Skip to content

How to Remove Toilet From Floor

  • by
An image featuring a step-by-step guide for removing a toilet from the floor

So you’ve found yourself in a situation where you need to bid farewell to your trusty commode. Fear not, for I am here to guide you through the process of removing a toilet from the floor.

With just a few tools and a bit of elbow grease, you’ll have that porcelain throne detached and ready for its next adventure in no time.

Let’s dive in and get this… ahem… ‘throne relocation’ underway.

Key Takeaways

  • Gather all necessary tools and materials before starting the process, including gloves, wrench, bucket, sponge, drop cloth or towels, and putty knife.
  • Prepare the bathroom by clearing the area around the toilet, removing rugs and towels, and covering the floor with plastic sheets. Ensure proper ventilation to eliminate odors and fumes.
  • Start the removal process by turning off the water supply and disconnecting the toilet tank from the bowl. Flush the toilet to empty the tank and disconnect the water supply line.
  • Detach the toilet bowl from the floor by locating and removing the bolts at the base of the bowl, lifting it straight up, and checking for any remaining bolts or screws.

Tools and Materials Needed

To remove the toilet from the floor, you’ll need a few tools and materials.

First, gather a pair of gloves to protect your hands and a wrench to disconnect the water supply line.

Next, have a bucket and sponge ready to catch any excess water that may spill during the process.

It’s important to protect the floor from any potential damage, so consider using a drop cloth or old towels to create a barrier.

Additionally, grab a putty knife to help loosen the seal between the toilet and the floor.

Lastly, have some rags or paper towels handy for cleaning and drying the area once the toilet is removed.

With these tools and materials, you’ll be prepared for a successful toilet removal while keeping the floor protected.

Preparing the Bathroom

Before you start, make sure you’ve gathered all the necessary tools and materials for preparing the bathroom.

Creating a temporary bathroom setup is crucial to ensure convenience during the toilet removal process.

First, clear the area around the toilet by removing any rugs, towels, or other items that may obstruct your work.

Next, cover the floor with plastic sheets to protect it from any potential damage or spills.

Additionally, ensure proper ventilation by opening windows or using fans to eliminate any odors or fumes that may arise during the process.

Proper ventilation not only improves air quality but also helps dissipate any potential harmful gases or chemicals.

Removing the Toilet Tank

Make sure you’ve turned off the water supply and disconnected the tank from the bowl before proceeding with the removal process.

Toilet tank maintenance is an important aspect of keeping your bathroom in good working order. If you find yourself needing to upgrade toilet tank components, such as the fill valve or flush valve, it’s necessary to remove the tank first.

To do this, start by shutting off the water supply valve located behind the toilet. Next, flush the toilet to empty the tank. Disconnect the water supply line from the bottom of the tank. Use an adjustable wrench to loosen and remove the nuts securing the tank to the bowl.

Carefully lift the tank off the bowl, ensuring not to damage any surrounding parts. With these steps, you can safely remove the toilet tank for maintenance or upgrading purposes.

Detaching the Toilet Bowl From the Floor

Once you’ve disconnected the tank, you can detach the toilet bowl from the floor by removing the bolts securing it in place.

To begin, locate the bolts at the base of the toilet bowl. These bolts are typically covered by plastic caps that can be easily popped off with a flathead screwdriver.

Once the caps are removed, use a wrench or pliers to loosen and remove the nuts that secure the bolts.

With the bolts and nuts removed, carefully lift the toilet bowl straight up to detach it from the floor. Remember to be cautious as the bowl may still contain residual water.

If you encounter any resistance, check for any remaining bolts or screws that may need to be removed.

Troubleshooting common issues during this process includes ensuring the wax seal has been properly replaced and inspecting for any damage or cracks in the toilet bowl or flange.

Cleaning and Disposing of the Toilet

To properly clean and dispose of the toilet, you should start by emptying the contents of the bowl into a trash bag. This ensures that you can properly clean the toilet without any obstructions.

After emptying the bowl, follow these cleaning techniques and safe disposal methods:

  • Use a toilet brush and a cleaning solution specifically designed for toilets to scrub the inside of the bowl thoroughly.
  • Wipe down the exterior of the toilet, including the tank and seat, with a disinfectant cleaner.
  • Rinse the brush and cleaning cloth with water to remove any residue.
  • Dispose of the toilet waste in a plastic bag and tie it securely.
  • Take the bag to your local waste disposal facility or follow your municipality’s guidelines for disposal.

Frequently Asked Questions

How Do I Know if It’s Necessary to Remove the Toilet From the Floor?

To determine if it’s necessary to remove the toilet from the floor, I would check for water damage and signs of a leak. These indicators can help identify any underlying issues that may require toilet removal.

Is It Necessary to Shut off the Water Supply Before Removing the Toilet?

Yes, it is necessary to shut off the water supply before removing the toilet. Removing the toilet without shutting off the water supply could cause water leakage. It is recommended to get professional help to remove the toilet safely.

Can I Reuse the Wax Ring When Reinstalling the Toilet?

Yes, you can reuse the wax ring when reinstalling the toilet if it’s still in good condition. However, if it’s damaged or old, it’s best to use a new wax ring or consider alternative options like wax-free seals.

Are There Any Safety Precautions I Should Take While Removing the Toilet?

When removing a toilet, it’s important to prioritize safety. To protect yourself, wear safety equipment like gloves and goggles. Additionally, use proper lifting techniques to avoid strain or injury.

How Long Does the Entire Process of Removing the Toilet Usually Take?

Removing a toilet usually takes around 1-2 hours. To prepare the area, turn off the water supply, drain the tank, and disconnect the water line. Common mistakes to avoid include not wearing gloves and not properly supporting the toilet during removal.


In conclusion, removing a toilet from the floor may seem daunting, but it can be done efficiently with the right tools and steps.

By following the outlined procedure and taking necessary precautions, anyone can successfully remove a toilet.

For example, John, a homeowner, successfully removed his old toilet using the steps provided. He was able to clean and dispose of the toilet properly, making way for a new and improved bathroom fixture.

Remember, always prioritize safety and consult a professional if needed.