So you’ve been facing the frustrating issue of toilet clogs, huh? Trust me, I’ve been there too.
But fear not, because I’ve got the solution you’ve been searching for. In this article, I’ll reveal the secrets to keeping your toilet free from those dreaded blockages.
We’ll explore the importance of regular maintenance, natural DIY remedies, effective chemical products, and best practices for flushing.
No more plungers and headaches – it’s time to take control of your toilet and wave goodbye to clogs!
- Regular maintenance and DIY techniques are important to prevent clogs and blockages in toilets.
- Natural DIY solutions such as vinegar and baking soda, hot water and dish soap, and Epsom salt can help keep toilets from clogging.
- Chemical products like toilet bowl cleaners and drain cleaners can be used for prevention, but should be used sparingly and with caution.
- Following best practices for flushing, such as only flushing toilet paper and human waste, can help avoid plumbing problems.
Importance of Regular Maintenance
Regular maintenance is important to prevent clogs in your toilet. By performing regular maintenance on your toilet, you can ensure that it functions properly and avoid any potential clogs or blockages.
The frequency of maintenance will depend on the usage of your toilet. For a household with multiple occupants, it is recommended to perform maintenance at least once every three months. However, if you notice any signs of a potential clog, such as slow draining or water backup, it is important to address it immediately.
There are several DIY maintenance techniques that you can utilize to prevent clogs. These include using a plunger to remove any minor blockages, regularly cleaning the toilet bowl and drain pipes, and avoiding flushing items such as wipes, paper towels, or feminine hygiene products that can cause clogs.
Natural DIY Solutions
Instead of using regular store-bought products, you can try a natural DIY solution to prevent your toilet from clogging. There are several eco-friendly alternatives using common household items that can effectively keep your toilet running smoothly. Here is a table showcasing some of these solutions:
|Natural DIY Solution||Household Item||Usage|
|Vinegar and Baking Soda||Vinegar||Pour 1 cup of vinegar followed by 1 cup of baking soda into the toilet bowl. Let it sit for 10 minutes and then flush.|
|Hot Water and Dish Soap||Dish Soap||Add a few drops of dish soap to a bucket of hot water. Pour the mixture into the toilet and let it sit for 15 minutes before flushing.|
|Epsom Salt||Epsom Salt||Add 1 cup of Epsom salt to the toilet bowl. Let it sit for 30 minutes and then flush.|
|Plunger||Plunger||Use a plunger to dislodge any clogs by creating suction and pressure.|
These natural DIY solutions are not only effective in preventing toilet clogs but also environmentally friendly alternatives to chemical-based products. By using household items, you can keep your toilet clog-free while reducing your carbon footprint.
Chemical Products for Prevention
Using chemical products can be an effective way to prevent clogs in your toilet. Toilet bowl cleaners and drain cleaners are specifically designed to break down and dissolve any build-up or debris that may be causing the clog. These products contain strong chemicals that can effectively remove stubborn stains, kill bacteria, and eliminate foul odors.
When choosing a toilet bowl cleaner or drain cleaner, make sure to read the instructions carefully and choose a product that is compatible with your plumbing system. It is important to use these products sparingly and only when necessary, as excessive use can lead to damage to your pipes or septic system. Additionally, always follow the instructions on the label and take necessary safety precautions, such as wearing gloves and ensuring proper ventilation.
By using these chemical products responsibly, you can help prevent clogs and maintain a clean and functioning toilet.
To ensure the best practices for flushing, it is important to follow a few simple guidelines.
Best Practices for Flushing
To ensure proper flushing, you should remember to only flush toilet paper and human waste down the toilet. This is the best practice for unclogging and avoiding common mistakes that can lead to plumbing problems.
Flushing anything other than toilet paper and waste can result in clogs and blockages in your pipes. Items like hygiene products, paper towels, and even baby wipes should never be flushed as they do not break down like toilet paper does.
Additionally, pouring grease or oil down the toilet can also lead to clogs as it solidifies and sticks to the pipes.
Professional Plumbing Services
Hiring a professional plumber can save you time and ensure that your plumbing issues are properly addressed. Here are four reasons why you should consider hiring a plumber:
Expertise: Plumbers undergo extensive training and have the knowledge and skills necessary to tackle any plumbing problem. They can quickly identify the root cause of the issue and provide effective solutions.
Quality Workmanship: Professional plumbers have access to the latest tools and equipment, allowing them to deliver high-quality work. They can fix your plumbing problems correctly the first time, saving you from future headaches.
Emergency Plumbing Services: Plumbing emergencies can happen at any time, day or night. Hiring a professional plumber means having access to emergency services, ensuring that your plumbing issues are promptly addressed, preventing further damage to your home.
Peace of Mind: By hiring a plumber, you can have peace of mind knowing that your plumbing system is in capable hands. They will handle all the necessary repairs and maintenance, allowing you to focus on other important aspects of your life.
Frequently Asked Questions
How Often Should I Schedule Professional Plumbing Services for My Toilet to Prevent Clogging?
I schedule professional plumbing services for my toilet every year to prevent clogging. It’s important to maintain regular maintenance to avoid issues. Additionally, I use home remedies like baking soda and vinegar to unclog without a plunger.
Are There Any Natural DIY Solutions That Can Help Unclog a Severely Clogged Toilet?
To unclog a severely clogged toilet, there are natural DIY solutions you can try. Some options include using a plunger, a mixture of baking soda and vinegar, or a toilet auger.
Can Using Chemical Products for Prevention Damage the Plumbing System in the Long Run?
Using chemical products to prevent toilet clogs has pros and cons. While they may temporarily unclog the toilet, they can also damage the plumbing system in the long run. Maintaining a healthy plumbing system without chemicals can be achieved through regular maintenance and proper usage.
What Are Some Common Mistakes People Make When Flushing That Can Lead to Toilet Clogs?
When it comes to flushing, there are some common mistakes we make that can lead to nasty toilet clogs. But fear not! I’ll share tips on how to prevent them and keep your toilet flowing smoothly.
Is It Necessary to Hire a Professional Plumber if I Am Experiencing Frequent Toilet Clogs?
Hiring a professional plumber may not always be necessary for frequent toilet clogs. First, try using a plunger to clear the blockage. If that doesn’t work, troubleshoot and fix minor clogs at home with a toilet auger or a drain snake.
In conclusion, regular maintenance and proactive measures are key to preventing toilet clogs. By using natural DIY solutions such as a mixture of baking soda and vinegar or opting for chemical products specifically designed for prevention, you can ensure the smooth functioning of your toilet.
Remember to follow best practices for flushing, avoiding excessive toilet paper or foreign objects. If all else fails, don’t hesitate to seek professional plumbing services.
For instance, my neighbor, Sarah, had been experiencing frequent toilet clogs until she started using a natural enzyme-based cleaner, which significantly reduced the occurrence of clogs.
Mateo’s flair for writing is matched only by his keen eye for design. As an interior designer turned writer, Mateo brings a unique perspective. He blends aesthetics with functionality in every piece he pens, providing readers with beautifully crafted content that’s also supremely useful.
Mateo loves exploring the latest bathroom tech trends and is our expert on smart toilets. When he’s not writing or designing, Mateo can be found sketching ideas for his next big project at local coffee shops.
Can I Run Water When the Power Is Out?
We know what you’re thinking: ‘Can I run water when the power is out?’ Well, the answer isn’t a simple yes or no. There are several factors to consider, such as the type of water system you have and the availability of backup options.
In this article, we’ll delve into the details and provide you with a comprehensive guide on how to ensure your water needs are met during power outages.
So, let’s get started and master the art of water management in challenging times.
- Municipal water systems rely on electric pumps, so there may be a disruption in water supply during power outages.
- Private well systems can be used as an alternative, but they require proper maintenance and troubleshooting during a power outage.
- Backup options for water during power outages include rainwater collection systems and portable water containers.
- It is important to prepare for water needs during power outages by storing an adequate amount of emergency water and being aware of water purification methods.
Factors Affecting Water Availability
One factor that affects water availability when the power is out is our reliance on electric pumps to distribute water throughout the system. Water scarcity becomes a major concern in such situations, and it’s crucial to understand the importance of water conservation.
Electric pumps play a critical role in supplying water to our homes, businesses, and communities. Without power, these pumps can’t function, leading to a disruption in water distribution. To address this issue, it’s essential to have alternative power sources or backup systems in place.
This could include generators or solar-powered pumps that can continue to operate during power outages. By implementing such solutions, we can ensure a more reliable water supply and mitigate the impact of water scarcity during emergencies.
Municipal Water Systems and Power Outages
When the power is out, we rely on municipal water systems to provide us with water, but unfortunately, they aren’t always able to function properly. During a power outage, the municipal water supply may be affected for several reasons:
- Pumping stations: Municipal water systems rely on electric pumps to distribute water. When the power goes out, these pumps stop working, causing a disruption in the water supply.
- Treatment plants: Without electricity, water treatment plants may not have the necessary power to operate the treatment processes effectively. This can lead to a decrease in the quality of the water being supplied.
To prepare for such situations, it’s advisable to have a backup plan in place. One option is to store an adequate amount of water in advance to meet your needs during a power outage. This can help ensure that you have access to clean water even when the municipal water system isn’t functioning properly.
Private Well Systems and Power Outages
During a power outage, our reliance on municipal water systems may be compromised, but another option to consider is utilizing private well systems. Private well systems can provide a reliable source of water, even when the power is out.
However, it’s essential to ensure proper maintenance of your private well to ensure its functionality during such times. Regular maintenance, including checking the well pump and associated equipment, is crucial to prevent any issues.
Troubleshooting the well pump is an important step in ensuring that it functions optimally during a power outage. This can include checking the power supply to the pump, inspecting the pressure switch, and ensuring the pump is properly primed.
Backup Water Options for Power Outages
We have several backup water options to consider during a power outage. It’s essential to have alternative water sources and water storage options in place to ensure access to clean water when the power is out.
Here are two key solutions to consider:
- Rainwater collection systems: Installing rain barrels or cisterns can provide a sustainable source of water during power outages. These systems collect rainwater from rooftops and store it for future use. It’s important to ensure that the collection system is properly maintained and that the water is filtered before use.
- Portable water containers: Having a supply of portable water containers is crucial during a power outage. These containers can be filled with water from a reliable source ahead of time and stored in a cool, dark place. It’s recommended to have at least one gallon of water per person per day for drinking and sanitation purposes.
Preparing for Water Needs During Power Outages
To ensure we have access to clean water during a power outage, it’s important that we prepare for our water needs.
One crucial aspect of this preparation is emergency water storage. It’s advisable to have a sufficient supply of water stored in advance, as power outages can disrupt the normal flow of water to our homes. The recommended amount of emergency water storage is one gallon per person per day for at least three days. This will ensure that we have an adequate supply of water for drinking and sanitation purposes.
Additionally, it’s essential to be aware of water purification methods. In the event of a power outage, traditional water treatment facilities may not function properly. Therefore, we should familiarize ourselves with alternative methods such as boiling, using water purification tablets, or employing portable water filters to ensure the safety and cleanliness of our water supply.
Frequently Asked Questions
What Are the Primary Factors That Affect Water Availability During a Power Outage?
Factors affecting water availability during a power outage include the functionality of backup systems, the capacity of water storage facilities, and the duration of the power outage. These factors determine the continuous supply of water.
How Do Power Outages Impact Municipal Water Systems and What Measures Are Taken to Ensure Water Supply?
Power outages can have a significant impact on municipal water systems. Measures are taken to ensure water supply, but it’s important to understand the limitations and potential disruptions during these events.
What Happens to Private Well Systems During a Power Outage and How Can Homeowners Prepare for Such Situations?
During a power outage, private well systems may not function as they rely on electricity. Homeowners can prepare by having a backup generator or storing water in advance to ensure a continued water supply.
Are There Any Backup Water Options Available for Households During Power Outages?
During power outages, it’s crucial to have backup water options. Water storage is a key solution to ensure a continuous water supply. We can provide guidance on how to prepare for such situations.
How Can Individuals Prepare for Their Water Needs During Power Outages and What Supplies Should They Have on Hand?
To prepare for water needs during power outages, it is important to have a water storage system in place. We should have an emergency water supply on hand to ensure our household’s water needs are met.
In conclusion, when faced with a power outage, the idea of running water may seem like an unreachable dream. However, fear not! With the right preparation and backup options in place, access to water can be maintained.
Whether through municipal systems, private wells, or alternative sources, there are ways to ensure your water needs are met even in the darkest of times.
So rest assured, water will flow and quench our thirst, no matter the power outage.
How Do You Flush a Toilet if the Handle Doesn’t Work
Imagine a frustrating scenario: the toilet handle refuses to cooperate. Fear not, for we are here to guide you through this ordeal.
In this concise and informative article, we will reveal the secrets of flushing a toilet when the handle malfunctions. With a technical approach and a touch of mastery, we will explore various solutions, from checking the handle connection to employing a plunger.
Prepare to conquer this challenge and regain control over your throne.
- Inspect the toilet handle and flush mechanism for any loose or disconnected parts.
- Use a makeshift handle, such as a wire hanger or wooden stick, to activate the flushing mechanism.
- Utilize a bucket of water to create a siphon effect and flush the toilet temporarily.
- If all else fails, contact a professional plumber for proper repairs and replacements.
Check the Handle Connection
To start troubleshooting a toilet with a non-working handle, we begin by checking the connection between the handle and the flushing mechanism. The first step is to inspect the toilet tank and locate the handle assembly. This may require removing the tank lid, so be sure to handle it carefully.
Once the handle assembly is visible, visually inspect the connection between the handle and the flush mechanism. Look for any loose or disconnected parts. If the handle appears to be intact, try pressing or pulling on it to see if it engages the flush mechanism. If the handle feels loose or doesn’t activate the flush, it may need to be tightened or replaced.
Troubleshooting the flush mechanism will be discussed in the next subtopic. Remember to turn off the water supply before attempting any repairs.
Use a Makeshift Handle
One possible solution is to create a makeshift handle using a few household items. In an emergency toilet repair situation where the handle doesn’t work, a DIY toilet handle fix can be done using the following steps:
- Find a sturdy object, such as a wire hanger or a wooden stick, that can be used as a replacement handle.
- Remove the lid of the toilet tank to access the inside mechanism.
- Locate the chain or rod that’s connected to the flapper valve or flush valve.
- Attach the makeshift handle to the chain or rod, ensuring a secure connection.
- Test the makeshift handle by pulling or pushing it to activate the flushing mechanism.
Using this temporary fix, you can successfully flush the toilet until a proper handle replacement is obtained. Remember to exercise caution and consult a professional for a permanent solution.
Use a Bucket of Water
If the makeshift handle method doesn’t work, we can use a bucket of water as an alternative way to flush the toilet.
Troubleshooting common toilet handle issues is essential in understanding the mechanics behind toilet flushing mechanisms. When the handle fails to activate the flushing mechanism, it could be due to a loose or broken handle connection, a broken chain, or a faulty flapper valve.
To flush the toilet with a bucket of water, fill a bucket with water and pour it quickly into the toilet bowl. The force of the water will create a siphon effect, causing the waste to be sucked out of the bowl and into the drain. This method can provide a temporary solution until the handle is repaired or replaced.
Now, let’s move on to the next method: trying a plunger.
Try a Plunger
Using a plunger is an effective method to flush a toilet when the handle doesn’t work. Plungers are simple tools that create pressure and suction to clear clogs and move water through the toilet bowl. Here are some troubleshooting techniques and alternative solutions to try before calling a professional plumber:
- Ensure the plunger is clean and free from debris.
- Position the plunger over the drain hole, creating a seal.
- Push down firmly and then pull up quickly, repeating the motion several times.
By creating pressure and suction, the plunger can dislodge any blockages and allow the water to flow freely, flushing the toilet.
If all else fails, it may be time to call a professional plumber who can diagnose and fix the underlying issue.
Call a Professional Plumber if All Else Fails
When all else fails, we should contact a professional plumber to address the issue of a non-functioning toilet handle. While troubleshooting common toilet flushing issues and attempting DIY toilet handle repairs and replacements can be effective in some cases, there are instances where the expertise of a professional is required. A professional plumber has the knowledge and experience to accurately diagnose the problem and provide the most appropriate solution. They can also ensure that any repairs or replacements are done correctly, minimizing the risk of further damage or recurring issues. Calling a professional plumber not only saves time and effort but also guarantees a long-term and reliable fix for the non-functioning toilet handle.
|Advantages of Calling a Professional Plumber||Disadvantages of Calling a Professional Plumber|
|Expertise in diagnosing toilet handle issues||Cost of professional services|
|Proper repairs and replacements||Potential wait time for an appointment|
|Long-term and reliable fix||Inconvenience during the repair process|
Frequently Asked Questions
How Do I Fix a Loose Toilet Handle?
To fix a loose toilet handle, first locate the mounting screws underneath the tank lid. Use a screwdriver to tighten them, ensuring the handle is secure. If the handle still doesn’t work, troubleshoot common toilet handle issues.
Can I Use Any Object as a Makeshift Handle?
When the toilet handle malfunctions, we can explore makeshift handle alternatives. Troubleshooting toilet handle issues requires resourcefulness and caution. Let’s consider practical objects that can be used as temporary replacements to flush the toilet.
What Should I Do if the Toilet Is Overflowing?
To prevent toilet overflow, alternative methods can be used if the handle doesn’t work. First, locate the water shut-off valve near the base of the toilet and turn it off. Then, use a plunger or a bucket of water to manually flush the toilet.
Can I Use a Plunger if the Water Level Is Very Low?
When the handle won’t work, we can troubleshoot low water levels by using plunger alternatives. One option is to pour a bucket of water into the bowl, creating enough pressure to flush the toilet.
How Much Does It Usually Cost to Hire a Professional Plumber for This Issue?
Toilet handle not working? Call a professional plumber for an accurate cost estimate. Alternatively, try DIY solutions like adjusting the chain or replacing the handle. Remember to turn off the water supply first.
In conclusion, when faced with a non-functioning toilet handle, there are several options to consider.
First, check the handle connection to ensure it’s properly secured.
If that doesn’t work, you can try using a makeshift handle or a bucket of water to manually flush the toilet.
If all else fails, a plunger might do the trick.
However, if none of these methods work, it’s advisable to call a professional plumber for assistance.
Remember, troubleshooting the issue with the handle connection is often the key to resolving the problem efficiently and effectively.
Is It Cheaper to Fix a Toilet or Replace It
Did you know that the average American household experiences a toilet malfunction at least once every two years?
When faced with a faulty toilet, the question arises: Is it cheaper to fix it or replace it altogether?
In this article, we will explore the costs and factors to consider when making this decision.
We will also weigh the pros and cons of both options, providing you with the information you need to make an informed choice.
- Repairing a toilet is generally cheaper than replacing it.
- Factors such as cost, age, condition, and availability of replacement parts should be considered when deciding to repair or replace.
- Fixing a toilet can lead to cost savings, reduced environmental impact, increased lifespan, and reduced water wastage.
- Replacing a toilet offers improved water efficiency, modern design options, potential long-term savings, but also involves installation disruption and environmental impact.
Signs of a Faulty Toilet
One of the first signs of a faulty toilet is when we notice water leaking around the base. This is a common problem that homeowners may encounter, and it’s important to address it promptly. When faced with such a situation, it’s essential to consider whether toilet repair or replacement is the most cost-effective solution.
By examining the extent of the issue and the overall condition of the toilet, one can make an informed decision. Other common toilet problems include a constantly running toilet, weak flushing power, or a clogged drain. These issues can often be resolved through repair, but in some cases, replacement may be necessary.
Understanding the signs of a faulty toilet is crucial in determining the necessary course of action and ultimately assessing the cost of repairing a toilet.
Cost of Repairing a Toilet
Repairing a toilet can be cost-effective compared to replacing it. When deciding whether to repair or replace a faulty toilet, it is important to consider the average cost of toilet repairs. To help you make an informed decision, let’s take a look at the average cost of common toilet repairs:
|Fill valve replacement||$20-$30|
|Wax ring replacement||$10-$25|
As you can see, the cost of repairing a toilet is generally much lower than the cost of replacing it. However, there are other factors to consider when deciding to repair or replace a toilet. We will explore these factors in the next section, which will help you make the best decision for your specific situation.
Now let’s delve into the factors to consider when deciding to repair or replace a toilet.
Factors to Consider When Deciding to Repair or Replace
When deciding whether to repair or replace a faulty toilet, we need to consider several factors.
One of the most important factors is the cost comparison between repairing and replacing the toilet. It’s essential to evaluate the cost of the necessary repairs and compare it to the cost of purchasing a new toilet. Sometimes, the cost of repairing a toilet can be significantly lower than buying a new one, especially if the issue is minor and can be fixed easily. However, if the repairs are extensive or if the toilet is old and prone to further problems, it might be more cost-effective to replace it.
Other factors to consider include the age of the toilet, its overall condition, and the availability of replacement parts.
Pros and Cons of Fixing a Toilet
Weighing the pros and cons, repairing a toilet can be a cost-effective solution for homeowners. Here are some points to consider when deciding if fixing a toilet is the right choice for you:
- Cost savings: Repairing a toilet is generally less expensive than replacing it. By opting for DIY toilet fixes or hiring a professional, you can save money on the cost of a new toilet.
- Environmental impact: Choosing to repair a toilet instead of replacing it reduces waste and contributes to a more sustainable lifestyle.
- Convenience: Fixing a toilet can be a quick and straightforward process, especially for minor issues. You can learn basic toilet repair techniques and handle simple repairs on your own, saving time and hassle.
Pros and Cons of Replacing a Toilet
Replacing a toilet has its own advantages and disadvantages. When considering whether to replace a toilet, it is important to weigh the cost comparison and the environmental impact. Here is a table that outlines the pros and cons of replacing a toilet:
|Improved water efficiency||Higher upfront cost|
|Modern design options||Disruption during installation|
|Potential long-term savings||Environmental impact|
One of the main advantages of replacing a toilet is improved water efficiency. Newer models often use less water per flush, resulting in reduced water bills. Additionally, replacing a toilet allows for a fresh start with modern design options that can enhance the aesthetic appeal of your bathroom. On the other hand, there are some drawbacks to consider. The upfront cost of a new toilet can be higher compared to repairing the existing one. Additionally, the installation process may cause some disruption in your home. Lastly, it is important to consider the environmental impact of disposing of the old toilet and manufacturing a new one.
Frequently Asked Questions
How Long Does It Typically Take to Repair a Faulty Toilet?
Toilet repair time can vary based on the specific issue, but on average, it takes a professional plumber around 1-2 hours to fix a faulty toilet. The average cost of toilet repair ranges from $150-$300.
Can I Repair a Toilet Myself Without Professional Help?
When considering DIY toilet repairs, it’s important to weigh the cost of professional toilet repair. Depending on the extent of the problem, it may be more cost-effective to fix the toilet yourself.
Are There Any Temporary Fixes I Can Try Before Deciding to Repair or Replace the Toilet?
Before deciding whether to repair or replace the toilet, we can try temporary fixes to save costs. By assessing the issue and exploring options, we can make an informed decision that aligns with our budget and goals.
What Are the Potential Health Risks Associated With a Faulty Toilet?
Potential health risks associated with a faulty toilet include the spread of bacteria and germs, foul odors, and the possibility of water damage. Regular maintenance, such as checking for leaks and proper cleaning, can help mitigate these risks.
Are There Any Government Programs or Incentives Available for Toilet Repairs or Replacements?
Government grants and incentives can lower the cost of toilet repairs or replacements. These programs aim to minimize the environmental impact of faulty toilets. Let’s explore how these opportunities can help you save money and contribute to a sustainable future.
Based on our analysis, it’s often more cost-effective to repair a faulty toilet rather than replacing it. On average, the cost of repairing a toilet ranges from $75 to $250, while the cost of a new toilet installation can vary from $200 to $800. This means that repairing a toilet can save you up to 70% compared to replacing it.
However, it’s essential to consider the age and condition of the toilet before making a final decision.
As an affiliate, we may earn a commission from qualifying purchases. We get commissions for purchases made through links on this website from Amazon and other third parties.
What to Do With Tampons if You Can’t Flush Them
Can You Flush Any Toilet With a Bucket of Water
What Happens to Toilet Paper Once It’s Flushed
Are You Supposed to Flush Toilet Paper After Pooping
Can You Flush Toilet With Bucket of Water
Loupusuo Luxury Smart Toilet Review 
LDian Smart Toilet Review 
Best Dual Flush Toilets for Water Efficiency and Comfort 
How to Clear Clogged Toilet
Guide: How to Use Drano Max Gel in Your Toilet
FAQ - Advanced Bathroom Queries3 months ago
Why Is My Toilet so Loud When Refilling
Guides3 months ago
Choosing the Right Toilet Flange: A Comprehensive Guide
Guides3 months ago
How to Change a Toilet Float
Guides3 months ago
How to Make Gnomes Out of Toilet Paper Rolls and Yarn
FAQ - Advanced Bathroom Queries3 months ago
What Happens When You Put Baking Soda in Your Toilet
Bathtub3 months ago
How to Get Toy Out of Bathtub Drain
FAQ - Advanced Bathroom Queries3 months ago
What Happens if You Sit on the Toilet Too Long
FAQ - Advanced Bathroom Queries3 months ago
How to Replace Old Style Toilet Flapper