Skip to content

How to Take Out Bathtub Drain

  • by
An image showcasing a pair of gloved hands holding a wrench, positioned above a dismantled bathtub drain

As I plunged into the murky waters of my clogged bathtub, I realized it was time to tackle the pesky drain.

In this informative guide, I’ll show you step-by-step how to take out a bathtub drain, ensuring a smooth and functional plumbing system.

With just a few tools and some elbow grease, you’ll be able to remove the stopper, detach the drain cover, and clean the entire area for a sparkling finish.

Say goodbye to blockages and hello to a stress-free bathing experience!

Key Takeaways

  • Unscrew the bathtub stopper from the drain using pliers or a stopper removal tool.
  • Use a screwdriver to detach the screws holding the drain cover in place, then carefully lift it off the bathtub.
  • Remove the drain flange by unscrewing it from the bathtub using pliers or a screwdriver.
  • Clean the drain area by removing debris, using a drain snake or tweezers, and using a mixture of baking soda and vinegar to break down residue. Regular maintenance is key to prevent common problems.

An image showcasing a pair of pliers, a screwdriver, a drain wrench, a bucket, and a flashlight neatly arranged on a bathroom countertop

Tools and Materials Needed

To take out the bathtub drain, you’ll need a pair of pliers and a screwdriver.

Start by locating the drain cover in the bathtub. Most drain covers have a small hole in the center. Insert the tip of the screwdriver into the hole and turn it counterclockwise to loosen the cover.

Once the cover is removed, you’ll see the drain assembly. Use the pliers to grip and turn the drain counterclockwise. Apply steady pressure and turn until the drain is completely unscrewed from the bathtub. Be careful not to damage the surrounding area.

Once the drain is removed, you can proceed with drain replacement or any necessary repairs. Remember to consult a professional if you are unsure about any steps in the process.

An image that showcases a close-up view of a hand holding a pair of pliers, gently grasping the bathtub stopper

Removing the Bathtub Stopper

Start by unscrewing the stopper from the bathtub. This is a common step in replacing the bathtub stopper and can help address common bathtub drain problems.

Sometimes, the stopper may become clogged with hair or debris, causing water to drain slowly or not at all. By removing the stopper, you can easily clean it or replace it with a new one.

To unscrew the stopper, you will need a pair of pliers or a stopper removal tool. Insert the tool into the drain and turn counterclockwise to loosen and remove the stopper.

Once the stopper is removed, you can inspect it for any damage or blockage.

This process will prepare you for the next step: detaching the drain cover.

An image depicting a hand holding a screwdriver, positioned above a bathtub drain

Detaching the Drain Cover

Using a screwdriver, carefully remove the screws holding the drain cover in place. These screws are usually located around the edges of the cover.

Once the screws are removed, gently lift the drain cover off the bathtub. It’s important to be cautious while doing this to avoid any damage to the cover or the bathtub surface.

Now that the drain cover is detached, you can proceed with replacing it. Replacing the drain cover is essential to prevent drain clogs. A damaged or worn-out cover can allow debris and hair to accumulate in the drain, leading to clogs and potentially costly plumbing issues.

An image showcasing a pair of pliers gripping the drain flange tightly, while a wrench is seen behind, positioned to loosen it counterclockwise

Loosening and Removing the Drain Flange

Carefully unscrew and remove the drain flange from the bathtub. The drain flange is the part that connects the drain cover to the pipe beneath.

To start, locate the screws on the flange and use a screwdriver to loosen them. Once the screws are loose, grip the flange with a pair of pliers and twist it counterclockwise to remove it from the drain. Be cautious not to apply too much force, as this could damage the surrounding plumbing.

Removing the drain flange is an essential step when replacing the drain cover or fixing a clogged drain. By removing the flange, you gain access to the drain pipe, allowing you to clean or replace any obstructions that may be causing the clog.

An image capturing a gloved hand removing a bathtub drain cover, revealing a clogged drain area

Cleaning and Inspecting the Drain Area

Inspect the area around the drain for any debris or buildup that may be causing the clog. It’s essential to regularly maintain your drain to prevent common drain problems.

Start by removing any visible hair or gunk using a pair of tweezers or a drain snake. Be thorough and remove as much debris as possible.

Next, pour a mixture of baking soda and vinegar down the drain. This will help break down any remaining residue and eliminate foul odors. Let it sit for a few minutes before flushing with hot water.

Frequently Asked Questions

How Do I Know if My Bathtub Drain Needs to Be Replaced?

If you’re wondering if your bathtub drain needs to be replaced, look out for signs like slow drainage, unpleasant odors, or water leaks. A professional plumber can help determine the best course of action.

Can I Use Household Items Instead of Specialized Tools to Remove the Drain?

Yes, you can use household items instead of specialized tools to remove the drain. Let me guide you through the process step by step. It’s surprisingly simple and doesn’t require any expensive equipment.

Is It Necessary to Shut off the Water Supply Before Removing the Drain?

Yes, it is necessary to shut off the water supply before removing the drain. This prevents any water from flowing into the bathtub while you work. It’s a simple precaution to take.

What Should I Do if the Drain Flange Is Stuck and Won’t Come Off?

If the drain flange is stuck and won’t come off, try using chemical solutions specifically designed to loosen stubborn parts. If that doesn’t work, it might be best to seek professional help.

Are There Any Safety Precautions I Should Take While Removing the Bathtub Drain?

When removing a bathtub drain, it’s important to take safety precautions. Wear protective gloves and eye goggles to avoid injury. Use the proper tools and follow the manufacturer’s instructions to ensure a safe removal process.


Taking out a bathtub drain may not be the most glamorous task, but it can be a satisfying DIY project. With just a few tools and some patience, you can remove the drain and give your bathtub a much-needed makeover.

By following the steps outlined in this article, you’ll be able to easily detach the drain cover, loosen and remove the drain flange, and clean and inspect the drain area.

So go ahead and tackle that bathtub drain, and enjoy the feeling of accomplishment that comes with a job well done!