Bathtub
How to Keep Bathtub Clean

As I stepped into my bathtub one day, I couldn’t help but notice the grimy residue that had accumulated on the surface. It was time for a deep clean.
In this article, I will share my tried and tested methods to keep your bathtub sparkling and fresh. By using effective cleaning products, establishing a regular cleaning routine, and utilizing natural cleaning solutions, you can easily prevent soap scum buildup and tackle hard water stains.
Let’s dive in and discover the secrets to maintaining a pristine bathtub.
Key Takeaways
- Use a multipurpose cleaner designed for bathroom surfaces to effectively clean the bathtub.
- Regularly scrub tough stains and hard-to-reach areas with a good quality scrub brush.
- Prevent mold growth by thoroughly drying the tub after each use and using a mold inhibitor spray once a week.
- Use gentle cleaners, such as vinegar and baking soda, to prevent soap scum buildup and protect your health and the environment.
Effective Cleaning Products
Using the right cleaning products can make bathtub maintenance much easier.
When it comes to keeping my bathtub clean, I’ve found that using effective cleaning techniques and deep cleaning methods is essential.
One of my go-to products is a multipurpose cleaner that is specifically designed for bathroom surfaces. It effectively cuts through soap scum and grime, leaving my bathtub sparkling clean.
Additionally, I make sure to have a good quality scrub brush to tackle tough stains and reach those hard-to-reach areas.
For deep cleaning, I like to use a bleach-based cleaner, which helps to eliminate any bacteria or mold that may be lurking in the corners.
Regular Cleaning Routine
To maintain a tidy tub, it’s important to establish a regular cleaning routine. Here are three key steps to help prevent mold growth and remove stubborn stains:
-
Clean and rinse: Start by spraying the tub with a mild cleaning solution and scrubbing it with a non-abrasive sponge or brush. Pay extra attention to the corners and grout lines where mold can easily grow. Rinse thoroughly with warm water to remove any residue.
-
Dry thoroughly: After each use, make sure to dry the tub completely. Moisture can promote mold growth, so use a towel or squeegee to remove excess water. Leave the bathroom door open or run a fan to improve air circulation and speed up drying time.
-
Use a mold inhibitor: To further prevent mold growth, consider using a mold inhibitor spray once a week. Simply spray it on the tub surface, focusing on areas prone to mold and mildew. This will create a protective barrier and help keep your tub cleaner for longer.
With these simple steps, you can easily maintain a clean and mold-free bathtub.
Natural Cleaning Solutions
When it comes to natural cleaning solutions, two popular options are vinegar and baking soda.
Vinegar is known for its acidic properties that can effectively remove stains and kill germs, while baking soda is a versatile ingredient that can be used for scrubbing and deodorizing.
Another natural disinfectant to consider is lemon, which contains citric acid that can help kill bacteria and freshen up surfaces.
In this discussion, I will compare the effectiveness of vinegar and baking soda, as well as explore the benefits of using lemon as a disinfectant.
Vinegar Vs. Baking Soda
The bathtub can stay clean by using vinegar or baking soda. Both of these natural ingredients have incredible cleaning properties that can effectively remove dirt and grime from your bathtub. Here are three reasons why you should consider using vinegar and baking soda for cleaning your bathtub:
-
Vinegar benefits: Vinegar is a powerful natural cleaner that can break down soap scum and mineral deposits. Its acidic nature helps dissolve tough stains and sanitize surfaces, leaving your bathtub sparkling clean.
-
Baking soda uses: Baking soda is a mild abrasive that can scrub away stubborn stains without scratching the bathtub’s surface. It also has deodorizing properties that can eliminate unpleasant odors, leaving your bathtub smelling fresh.
-
Versatility: Both vinegar and baking soda can be used alone or together to tackle a wide range of cleaning tasks in your bathroom. From removing mold and mildew to unclogging drains, these natural ingredients are versatile and cost-effective solutions for maintaining a clean bathtub.
Lemon as Disinfectant
If you want a natural and effective disinfectant option, try using lemon juice.
Lemon juice has numerous benefits and can be a great cleaning agent.
Its high acidity helps to kill bacteria and remove stains, making it perfect for cleaning and disinfecting surfaces in your home, including your bathtub.
Lemon juice also has a fresh scent that leaves your bathroom smelling clean and refreshed.
To use lemon juice as a cleaning agent, simply squeeze some juice onto a sponge or cloth and scrub the surfaces you want to clean.
Rinse thoroughly with water afterwards.
Lemon juice is not only a powerful disinfectant but also an eco-friendly and affordable option.
It’s a great alternative to chemical-based cleaners.
Speaking of cleaning, let’s move on to preventing soap scum buildup.
Preventing Soap Scum Buildup
When it comes to preventing soap scum buildup in the bathroom, there are a few key points to keep in mind.
First, using a vinegar solution can be a great way to cut through the grime and keep surfaces clean.
Second, regularly wiping down surfaces can help to prevent soap scum from building up in the first place.
And finally, opting for gentle cleaners can help to avoid harsh chemicals that can contribute to soap scum buildup.
Use Vinegar Solution
To keep your bathtub clean, you’ll want to use a vinegar solution. Vinegar is a versatile and effective cleaning agent that can help with deep cleaning and removing stubborn stains.
Here are three ways you can use vinegar to keep your bathtub sparkling clean:
-
Mix equal parts vinegar and water in a spray bottle. Spray the solution onto the tub surface and let it sit for a few minutes. Then, scrub with a brush or sponge and rinse thoroughly.
-
For tough stains, create a paste by mixing vinegar and baking soda. Apply the paste onto the stained area and let it sit for about 15 minutes. Scrub with a brush and rinse well.
-
To prevent future stains and buildup, regularly fill your bathtub with hot water and add a cup of vinegar. Let it sit for an hour, then drain and rinse. This will help to keep your bathtub clean and prevent soap scum and mineral deposits.
Regularly Wipe Surfaces
Regularly wiping down the surfaces in your bathroom helps prevent the buildup of grime and keeps everything looking fresh. It is important to maintain a clean bathroom, not just for aesthetic reasons, but also for hygiene. Natural cleaning methods can be used to effectively clean your bathroom without the use of harsh chemicals. One such method is using a vinegar solution, which can help remove stubborn stains and disinfect surfaces. To make the solution, mix equal parts vinegar and water in a spray bottle. Spray the solution onto the surfaces and wipe them down with a microfiber cloth or sponge. Vinegar is a natural disinfectant and can help remove soap scum, mildew, and other stains. Regularly wiping surfaces with a vinegar solution will keep your bathroom clean and fresh.
Natural Cleaning Methods | Removing Stubborn Stains |
---|---|
Vinegar solution | Baking soda paste |
Lemon juice | Hydrogen peroxide |
Essential oils | Salt scrub |
Castile soap | Steam cleaning |
White vinegar |
Opt for Gentle Cleaners
You can choose gentle cleaners that are safe for both you and the environment. Here are three reasons why opting for gentle cleaning methods and non-toxic solutions is a smart choice:
-
Protects Your Health: Traditional cleaning products often contain harsh chemicals that can irritate your skin, eyes, and respiratory system. By choosing gentle cleaners, you can avoid these health risks and create a safer environment for yourself and your family.
-
Eco-Friendly: Gentle cleaners are typically made from natural ingredients that are biodegradable and don’t harm the planet. By using non-toxic solutions, you can reduce your carbon footprint and contribute to a cleaner, greener Earth.
-
Effective Cleaning: Contrary to popular belief, gentle cleaners can still effectively remove dirt, grime, and stains. Many eco-friendly options are specially formulated to tackle tough messes without compromising their gentle nature.
Tackling Hard Water Stains
If you’re struggling with hard water stains in your bathtub, try using vinegar to remove them. Vinegar is a natural and effective cleaner that can help break down and dissolve mineral deposits left by hard water. To use vinegar, simply mix equal parts vinegar and water in a spray bottle and spray it onto the affected areas. Let it sit for a few minutes, then scrub with a soft brush or sponge. Rinse thoroughly with water. If the stains are stubborn, you can also try soaking a cloth in vinegar and placing it on the stains for a few hours before scrubbing. Here is a helpful table outlining different cleaning techniques for removing mineral deposits:
Cleaning Technique | Steps |
---|---|
Vinegar | Mix equal parts vinegar and water, spray onto stains, scrub, rinse |
Baking Soda | Mix baking soda with water to form a paste, apply to stains, scrub, rinse |
Lemon Juice | Squeeze lemon juice onto stains, scrub, rinse |
Borax | Mix borax with water to form a paste, apply to stains, scrub, rinse |
Commercial Cleaners | Follow product instructions, scrub, rinse |
Maintaining a Sparkling Finish
After successfully tackling hard water stains, it’s important to focus on maintaining a sparkling finish in your bathtub. Here are a few tips to keep your bathtub hardware clean and prevent mold growth:
-
Regular cleaning: Wipe down the bathtub hardware with a mild cleanser and a soft cloth on a weekly basis. This will help remove any soap scum or dirt buildup that can tarnish the finish.
-
Proper ventilation: Make sure your bathroom is well-ventilated to prevent excess moisture from lingering in the air. Use a bathroom fan or open a window during and after showers to allow proper airflow.
-
Dry thoroughly: After each use, dry the bathtub hardware with a towel to remove any remaining moisture. This will help prevent mold and mildew from forming.
Conclusion
In conclusion, keeping your bathtub clean is crucial for a sparkling sanctuary. By using effective cleaning products and establishing a regular routine, you can effortlessly maintain a pristine tub.
Don’t underestimate the power of natural cleaning solutions to tackle dirt and grime. Prevent soap scum buildup by wiping down after each use and address hard water stains promptly.
With dedication and diligence, you’ll enjoy a consistently clean and inviting bathtub that’ll make you feel like royalty. So, start scrubbing and savor the satisfaction of a spotless soak!
With an impeccable eye for detail and a passion for bathroom-related, Ava leads our editorial team gracefully and precisely.
Under her guidance, Best Modern Toilet has flourished as the go-to resource for modern bathroom enthusiasts. In her free time, you might find Ava exploring antique shops and looking for vintage bathroom fixtures to add to her collection.
Bathtub
How to Bathe a Child With No Bathtub
Have you ever found yourself in a situation where you need to bathe a child but don’t have a bathtub? Don’t worry, I’ve got you covered!
In this article, I will guide you through alternative bathing options and provide you with helpful techniques and safety tips. Bathing a child without a bathtub may seem challenging, but with a little creativity and preparation, you can ensure a gentle and enjoyable bathing experience for your little one.
So let’s dive in and discover how to make bath time fun and safe, even without a bathtub!
Key Takeaways
- Alternative bathing options include using a large basin or baby bathtub, showering with your child, sink bathing, or exploring other options like inflatable pools or outdoor water play areas.
- When preparing the bathing area, find a large basin or sink, create a makeshift bathtub using a plastic tub or clean laundry basket, ensure stability and security, and check and maintain a comfortable water temperature.
- Gather all necessary bathing supplies in one place, including a soft washcloth, gentle baby soap, towel, clean diaper, and clothes. Consider having toys to keep your child entertained.
- Use bathing accessories like a baby bathtub, washcloths, and gentle baby soap. Try different bathing positions, encourage play and interaction with water, and maintain a supportive and comforting environment.
Alternative Bathing Options
If you don’t have a bathtub, you can try using a large basin or a baby bathtub as an alternative. There are other options for bathing your child without a bathtub as well.
One option is showering. You can bring your child into the shower with you, making sure to use a non-slip mat and keep the water at a safe temperature. This can be a fun and interactive way to clean your child.
Another option is sink bathing. If your child is small enough, you can use the sink as a makeshift bathtub. Just make sure to clean the sink thoroughly before and after use. Sink bathing can be a convenient and comfortable option for both you and your child.
Preparing the Bathing Area
To prepare the bathing area, make sure you have a large basin or sink available. Creating a makeshift bathtub can be fun and easy! Find a plastic tub or even a clean laundry basket that your child can comfortably sit in. Place it in the basin or sink, making sure it is stable and secure.
Now, let’s talk about water temperature control. It’s important to always check the water temperature before bathing your child. Use your elbow or a thermometer to ensure that the water is warm, not too hot or cold. Remember, your child’s skin is delicate, so maintaining a comfortable water temperature is key.
With a makeshift bathtub and proper water temperature control, you can create a safe and enjoyable bathing experience for your little one.
Gathering Bathing Supplies
When gathering bathing supplies, make sure you have everything you need in one place. If you’re bathing your child in the sink or using a portable bathtub, it’s important to be prepared. Gather a soft washcloth, gentle baby soap, and a towel. Don’t forget to have a clean diaper and clothes ready for after the bath. You may also want to have some toys to keep your child entertained during bath time.
Keep in mind that safety is key, so make sure the sink or portable bathtub is secure and stable. Now that you have all your supplies ready, let’s move on to the next section and learn some bathing techniques for a child.
Bathing Techniques for a Child
Now that you have gathered all the necessary supplies, let’s explore some effective techniques for giving your child a bath.
Bathing accessories such as a baby bathtub, washcloths, and gentle baby soap are essential for a comfortable and enjoyable bath time experience.
To make bathing easier, try using different bathing positions. For infants, the tummy-to-tummy position with one hand supporting their head is a great option. As your child grows, the sitting position with their back against your chest can be more suitable. This allows you to support them while they play in the water.
Transitioning into the subsequent section about safety tips for bathing without a bathtub, it’s important to ensure that the bathing area is safe and secure to prevent any accidents.
Safety Tips for Bathing Without a Bathtub
Using a non-slip mat or cushioned surface on the bathroom floor can help ensure a safe bathing experience for your little one. Here are some tips to make bath time fun and safe without a bathtub:
-
Use a baby bathtub: Opt for a portable, collapsible baby bathtub that can be placed on a stable surface, like a countertop or table. This provides a secure and comfortable space for your child during bath time.
-
Get child-friendly products: Look for child-friendly bathing essentials, such as tear-free shampoo, gentle body wash, and soft washcloths. These products are formulated to be gentle on your child’s delicate skin.
-
Keep the water temperature in check: Always check the water temperature before placing your child in the bath. Use a baby bath thermometer to ensure the water is at a safe and comfortable temperature.
Conclusion
So there you have it, a guide on how to bathe a child without a bathtub. I hope these alternative bathing options and techniques have been helpful to you.
Remember, bath time can be a fun and soothing experience for your child, no matter the circumstances.
Did you know that according to a recent survey, 34% of parents in urban areas do not have access to a bathtub? It just goes to show that many families are facing similar challenges when it comes to bathing their little ones.
Rest assured, with a little creativity and preparation, you can still provide a safe and enjoyable bathing experience for your child, even without a bathtub.
Mateo’s flair for writing is matched only by his keen eye for design. As an interior designer turned writer, Mateo brings a unique perspective. He blends aesthetics with functionality in every piece he pens, providing readers with beautifully crafted content that’s also supremely useful.
Mateo loves exploring the latest bathroom tech trends and is our expert on smart toilets. When he’s not writing or designing, Mateo can be found sketching ideas for his next big project at local coffee shops.
Bathtub
How to Use Bathtub Finger Paint Soap
I’ve discovered the most delightful way to transform bath time into a vibrant masterpiece – bathtub finger paint soap!
Get ready to unleash your inner artist as I guide you through the steps of using this colorful creation.
From safety precautions to choosing the perfect finger paint soap, preparing the bathtub and supplies, and finally, getting your hands dirty with the finger paint soap, I’ll show you how to create a sensory masterpiece that will make bath time an imaginative adventure.
Let’s dive in!
Key Takeaways
- Use safety precautions such as gloves and protective goggles when using finger paint soap.
- Consider texture and ingredients when choosing finger paint soap.
- Set up a designated space in the bathtub for finger painting.
- Finger painting with soap promotes creativity, sensory exploration, and fine motor skills development.
Safety Precautions
To ensure your safety while using bathtub finger paint soap, make sure to follow these precautions.
First and foremost, it is essential to protect your hands by using gloves. This will not only prevent any potential skin irritation but also keep your hands clean throughout the painting session.
Additionally, it is crucial to safeguard your eyes from any accidental splashes or contact with the soap. Wearing protective goggles or glasses can greatly reduce the risk of any eye-related injuries.
By taking these simple steps, you can enjoy a worry-free and safe experience while using bathtub finger paint soap.
Now that we have covered the safety precautions, let’s move on to the next section about choosing the right finger paint soap.
Choosing the Right Finger Paint Soap
When selecting the appropriate soap for finger painting in the bathtub, it’s important to consider the texture and ingredients.
Finger paint soap is not only a fun and creative way for children to explore their artistic side, but it also offers several benefits for sensory play. The smooth and creamy texture of the soap allows for easy application on the skin, stimulating the senses and promoting tactile development.
Additionally, finger paint soap is often made with gentle and non-toxic ingredients, ensuring a safe and enjoyable experience for young ones.
To incorporate finger paint soap into your bath time routine, consider setting aside a designated space for painting in the bathtub and providing various tools like brushes or sponges. Encourage your child to experiment with colors and patterns, fostering their imagination and creativity.
Remember to supervise the activity and have fun together!
Preparing the Bathtub and Supplies
Make sure you have all the necessary supplies ready, such as brushes, sponges, and a designated area for your child to paint in.
Before starting the fun and messy activity of bathtub decorations with finger paint soap, it’s important to prepare the bathtub and gather all the materials you’ll need.
Begin by cleaning the bathtub thoroughly to ensure a clean canvas for your child’s artwork.
Next, gather a variety of brushes and sponges to offer different textures and creative possibilities.
Set up a designated area in the bathroom where your child can freely express their creativity without worrying about making a mess.
Once everything is set up, you can move on to using the finger paint soap to bring your child’s imagination to life.
Using the Finger Paint Soap
Once you’ve got all the supplies ready, it’s time to get creative with the finger paint soap. Finger painting is a wonderful sensory play activity that allows children to explore their creativity while engaging their senses. There are various finger painting techniques you can try with the soap, such as dotting, smearing, or even finger printing. The smooth texture of the soap enhances the sensory experience and stimulates the sense of touch. It’s a great way for children to express themselves and develop their fine motor skills.
To help you get started, here is a simple table that showcases the benefits of sensory play and how finger painting with soap can contribute to a child’s development:
Benefits of Sensory Play | Benefits of Finger Paint Soap |
---|---|
Stimulates the senses | Enhances creativity |
Develops fine motor skills | Improves hand-eye coordination |
Encourages self-expression | Promotes sensory exploration |
Now that you know the benefits and techniques, let’s dive into the fun and messy world of finger painting with the soap. But don’t worry, cleaning up and storing the finger paint soap is just as easy as the painting process.
Cleaning up and Storing the Finger Paint Soap
To clean up and store the finger paint soap, all you need to do is rinse off the excess paint from your hands and then place the soap in a dry and secure location.
Here are some cleaning techniques and alternative storage methods to ensure the longevity of your finger paint soap:
-
Cleaning technique: Use warm water and mild soap to gently wash off any remaining paint from your hands. Rub your hands together to create a lather and rinse thoroughly.
-
Alternative storage method 1: Keep the finger paint soap in a ziplock bag or airtight container to prevent it from drying out. This will help maintain its texture and prevent it from becoming hard.
-
Alternative storage method 2: If you have leftover paint soap, you can mold it into small shapes or place it in silicone molds. Once it dries, you can store these shapes in a jar or container for future use.
-
Alternative storage method 3: If you want to reuse the finger paint soap later, wrap it tightly in plastic wrap to prevent it from drying out. Place it in a cool and dry place, away from direct sunlight.
Conclusion
In conclusion, using bathtub finger paint soap can be a fun and creative activity for both children and adults. By following the safety precautions and choosing the right finger paint soap, you can ensure a safe and enjoyable experience.
Preparing the bathtub and supplies beforehand will help make the process smoother. Once you start using the finger paint soap, let your imagination run wild and create beautiful masterpieces.
Finally, don’t forget to clean up properly and store the finger paint soap for future use. So go ahead, dive into the world of finger paint soap and let your creativity shine!
With an impeccable eye for detail and a passion for bathroom-related, Ava leads our editorial team gracefully and precisely.
Under her guidance, Best Modern Toilet has flourished as the go-to resource for modern bathroom enthusiasts. In her free time, you might find Ava exploring antique shops and looking for vintage bathroom fixtures to add to her collection.
Bathtub
When Can Baby Sit in Big Bathtub
As a parent, I remember the joy and excitement of watching my little one reach new milestones. One of those moments was when I realized it was time for my baby to sit in the big bathtub. It’s a special transition that signals their growth and independence.
In this article, we’ll explore the age milestones, signs of readiness, and safety tips for bathing your baby in a big bathtub. So, let’s dive in and make bath time a delightful experience for both you and your little one!
Key Takeaways
- Baby should be able to sit up on their own before using a big bathtub
- It is important to prioritize bathtub safety by using a non-slip mat and keeping close supervision
- Preparing and ensuring safety in the big bathtub includes checking for cleanliness, using gentle baby bath products, and creating a calming atmosphere
- Transitioning from a baby bathtub to a big bathtub can be made enjoyable with the introduction of bath toys and making the experience exciting for the baby
Age Milestones for Bathing in a Big Bathtub
You can start bathing your baby in a big bathtub once they are able to sit up on their own. It’s important to wait for this milestone because sitting up ensures that your baby has the necessary strength and balance to stay safe in the tub.
As a parent, you want to prioritize bathtub safety at all times. It’s recommended to use a non-slip mat in the tub and always keep a close eye on your baby. Make sure the water temperature is warm, but not too hot, and never leave your baby unattended.
Once your little one can sit independently, they will be ready to explore the big bathtub and enjoy a more interactive and fun bathing experience.
Now, let’s talk about the signs of readiness for bathing in a big bathtub.
Signs of Readiness for Bathing in a Big Bathtub
When it’s time for a little one to transition to a larger tub, look out for signs of readiness such as increased independence and ability to follow directions. It’s important to ensure bathroom safety during this transition, so make sure to have a non-slip bath mat in the big bathtub and keep bathroom toys within reach but out of the way. Here’s a helpful table to highlight some key bathroom safety tips:
Bathroom Safety Tips |
---|
Always supervise your child during bath time |
Keep the temperature of the water comfortable and safe |
Ensure the bathtub is clean and free from any hazards |
Use a non-slip bath mat or stickers to prevent slips and falls |
Keep bathroom toys organized and away from the drain |
Preparing the Big Bathtub for Baby’s Bath Time
To prepare the larger tub for bath time, make sure to check that it is clean and free from any hazards. Here are some things you can do to create a fun bath time environment for your baby:
-
Gather the right baby bath products: Make sure you have gentle baby soap, a soft washcloth, and a baby shampoo that won’t irritate your little one’s eyes.
-
Set the mood: Dim the lights in the bathroom or use a nightlight to create a calming atmosphere. You can also play some soft music to help your baby relax.
-
Have some bath toys: Rubber ducks, floating boats, and colorful cups can make bath time more enjoyable for your baby. They can play with these toys and have fun while getting clean.
Safety Tips for Baby’s First Big Bathtub Bath
Make sure the larger tub is clean and free from hazards before giving your baby their first bath.
While some parents prefer to use a baby bathtub, there are also alternatives available for bathing your little one in the big tub.
One option is using a bath seat or ring that provides support and prevents your baby from slipping. These accessories are designed to fit securely in the bathtub and offer a safe and comfortable bathing experience.
Another alternative is using a non-slip mat or bath cushion to provide extra grip and cushioning. These accessories can be placed in the tub to create a safer bathing environment for your baby.
Transitioning From a Baby Bathtub to a Big Bathtub
Using a bath seat or ring can provide support and prevent slipping when transitioning to the larger tub. Here are some things to consider when making the switch:
-
Bathtub size considerations: Make sure the big bathtub is suitable for your baby’s size. It should be deep enough to cover their legs comfortably and wide enough for them to sit without feeling cramped.
-
Introducing bath toys: Bath time is not just about getting clean, it’s also a fun and sensory experience for your little one. Start by adding a few bath toys to the big bathtub to make it more exciting. Squirt toys, rubber ducks, and floating animals are great options that can keep your baby entertained while you wash them.
Conclusion
As I watch my little one splash and play in the big bathtub, I can’t help but marvel at how quickly they’ve grown.
It feels like just yesterday they were nestled in the safety of their baby bathtub. But now, they’re ready for this new adventure, exploring the vastness of the big bathtub.
With each splash and giggle, I see their confidence and independence blossom. It’s a joy to witness their growth, and I’m grateful for these precious moments together.
Liam’s journey with us started as a consumer. Having faced challenges while setting up his own modern bathroom, he delved deep into research.
Recognizing his knack for simplifying complex information and his authentic writing style, we were thrilled to welcome him aboard. Liam’s articles often merge practicality with style, ensuring readers find the perfect fit for their homes. Liam is an avid hiker off-duty and often jokes about finding the best “natural toilets” Mother Earth has to offer.
-
FAQ - Advanced Bathroom Queries1 month ago
How to Replace Old Style Toilet Flapper
-
Buying Guides1 month ago
A Comprehensive Guide to 11-Inch Rough-In Toilets
-
Bathtub1 month ago
How to Fix Bathtub Faucet
-
FAQ - Advanced Bathroom Queries1 month ago
How Does a Bidet Toilet Seat Work
-
FAQ - Advanced Bathroom Queries1 month ago
How to Drain Toilet Bowl
-
FAQ - Advanced Bathroom Queries2 days ago
Why Does My Poop Fall Apart in the Toilet
-
Guides1 month ago
How to Attach a Toilet Seat
-
Reviews2 weeks ago
Westbrass A503-07 Remodel Plate Review