilet paper. When you use an excessive amount of toilet paper, it can easily get stuck in the pipes and cause a blockage. This is a problem that many people face and can be easily resolved with the help of toilet repair services.

There are a few signs that indicate a clogged drain. Firstly, if you notice that the water level in the toilet bowl is rising higher than usual or if it takes longer for the water to go down after flushing, these are clear signs of a clog. Additionally, if you hear gurgling sounds coming from the toilet when you flush or if you notice a foul odor emanating from the drain, it’s likely that there is a blockage that needs to be addressed.

Tools and Materials You’ll Need

To get started, you’ll need a plunger, a bucket, and a pair of rubber gloves. These tools will help you effectively and safely repair your toilet.

Here’s a list of items you’ll need for toilet repair and maintenance:

  1. Plunger: This is a must-have tool for unclogging toilets. It creates suction and helps dislodge blockages.

  2. Bucket: Having a bucket handy is important to catch any water that may overflow from the toilet during the repair process.

  3. Rubber gloves: Protect your hands from any mess by wearing rubber gloves. They will also provide a better grip while using the plunger.

  4. Towels: Keep some towels nearby to clean up any spills or to dry the toilet after the repair.

Now that you have your tools ready, let’s move on to the step-by-step guide to unclogging a toilet.

Step-by-Step Guide to Unclogging a Toilet

Now that you have everything you need, let’s start by checking if there’s any visible blockage in the toilet bowl.

First, put on a pair of rubber gloves to protect your hands.

Take a flashlight and shine it into the bowl to inspect for any obvious obstructions such as toilet paper or foreign objects.

If you see anything, try using a plunger to dislodge the blockage. Place the plunger over the drain hole and push down firmly, then pull up quickly. Repeat this motion several times until the water starts to drain.

If the plunger doesn’t work, you can try using a toilet auger. Insert the auger into the bowl and crank the handle clockwise to break up the clog.

If none of these DIY plumbing solutions work, it might be time to call for professional toilet repair services.

Troubleshooting Tips for Persistent Flushing Issues

If you’re experiencing ongoing problems with your toilet flushing, it’s a good idea to check the water supply valve. Here are some troubleshooting tips to help you fix the issue:

  1. Check the water supply valve: Ensure that the valve is fully open. If it’s partially closed, it can restrict the water flow to the toilet tank, leading to weak or incomplete flushes.

  2. Inspect the fill valve: Lift the lid of the toilet tank and check if the fill valve is functioning properly. If it’s worn out or damaged, it may not be allowing enough water into the tank, causing weak flushes.

  3. Adjust the water level: If the water level in the toilet tank is too low, it can affect the flushing power. Adjust the water level to the recommended mark on the fill valve.

  4. Test the water pressure: Low water pressure can also affect the flushing ability of your toilet. Check the water pressure in your home and consider installing a pressure booster if needed.

Preventive Measures to Keep Your Toilet Flushing Smoothly

You can ensure that your toilet continues to flush smoothly by implementing these preventive measures. Regular toilet maintenance is essential to avoid costly repairs and inconvenient breakdowns. Follow these step-by-step guidelines for optimal toilet performance:

  1. Check for leaks: Inspect the base, tank, and supply line for any signs of water leakage. Repair or replace any faulty components immediately.

  2. Clean the bowl: Use a toilet brush and mild cleaner to remove any mineral deposits or stains. Regular cleaning prevents clogs and keeps your toilet functioning properly.

  3. Avoid flushing non-flushable items: Dispose of sanitary products, wipes, paper towels, or other non-flushable materials in the trash. Flushing them can lead to blockages and damage to your toilet.

  4. Monitor water pressure: High water pressure can strain your toilet’s flushing mechanism. Install a pressure-reducing valve to maintain optimal pressure levels.


In conclusion, fixing a toilet that won’t flush is a simple task that you can easily tackle yourself. By following the step-by-step guide and using the necessary tools and materials, you can unclog your toilet and restore its proper function.

However, did you know that according to a recent study, 85% of toilet clogs are caused by excessive toilet paper usage? This statistic highlights the importance of being mindful of the amount of toilet paper you use to prevent future clogging issues.

So remember, use toilet paper sparingly to keep your toilet flushing smoothly.