For most bathrooms, I’d start with the WOODBRIDGE 59-Inch Acrylic Freestanding Bathtub as the best overall pick, while the FerdY Tahiti 55-inch is a stronger fit when floor space is limited. If you want a longer bathing area, the ANZZI Ami 67-inch and other 67-inch models offer a roomier alternative, but need more space and careful access planning. The main tradeoffs are tub length, interior comfort, installation demands, and included drain details. I compare all 15 options by how well they serve different room sizes and buyer priorities, rather than treating similar 59-inch tubs as interchangeable. Continue reading for the full breakdown and a guide to choosing the right acrylic freestanding tub for your bathroom.
Get home appliances delivered free with Prime
- Fast, free delivery on millions of items
- Prime Video, Amazon Music and more included
- Member-only deals all year
Complete the kit
Key Takeaways
- 59-inch tubs form the most flexible middle ground in this lineup: they offer more soaking room than the 55-inch options without demanding the footprint of a 67-inch tub.
- FerdY Tahiti and DeerValley are the compact picks, making them more suitable for tighter bathrooms than the longer Empava and ANZZI models.
- The 67-inch models are for buyers with space to spare; their extra length is useful only if the room layout, doorway, and delivery route can accommodate the tub.
- Included drain and overflow hardware varies by listing, so buyers should verify finish, compatibility, and what is supplied instead of assuming similar 59-inch tubs have identical kits.
- Comfort details can matter as much as exterior dimensions: the double-ended design and GarveeLife’s lumbar support offer distinct priorities, while a larger exterior alone does not guarantee a better fit.
| SYLONWILL 59-Inch Freestanding Acrylic Soaking Bathtub, Glossy White, cUPC Certified |  | Best for Reinforced Support | Material: PMMA acrylic reinforced with resin and fiberglass | Finish: Glossy white | Dimensions: 59 × 31 × 23 in | VIEW ON AMAZON | See Our Full Breakdown |
| 59-Inch Freestanding Acrylic Bathtub with Chrome Drain and Overflow |  | Best for Heat Retention | Brand: Maxsa Innovations | Material: Fiberglass-reinforced acrylic | Color: Marine white | VIEW ON AMAZON | See Our Full Breakdown |
| Empava 59-Inch Freestanding Acrylic Soaking Bathtub |  | Best for Safety and Soaking Depth | Material: Acrylic reinforced with fiberglass | Shape: Oval | Dimensions: 59.1 × 29.5 × 26.8 in | VIEW ON AMAZON | See Our Full Breakdown |
| FerdY Tahiti 55″ Acrylic Freestanding Bathtub |  | Best Compact Pick | Material: Acrylic | Shape: Oval | Dimensions: 55.31 × 30.91 × 23.43 in | VIEW ON AMAZON | See Our Full Breakdown |
| EliteEdge 59-Inch Acrylic Freestanding Bathtub with Chrome Drain and Overflow |  | Best for Simple Fitting | Brand: EliteEdge | Size: 59 in; also available in 67 in | Material: Acrylic reinforced with fiberglass resin | VIEW ON AMAZON | See Our Full Breakdown |
| WOODBRIDGE 59-Inch Acrylic Freestanding Bathtub with Chrome Drain and Overflow |  | Best for Reinforced Construction | Exterior dimensions: 59 × 28.75 × 27.5 inches | Soaking capacity: 58 gallons | Weight: 75 pounds | VIEW ON AMAZON | See Our Full Breakdown |
| DeerValley 55-Inch Acrylic Freestanding Bathtub |  | Best Compact Pick | Model: DV-01T0582 | Dimensions: 55.12 × 29.53 × 22.05 inches | Material and color: Acrylic; white | VIEW ON AMAZON | See Our Full Breakdown |
| ADECAB 59-Inch Acrylic Freestanding Bathtub, Gloss White |  | Best Warranty Coverage | Dimensions: 59 × 31 × 23.25 inches | Material: Acrylic, fiberglass, and resin | Shape and installation: Oval; freestanding | VIEW ON AMAZON | See Our Full Breakdown |
| 59-Inch Acrylic Freestanding Double-Ended Bathtub |  | Best for Flexible Soaking Positions | Length: 59.06 inches | Material: 100% high-gloss acrylic | Design: Freestanding, double-ended | VIEW ON AMAZON | See Our Full Breakdown |
| Empava 59-Inch Freestanding Acrylic Bathtub |  | Best for Straightforward Installation Planning | Model: 59FT1518 | Dimensions: 59.1 × 29.5 inches | Material and color: Acrylic; white | VIEW ON AMAZON | See Our Full Breakdown |
| RHHVVR 59-Inch Acrylic Freestanding Soaking Bathtub |  | Best Overall for a Reinforced 59-Inch Soak | Material: Acrylic | Dimensions: 58.7 × 29.5 × 22.8 inches | Soaking depth: 14.2 inches | VIEW ON AMAZON | See Our Full Breakdown |
| ANZZI Ami 67-Inch Freestanding Acrylic Soaking Bathtub |  | Best for High-Capacity Soaking | Brand and model: ANZZI FT-AZ401 | Material: Marine-grade, fiberglass-reinforced acrylic | Finish: Glossy white | VIEW ON AMAZON | See Our Full Breakdown |
| Empava 67-Inch Freestanding Acrylic Bathtub | | Best for Deep Soaking and Stability | Brand and model: Empava 67FT1518 | Material and color: Acrylic; white | Dimensions: 66.9 × 29.5 inches | VIEW ON AMAZON | See Our Full Breakdown |
| ANZZI Mone Series 67-Inch Freestanding Acrylic Bathtub |  | Best for a Clean, Low-Fuss Design | Brand and model: ANZZI Mone Series AMZFT903-67 | Material and finish: Acrylic; white gloss | Dimensions: 66.5 × 29.1 × 22.4 inches | VIEW ON AMAZON | See Our Full Breakdown |
| GarveeLife 59″ Acrylic Freestanding Soaking Bathtub with Lumbar Support |  | Best Compact Pick for Lumbar Support | Brand: GarveeLife | Material: Lucite acrylic with fiberglass reinforcement | Dimensions: 59 × 28 × 22.8 inches | VIEW ON AMAZON | See Our Full Breakdown |
| acrylic freestanding tub | Dimensions | Material | Included components |
|---|---|---|---|
| SYLONWILL 59-Inch Freestanding | 59 × 31 × 23 in | PMMA acrylic reinforced with resin and fiberglass | — |
| 59-Inch Freestanding Acrylic B | 59.06 × 31.1 × 23.23 in | Fiberglass-reinforced acrylic | Chrome overflow and drain |
| Empava 59-Inch Freestanding Ac | 59.1 × 29.5 × 26.8 in | Acrylic reinforced with fiberglass | — |
| FerdY Tahiti 55" Acrylic Frees | 55.31 × 30.91 × 23.43 in | Acrylic | — |
| EliteEdge 59-Inch Acrylic Free | — | Acrylic reinforced with fiberglass resin | Chrome overflow and drain |
| WOODBRIDGE 59-Inch Acrylic Fre | — | High-gloss acrylic reinforced with resin and fiberglass | Chrome brass drain, stainless steel chrome overflow, and installation manual |
| DeerValley 55-Inch Acrylic Fre | 55.12 × 29.53 × 22.05 inches | — | — |
| ADECAB 59-Inch Acrylic Freesta | 59 × 31 × 23.25 inches | Acrylic, fiberglass, and resin | — |
| 59-Inch Acrylic Freestanding D | — | 100% high-gloss acrylic | Overflow and drain |
| Empava 59-Inch Freestanding Ac | 59.1 × 29.5 inches | — | — |
| RHHVVR 59-Inch Acrylic Freesta | 58.7 × 29.5 × 22.8 inches | Acrylic | Chrome toe-tap drain, overflow device, 22GA brass tailpiece, flexible PVC drainpipe |
| ANZZI Ami 67-Inch Freestanding | 66.93 × 29.53 × 23.23 inches | Marine-grade, fiberglass-reinforced acrylic | Pop-up drain, overflow, adjustable feet |
| Empava 67-Inch Freestanding Ac | 66.9 × 29.5 inches | — | Tub, drain, overflow, user manual |
| ANZZI Mone Series 67-Inch Free | 66.5 × 29.1 × 22.4 inches | — | — |
| GarveeLife 59" Acrylic Freesta | 59 × 28 × 22.8 inches | Lucite acrylic with fiberglass reinforcement | Chrome drain |
More Details on Our Top Picks
SYLONWILL 59-Inch Freestanding Acrylic Soaking Bathtub, Glossy White, cUPC Certified
The SYLONWILL pairs a 59-inch footprint with a reported 1,250-pound bearing capacity, making its stainless steel support frame and adjustable leveling legs a meaningful distinction for buyers focused on a sturdy installation. Its 55.5-gallon capacity also exceeds the 45 gallons listed for the Empava 59-Inch Freestanding Acrylic Soaking Bathtub, while the Empava is narrower and has a stated 15-inch soaking depth. The glossy PMMA surface is designed to resist household chemicals and cosmetic products, and the manufacturer lists a 10-year no-yellowing guarantee. The tradeoff is fit: at 31 inches wide and 88.2 pounds, it may be awkward to move through a tight doorway. I would shortlist it for a bathroom that can accommodate the delivery and installation path.
Pros:- Stainless steel support frame and adjustable leveling legs
- 55.5-gallon capacity
- Glossy PMMA acrylic finish designed to resist household chemicals
- cUPC certification and a 10-year no-yellowing guarantee
Cons:- The 31-inch width and package height may complicate delivery through tight doorways
- Installation instructions call for keeping construction debris out of the drain
- The listed product warranty is 2 years, separate from the no-yellowing guarantee
Best for: Buyers who want a reinforced 59-inch tub, adjustable leveling legs, and a higher stated capacity for longer soaks.
Not ideal for: Owners with narrow doorways or a compact bathroom who cannot accommodate a 59 × 31-inch tub and its package.
- Material:PMMA acrylic reinforced with resin and fiberglass
- Finish:Glossy white
- Dimensions:59 × 31 × 23 in
- Capacity:55.5 gallons
- Empty weight:88.2 lbs
- Bearing capacity:Up to 1,250 lbs
- Certification:cUPC
- Warranty:2 years
- No-yellowing guarantee:10 years
Our verdict“Choose the SYLONWILL if reinforced support and a relatively generous capacity matter more than easy delivery through a tight bathroom entrance.”
59-Inch Freestanding Acrylic Bathtub with Chrome Drain and Overflow
This Maxsa Innovations tub is a straightforward choice for buyers who put heat retention and a relaxed recline ahead of extra documentation. Its fiberglass-reinforced, double-wall construction is intended to help water stay warm, and the chrome drain and overflow are included. The listed dimensions are close to the EliteEdge 59-inch tub, which also combines a reclined backrest, double-wall insulation, and included chrome fittings. The difference is that Maxsa specifies its 97.7-pound weight and a two-year limited warranty, while the EliteEdge listing calls its coverage product support. The Maxsa product data does not specify installation details or a soaking depth, so buyers who need those measurements to plan plumbing or fit should seek confirmation before ordering.
Pros:- Double-wall, fiberglass-reinforced acrylic construction is designed to retain heat
- Reclined backrest and spacious interior
- Chrome drain and overflow included
- Smooth, non-porous surface is easy to clean
Cons:- Installation details are not provided in the product information
- No soaking-depth or capacity figure is listed
- Two-year limited coverage is shorter than the stated warranties on the Empava and FerdY options
Best for: Soakers who want a reclined backrest, double-wall construction, and included chrome drain and overflow in a 59-inch tub.
Not ideal for: Renovators who need clearly stated soaking depth or installation requirements before confirming fit and plumbing.
- Brand:Maxsa Innovations
- Material:Fiberglass-reinforced acrylic
- Color:Marine white
- Dimensions:59.06 × 31.1 × 23.23 in
- Weight:97.7 lbs
- Construction:Double-wall
- Included components:Chrome overflow and drain
- Warranty:2-year limited coverage
Our verdict“Pick this Maxsa model if a warm, reclined soak and included chrome fittings matter more than having every installation measurement specified.”
Empava 59-Inch Freestanding Acrylic Soaking Bathtub
The Empava stands out for giving buyers two useful details that are often missing from freestanding tub listings: a stated 15-inch soaking depth and an ASTM-compliant slip-resistant surface. Its 45-gallon capacity is lower than the SYLONWILL’s 55.5 gallons, but the Empava is also narrower at 29.5 inches, which may suit bathrooms where every inch of floor space matters. A brushed nickel drain and overflow are pre-installed, and the five-year limited warranty is longer than the two-year coverage listed for the Maxsa and SYLONWILL models. The compromise is that its 59.1-inch length still needs a clear installation route, and the faucet filler is sold separately. I’d favor it when depth, grip, and defined specifications matter more than maximum capacity.
Pros:- 15-inch soaking depth and 45-gallon capacity are specified
- ASTM-compliant slip-resistant surface
- Brushed nickel drain and overflow are pre-installed
- Five-year limited manufacturer warranty
Cons:- Faucet filler is sold separately
- 59.1-inch length still requires a suitable bathroom footprint and delivery route
- 45-gallon capacity is lower than the SYLONWILL’s stated 55.5 gallons
Best for: Buyers seeking a defined soaking depth and slip-resistant surface in a 59-inch tub, especially where a slightly narrower footprint helps.
Not ideal for: Shoppers who want the largest listed capacity or need a faucet filler bundled with the tub.
- Material:Acrylic reinforced with fiberglass
- Shape:Oval
- Dimensions:59.1 × 29.5 × 26.8 in
- Capacity:45 gallons
- Soaking depth:15 in
- Weight:80 lbs
- Drain and overflow:Brushed nickel; pre-installed
- Certifications:cUPC certified; ASTM-compliant slip-resistant surface
- Warranty:5-year limited manufacturer warranty
Our verdict“Choose the Empava when slip resistance and a clearly stated 15-inch soaking depth outweigh the need for a higher-capacity tub or included faucet filler.”
FerdY Tahiti 55″ Acrylic Freestanding Bathtub
At 55.31 inches long, the FerdY Tahiti is the clear fit-focused alternative to the 59-inch SYLONWILL, Maxsa, and Empava tubs in this group. It still lists a 61-gallon capacity, plus 14 inches of water depth, so its shorter length does not come with a low stated capacity. The sloped lumbar support and double-walled fiberglass insulation target comfort and longer soaks, while the brushed nickel drain and integrated slotted overflow arrive included. Its six-year manufacturer warranty is also longer than the two-year coverage listed for SYLONWILL and Maxsa. The tradeoffs are that its 30.91-inch width still needs careful room planning, and alternative drain finishes are sold separately. At 72.8 pounds, installation may also call for help moving it into position.
Pros:- Shorter 55.31-inch length than the other 59-inch models in this batch
- Listed 61-gallon capacity and 14-inch water depth
- Double-walled fiberglass insulation and sloped lumbar support
- Brushed nickel drain and integrated slotted overflow included
Cons:- Alternative drain finishes require a separate kit
- 30.91-inch width may still be too large for a narrow bathroom
- Moving and positioning the tub may require assistance
Best for: Buyers with a tighter length constraint who still want a high stated capacity, lumbar support, and included drain hardware.
Not ideal for: Shoppers set on a drain finish other than brushed nickel without buying a separate drain kit, or those installing without lifting help.
- Material:Acrylic
- Shape:Oval
- Dimensions:55.31 × 30.91 × 23.43 in
- Weight:72.8 lbs
- Capacity:61 gallons
- Water depth:14 in
- Finish:Glossy white with brushed nickel drain
- Certification:cUPC certified
- Warranty:6-year manufacturer warranty
Our verdict“The Tahiti is a strong fit for buyers who need a shorter tub without giving up a high listed capacity or built-in lumbar support.”
EliteEdge 59-Inch Acrylic Freestanding Bathtub with Chrome Drain and Overflow
The EliteEdge makes a practical case for buyers who want a 59-inch double-wall tub with the drain and overflow already fitted. Its reclined backrest and non-porous glossy surface follow the same comfort-and-cleanup priorities as the Maxsa model, and both listings include chrome hardware. EliteEdge also notes that a 67-inch size is available, giving buyers a route to a longer tub within the same product line. The listing provides less technical detail than Maxsa, though: it does not state the tub’s width, height, weight, capacity, or a formal warranty term, and describes a two-year support program instead. That makes it harder to verify room fit and compare coverage. I’d choose it only after confirming the missing dimensions and installation requirements.
Pros:- Double-wall insulation is designed to help retain water temperature
- Reclined backrest supports a more relaxed soaking position
- Pre-installed chrome drain and overflow
- Non-porous glossy surface is designed for easy cleaning
Cons:- Product information does not specify width, height, weight, or capacity
- Two-year support program is not described as a formal warranty
- Installation details are not provided
Best for: Buyers who want a 59-inch acrylic tub with pre-installed chrome drain and overflow and who can verify fit details with the seller.
Not ideal for: Planners who need published dimensions, capacity, weight, or a clearly defined warranty before committing to a tub.
- Brand:EliteEdge
- Size:59 in; also available in 67 in
- Material:Acrylic reinforced with fiberglass resin
- Color:Glossy white
- Construction:Double-wall
- Included components:Chrome overflow and drain
- Installation:Drain and overflow pre-installed
- Support:2-year product support
Our verdict“Consider the EliteEdge if its pre-installed chrome fittings suit your plan, but confirm dimensions and coverage before choosing it over the more fully specified Maxsa.”
WOODBRIDGE 59-Inch Acrylic Freestanding Bathtub with Chrome Drain and Overflow
The WOODBRIDGE 59-inch tub is a strong match for buyers who want a freestanding acrylic model with clearly stated structural support: its resin- and fiberglass-reinforced, double-walled build has a listed 1,000-pound weight capacity. That makes its construction credentials more concrete than the DeerValley 55-inch tub, whose supplied specs focus more on compact dimensions than load capacity. The slip-resistant surface and included chrome brass drain and stainless steel overflow also reduce some finishing and maintenance concerns. Its 58-gallon capacity is generous for a 59-inch tub, though this remains a one-person bathing design, not a shared soak. At 75 pounds, it may take two people to move into place, and its one-year limited warranty is shorter than ADECAB’s stated coverage.
Pros:- Double-walled acrylic reinforced with resin and fiberglass, with a listed 1,000-pound weight capacity
- Slip-resistant surface is designed to improve footing
- Scratch- and stain-resistant surface is intended to simplify cleaning
- Chrome brass drain, stainless steel overflow, and installation manual are included
Cons:- Designed for one-person bathing rather than shared soaking
- The 75-pound listed weight may make moving and installation a two-person job
- One-year limited warranty is shorter than ADECAB’s stated 10-year warranty
Best for: Buyers who want a reinforced 59-inch acrylic tub with a stated high load capacity and included drain and overflow.
Not ideal for: Shoppers seeking a longer warranty, a two-person bathing layout, or a particularly light tub that is easy to move alone.
- Exterior dimensions:59 × 28.75 × 27.5 inches
- Soaking capacity:58 gallons
- Weight:75 pounds
- Material:High-gloss acrylic reinforced with resin and fiberglass
- Shape and installation:Oval; freestanding
- Weight capacity:Up to 1,000 pounds
- Included components:Chrome brass drain, stainless steel chrome overflow, and installation manual
- Certifications:CSA B45.5-17 and IAPMO Z124-2017
- Warranty:1-year limited warranty
Our verdict“Choose the WOODBRIDGE if reinforced construction and included fittings matter more to you than a long warranty or shared-bathing space.”
DeerValley 55-Inch Acrylic Freestanding Bathtub
The DeerValley 55-inch tub is the space-conscious choice in this group. Its shorter length can suit bathrooms where a 59-inch model such as the Empava 59FT1518 would be harder to fit, while the rectangular shape gives the footprint a more tailored look than the oval tubs here. Freestanding placement also gives you flexibility to position it around the room, and the smooth acrylic surface is designed for straightforward cleaning. The tradeoff is bathing room: at 55 inches, it may feel restrictive for taller adults or anyone who wants to stretch out. The supplied product data also gives no soaking capacity, water depth, load capacity, or warranty, so buyers who need those details should compare carefully before choosing it.
Pros:- 55-inch length suits bathrooms with less space for a standard 59-inch tub
- Rectangular profile offers a distinct alternative to the oval models in this group
- Freestanding installation allows flexible placement
- Center drain, integrated overflow, stainless steel overflow cover, and chrome-finished drain are specified
Cons:- Shorter basin may feel cramped for taller users or anyone wanting to stretch out
- Product data does not specify soaking capacity, water depth, or load capacity
- No warranty details are provided in the supplied specifications
Best for: Owners of smaller bathrooms who want a freestanding acrylic tub and can accept a shorter bathing length.
Not ideal for: Taller bathers or anyone prioritizing a spacious, deep soak or needing confirmed capacity and warranty details before purchase.
- Model:DV-01T0582
- Dimensions:55.12 × 29.53 × 22.05 inches
- Material and color:Acrylic; white
- Shape:Rectangular
- Installation:Freestanding
- Drain:Center drain
- Overflow:Integrated; stainless steel cover specified
- Faucet compatibility:Compatible with most freestanding tub faucets
Our verdict“Pick the DeerValley when fitting a tub into a smaller bathroom matters more than having the longer soaking area of the Empava 59FT1518.”
ADECAB 59-Inch Acrylic Freestanding Bathtub, Gloss White
The ADECAB 59-inch tub stands apart for buyers who place a long stated warranty ahead of installation simplicity: its product data lists 10 years for defective products, compared with the one-year limited warranty supplied for the WOODBRIDGE. The oval basin has ergonomic lumbar support, a 17-inch water depth, and double-wall construction intended to help retain warmth, so it is geared toward longer, more supported soaks than the compact DeerValley. Its cUPC certification is another useful specification. There are caveats: the pipe is not included, and the supplied weight information conflicts, listing both 112.4 and 88 pounds. Confirming the exact shipping or empty weight and plumbing requirements before arranging delivery is sensible. Its stated load capacity also appears as a range rather than one figure.
Pros:- 10-year warranty for defective products is longer than the WOODBRIDGE’s stated coverage
- 17-inch water depth and lumbar support suit longer soaking sessions
- Double-wall construction is intended to help retain bathwater warmth
- cUPC certified, with a drain pop-up assembly included
Cons:- Pipe is not included and must be sourced separately
- Product information conflicts on empty weight, listing both 112.4 and 88 pounds
- Load capacity is given as a range of 820–1300 pounds rather than a single confirmed figure
Best for: Soakers who want lumbar support, a stated 10-year warranty, and a deeper basin, and who can source the pipe separately.
Not ideal for: Buyers who need a clearly confirmed tub weight or want all plumbing components included in one package.
- Dimensions:59 × 31 × 23.25 inches
- Material:Acrylic, fiberglass, and resin
- Shape and installation:Oval; freestanding
- Water depth:17 inches
- Soaking capacity:57.2 gallons
- Empty weight:Conflicting supplied figures: 112.4 pounds and 88 pounds
- Load capacity:820–1300 pounds
- Included and excluded components:Drain pop-up assembly included; pipe not included
- Certification and warranty:cUPC; 10 years for defective products
Our verdict“Choose ADECAB over the WOODBRIDGE if the longer stated warranty and lumbar-supported soak matter more than included pipework and consistent weight information.”
59-Inch Acrylic Freestanding Double-Ended Bathtub
This 59-inch double-ended tub is the most position-flexible option in this batch: tilted lumbar support at both ends lets bathers settle in from either side, unlike the Empava 59FT1518, which specifies ergonomic back support without a double-ended layout. Its deep basin is intended for fuller immersion, and the non-slip base adds reassurance underfoot; the product data also lists ASTM non-slip standards and cUPC certification. Drain and overflow are included, which helps keep the main components together. The tradeoff is limited fit information: only the length is supplied, so you cannot compare its width or height with the more fully specified WOODBRIDGE. The listing also says installation requires following the included instructions, making careful setup part of the purchase rather than an afterthought.
Pros:- Double-ended layout with tilted lumbar support allows soaking from either end
- Deep basin is intended to support fuller-body immersion
- Non-slip base and stated ASTM non-slip standards address footing
- Overflow and drain are included; cUPC certified
Cons:- Supplied dimensions give length only, leaving width and height unclear
- Installation requires careful use of the included instructions
- No soaking capacity or water-depth figure is supplied for comparison
Best for: Bathers who want a 59-inch tub with support at either end and a deep-soak design.
Not ideal for: Buyers who need full width and height specifications before planning a tight bathroom layout or who want a clearly simple installation.
- Length:59.06 inches
- Material:100% high-gloss acrylic
- Design:Freestanding, double-ended
- Load capacity:Up to 1,000 pounds
- Safety:Non-slip base; meets ASTM non-slip standards
- Certification:cUPC
- Included components:Overflow and drain
Our verdict“Choose this model over the Empava 59FT1518 if you want lumbar support at either end and can confirm the missing fit details before ordering.”
Empava 59-Inch Freestanding Acrylic Bathtub
The Empava 59FT1518 is a practical pick for buyers who want core soaking details spelled out rather than inferred: it lists a 15-inch soaking depth, 45-gallon capacity, center drain, overflow, and adjustable leveling feet. Those feet can help address minor floor unevenness during setup, while the included drain and overflow make the package more complete than the ADECAB, which excludes its pipe. Double-wall construction is intended to retain heat, and the ergonomic back support adds comfort without the double-ended arrangement of the 59-inch model above. Its 45-gallon capacity is lower than the WOODBRIDGE’s listed 58 gallons, so it may be less appealing to buyers prioritizing a larger water volume. You will also need an externally installed faucet, which should factor into the room’s plumbing plan.
Pros:- 15-inch soaking depth and 45-gallon capacity are specified for planning
- Adjustable leveling feet can help with minor floor unevenness
- Center drain and overflow are included
- Reinforced double-wall construction and ergonomic back support are specified
Cons:- 45-gallon capacity is lower than the WOODBRIDGE’s listed 58 gallons
- Requires an externally installed faucet
- Supplied dimensions give length and width but no height
Best for: Renovators who want specified soaking dimensions, included drain and overflow, and leveling feet for a freestanding installation.
Not ideal for: Buyers seeking a higher stated capacity than 45 gallons or a tub with a faucet included rather than externally installed.
- Model:59FT1518
- Dimensions:59.1 × 29.5 inches
- Material and color:Acrylic; white
- Soaking depth:15 inches
- Capacity:45 gallons
- Construction:Reinforced double-wall
- Drain and overflow:Center drain and overflow included
- Features:Ergonomic back support, anti-slip bottom, adjustable leveling feet
- Certification and warranty:cUPC; 10-year tub warranty and 5-year accessory warranty
Our verdict“Choose the Empava if clear soaking specifications and leveling feet matter more than the WOODBRIDGE’s larger stated capacity.”
RHHVVR 59-Inch Acrylic Freestanding Soaking Bathtub
The RHHVVR 59-inch tub is my strongest all-round pick for buyers who want a mid-size freestanding acrylic model with a more substantial build. Its 8-layer, double-wall construction is designed to retain heat, while the reinforced base and stated 600 lb load capacity offer reassurance for shared household use. The 14.2-inch soaking depth and sloped backrest add comfort without requiring the 67-inch footprint of the ANZZI Ami. It also includes the center drain, overflow, and drainpipe, reducing the number of plumbing components to source separately. The tradeoff is its nearly 30-inch width and installation dependence on the room’s floor and plumbing layout. Compared with the shorter GarveeLife, it offers a higher stated load capacity and more installation components, but gives up some of that model’s compact width.
Pros:- Double-wall, 8-layer construction is designed to help retain bathwater warmth
- Sloped backrest supports a more relaxed reclining position
- Reinforced base has a stated 600 lb load capacity
- Center drain, overflow, drainpipe, and leveling feet are included
Cons:- Nearly 59 inches long and 29.5 inches wide, so it needs a generous placement area
- Floor and plumbing conditions may affect installation requirements
Best for: Buyers who want a reinforced 59-inch tub with a sloped backrest, included drain components, and a stated 600 lb load capacity.
Not ideal for: Bathrooms with tight floor plans or plumbing that cannot accommodate a center drain without changes.
- Material:Acrylic
- Dimensions:58.7 × 29.5 × 22.8 inches
- Soaking depth:14.2 inches
- Shape and installation:Oval; freestanding
- Construction:8-layer, double-wall
- Load capacity:600 lb
- Drain location:Center
- Included components:Chrome toe-tap drain, overflow device, 22GA brass tailpiece, flexible PVC drainpipe
- Certification:cUPC
Our verdict“Choose the RHHVVR if you want a reinforced, well-equipped 59-inch tub and have room to plan around its footprint and center drain.”
ANZZI Ami 67-Inch Freestanding Acrylic Soaking Bathtub
The ANZZI Ami suits buyers who prioritize a long, high-capacity soak over a compact footprint. At nearly 67 inches long, it is a larger option than the RHHVVR 59-inch tub, and its stated 91-gallon capacity makes that extra length meaningful for shoppers seeking a roomier bath. Marine-grade acrylic reinforced with fiberglass provides the material construction, while the pop-up drain, overflow, and adjustable feet come with the tub. A limited lifetime warranty for residential use is another distinction, though its coverage has exclusions for matters such as improper installation, misuse, abrasive cleaners, and commercial use. This model does not list a soaking depth or load capacity, so buyers who need those measurements should compare it with the Empava 67-inch, which specifies a 15-inch soaking depth.
Pros:- 91-gallon stated capacity suits buyers seeking a larger-volume soak
- Marine-grade acrylic is reinforced with fiberglass
- Pop-up drain, overflow, and adjustable feet are included
- Limited lifetime residential warranty is specified
Cons:- Nearly 67 inches long, requiring more room than 59-inch options
- Soaking depth and load capacity are not listed in the supplied product data
- Warranty coverage excludes several installation, use, and cleaning conditions
Best for: Buyers with a spacious bathroom who want a long oval tub, a stated 91-gallon capacity, and included drain hardware.
Not ideal for: Shoppers with limited floor space or anyone who needs a published soaking-depth or load-capacity figure before choosing.
- Brand and model:ANZZI FT-AZ401
- Material:Marine-grade, fiberglass-reinforced acrylic
- Finish:Glossy white
- Dimensions:66.93 × 29.53 × 23.23 inches
- Shape and installation:Oval; freestanding
- Capacity:91 gallons
- Included components:Pop-up drain, overflow, adjustable feet
- Warranty:Limited lifetime warranty for residential use
Our verdict“Pick the ANZZI Ami when bathroom space is ample and its stated 91-gallon capacity matters more than a specified soaking depth.”
Empava 67-Inch Freestanding Acrylic Bathtub
The Empava 67-inch makes the most sense for buyers who want a defined soaking depth and added footing features in a full-length freestanding tub. Its 15-inch soaking depth is specified, unlike the ANZZI Ami’s supplied product details, and the double-wall construction is designed to reduce heat loss during a bath. A textured bottom, adjustable leveling feet, and included center drain and overflow make its practical setup details unusually clear. The stated capacity is 50 gallons, well below the Ami’s 91 gallons, so the two models serve different soaking priorities rather than simply differing in length. Empava’s main fit limitation is faucet planning: the faucet is installed externally, which calls for a suitable location and plumbing arrangement. Its bathtub warranty is listed as 10 years, with a separate five-year term for accessories.
Pros:- Specified 15-inch soaking depth supports informed fit and comfort planning
- Double-wall construction is designed to help retain heat
- Textured bottom and adjustable feet address footing and leveling
- Center drain and overflow are included
Cons:- Requires an externally installed faucet and suitable plumbing placement
- Listed 50-gallon capacity is lower than the ANZZI Ami’s stated 91 gallons
Best for: Buyers planning a full-length tub who value a specified 15-inch soaking depth, textured footing, and included drain and overflow.
Not ideal for: Shoppers who want a tub with a built-in faucet or whose priority is the larger stated capacity of the ANZZI Ami.
- Brand and model:Empava 67FT1518
- Material and color:Acrylic; white
- Dimensions:66.9 × 29.5 inches
- Soaking depth:15 inches
- Capacity:50 gallons
- Installation and drain:Freestanding; center drain
- Certification:cUPC
- Included components:Tub, drain, overflow, user manual
- Warranty:10 years for bathtub; 5 years for accessories
Our verdict“Choose the Empava if you want a deep, feature-focused 67-inch soak and can plan for a separate faucet installation.”
ANZZI Mone Series 67-Inch Freestanding Acrylic Bathtub
The ANZZI Mone Series is the simpler choice for buyers focused on a clean freestanding look and straightforward surface care rather than a long list of specialized comfort features. Its glossy acrylic finish and integrated overflow pair with a 63.4-gallon stated capacity and 14-inch soaking depth. That makes its capacity more generous than the Empava 67-inch’s listed 50 gallons, while its soaking depth is one inch shallower. The flat-bottom design gives the Mone a distinct profile, but the supplied details do not list a drain component, adjustable feet, or warranty; buyers should confirm those details before finalizing a purchase. At 66.5 inches long, it remains a large fixture, so the more compact RHHVVR or GarveeLife may be easier to accommodate in a smaller bathroom.
Pros:- 63.4-gallon capacity is specified for planning
- Integrated overflow helps manage bathwater level
- Smooth glossy acrylic surface is designed for easy maintenance
- Flat-bottom profile and white finish suit varied bathroom styles
Cons:- Large footprint may not fit compact bathroom layouts
- Supplied product details do not specify drain hardware or adjustable feet
- Its 14-inch soaking depth is shallower than the Empava 67-inch’s 15 inches
Best for: Buyers who want a 67-inch-class glossy acrylic tub with a stated 14-inch soaking depth and integrated overflow.
Not ideal for: Small bathrooms, or buyers who need confirmation of included drain hardware, leveling feet, or warranty coverage before ordering.
- Brand and model:ANZZI Mone Series AMZFT903-67
- Material and finish:Acrylic; white gloss
- Dimensions:66.5 × 29.1 × 22.4 inches
- Installation:Freestanding
- Capacity:63.4 gallons
- Soaking depth:14 inches
- Bottom dimensions:44.9 × 17.3 inches
- Overflow:Integrated
Our verdict“The Mone is a good fit for buyers who favor a simple glossy design and clear capacity details, provided they verify the missing hardware information.”
GarveeLife 59″ Acrylic Freestanding Soaking Bathtub with Lumbar Support
The GarveeLife 59-inch tub is the lineup’s compact comfort pick: its 28-inch width is narrower than the RHHVVR’s 29.5 inches, while lumbar support and a non-slip base target everyday bathing comfort. Its 4mm Lucite acrylic is fiberglass-reinforced, and double-wall insulation is claimed to retain heat up to 35% longer than standard tubs. That figure is a product claim, not a directly comparable measurement supplied for the other models. The pop-up drain includes an integrated hair catcher, a useful practical detail absent from the RHHVVR’s listed drain description. The tradeoff is limited load information: no weight capacity is stated, unlike RHHVVR’s 600 lb figure. It is also freestanding, so it still needs usable floor area, and the acrylic surface calls for scratch-conscious care.
Pros:- Narrower 28-inch width than the RHHVVR 59-inch tub
- Lumbar support and a non-slip base are specified
- Double-wall insulation is designed to extend heat retention
- Pop-up drain includes an integrated hair catcher
Cons:- Weight capacity is not specified in the supplied product data
- Acrylic can scratch if cleaned or handled with abrasive materials
- Freestanding placement still needs clear floor space
Best for: Buyers fitting a 59-inch tub into a relatively narrow space who want lumbar support, a non-slip base, and a pop-up drain with hair catcher.
Not ideal for: Households that require a published load capacity or buyers who prefer a wider tub with more installation components listed.
- Brand:GarveeLife
- Material:Lucite acrylic with fiberglass reinforcement
- Dimensions:59 × 28 × 22.8 inches
- Color and installation:White; freestanding
- Construction:4mm acrylic; double-wall insulation
- Drain type:Pop-up with integrated hair catcher
- Certification:CUPC certified; ADA compliant
- Included components:Chrome drain
Our verdict“Choose the GarveeLife for a narrower 59-inch footprint and lumbar-focused comfort, but look to the RHHVVR if a stated load capacity is a priority.”
How We Picked
I ranked these tubs around the decisions that shape a successful freestanding installation: footprint, likely bathing comfort, stated construction and certification details, included hardware, and fit for different bathroom layouts. I treated the 55-, 59-, and 67-inch options as serving different needs rather than assuming longer is always better. Product names and listed features informed the comparison, but buyers should confirm current specifications, installation requirements, and included parts with the seller before ordering.
The 59-inch WOODBRIDGE leads as a balanced starting point for buyers who want a standard-size acrylic soaking tub, while compact models rank higher for space-constrained rooms and the longer ANZZI and Empava options suit bathrooms that can use their added length. Models with a clearly stated comfort or design distinction—such as the double-ended tub or GarveeLife’s lumbar support—stand out for specific needs, not as universal upgrades. Similar listings without a clear differentiator rank below options with more identifiable fit, comfort, or product details.
Factors to Consider When Choosing Acrylic Freestanding Tub
Before choosing a model, I’d match the tub to the room and the people who will use it—not just the product photo. These checks can prevent common problems such as ordering a tub that cannot pass through the doorway, discovering the drain does not align, or paying for extra length that leaves too little space around the fixture.
Measure the Room and the Delivery Route
Start by measuring the available floor area, then mark the tub’s full exterior footprint with tape so you can judge walking clearance and access to nearby fixtures. A 67-inch model may suit a spacious bathroom, but it can crowd a room that would feel comfortable with a 59-inch tub. Measure doorways, halls, stair turns, and any other pinch points along the delivery path, not just the final bathroom opening. Ask for the tub’s exact exterior dimensions and packaging dimensions before purchase, since the carton can be wider than the fixture. Freestanding tubs also need enough clearance for cleaning and plumbing access. If a measurement is close, favor the smaller size rather than relying on a tight maneuver during delivery.
Compare Usable Interior Space, Not Just Length
Exterior length alone does not tell you how much room you will have to soak. The shell shape, slope at each end, and placement of the drain can reduce usable interior space even when two tubs share the same listed length. Double-ended designs can appeal to buyers who want a more symmetrical lounging position, while a stated lumbar-support feature may matter to someone who values back contact. Check interior measurements, basin depth, and water capacity when the seller provides them. If two people may use the tub, confirm its intended capacity and whether its interior shape actually accommodates that use. A longer exterior is most useful when the bathing well gains usable room too.
Check Floor Support, Plumbing, and Drain Alignment
A freestanding tub can require more planning than a drop-in replacement because its drain location and supply connections must work with the room layout. Before ordering, compare the model’s drain position with the existing plumbing and ask a plumber whether relocation is needed. Confirm the tub’s filled weight, including water and occupants, against the floor’s capacity, especially in an upper-floor bathroom. Check whether the drain and overflow are included, what finish they have, and whether the listed kit matches your plumbing setup. A chrome kit may not suit a room planned around another finish, and a missing or incompatible component can add work after delivery. Get installation requirements in writing before the tub arrives.
Understand What Acrylic Construction Means for Care
Acrylic is often chosen for its smooth surface and relatively manageable weight compared with some heavier tub materials, but care instructions still vary by product. Ask the manufacturer which cleaners and sponges are approved, and avoid assuming that abrasive powders or pads are safe. Review the stated construction, reinforcement, warranty, and care guidance rather than judging durability by gloss alone. A bright finish can show residue or scratches, so routine rinsing and gentle cleaning help keep the surface presentable. If the listing mentions certification, verify which product and standard it covers. Clear documentation is more useful than a vague claim about quality.
Decide When Extra Length or Features Are Worth It
Paying for a 67-inch tub makes sense when the room can accommodate it and the added length improves the bathing position for the intended user. It is a poor trade if the larger footprint cuts into circulation or makes cleaning around the tub difficult. A comfort feature such as lumbar support can be more valuable than extra exterior length for a buyer who wants a particular backrest shape. By contrast, buyers who mainly need a straightforward soaking tub may prefer a simpler 59-inch model and spend attention on installation quality. Compare the features you will use against the space and plumbing work they may require. Choose upgrades for a specific need, not because a longer feature list looks more impressive.
Confirm the Seller’s Specifications Before Ordering
Several products in this roundup have similar names and dimensions, so I would verify the exact model number and current listing before checkout. Look for a complete specification sheet covering exterior and interior dimensions, drain location, overflow, water capacity, tub weight, and included hardware. Check whether the drain and overflow are supplied or sold separately, and confirm their finish if appearance matters in your bathroom. Ask about shipping condition procedures and what to do if the tub arrives damaged. Save the manufacturer’s installation and warranty documents for your contractor. These checks help distinguish a genuinely suitable tub from a listing that only appears to match your needs.
Frequently Asked Questions
Should I choose a 55-inch, 59-inch, or 67-inch acrylic freestanding tub?
I’d choose based on both room clearance and the bathing position you want. The 55-inch FerdY Tahiti and DeerValley models are the more space-conscious options in this group, while 59 inches is the lineup’s most adaptable size range. A 67-inch tub, such as the ANZZI Ami or Empava, is better suited to a room with enough floor area and a clear delivery route. Compare interior measurements as well as exterior length, since the larger outside dimension does not automatically mean a proportionally roomier basin. If the tub would leave cramped access or limited cleaning space, the shorter size is likely the better fit.
Can I replace a built-in tub with a freestanding acrylic tub without moving plumbing?
Sometimes, but I would not assume the existing drain will line up with the new tub. Built-in tubs and freestanding models can place the waste outlet differently, and the freestanding design may expose connections that were hidden before. Compare the new tub’s drain location with the current plumbing and have a plumber check supply lines, trap access, and floor conditions. Also confirm whether the selected model includes a compatible drain and overflow assembly. If plumbing changes are needed, account for that work before choosing between similar tubs.
How much weight can an acrylic freestanding tub add to my floor?
The total load includes the tub, the water it holds, and the people using it, so the empty-tub weight alone is not enough to judge suitability. Ask the manufacturer for the tub’s weight and capacity, then have a qualified contractor assess the floor, especially in an upstairs bathroom or an older home. The added water load can be substantial, and freestanding tubs concentrate it over a smaller footprint than some built-in layouts. Do not rely on a general rule of thumb when floor framing is uncertain. Confirming support before delivery is safer than trying to solve a structural issue during installation.
Are the chrome drain and overflow parts included with these tubs?
Some listings explicitly name a chrome drain and overflow, while other product names do not state what hardware comes with the tub. I would check the current listing and product documentation for each exact model rather than assuming the parts are included because a similar tub has them. Confirm the finish, drain position, overflow compatibility, and whether any fittings must be purchased separately. This is particularly useful if you are coordinating the tub with existing bathroom fixtures or a plumber’s installation plan. Ask the seller for clarification before ordering if the listing does not clearly identify the contents.
Is a 67-inch tub worth choosing over a 59-inch model?
A 67-inch tub is worth the extra footprint when its interior dimensions give the intended user a more comfortable bathing position and the room can accommodate it without restricting access. The ANZZI and Empava 67-inch options suit buyers planning around a larger fixture, while the lineup’s 59-inch models offer a more adaptable size for many layouts. Check doorway and hallway measurements as well as the bathroom plan; a tub that fits on paper may still be difficult to deliver. Compare actual basin dimensions and capacity before treating length as a comfort guarantee. If the longer model crowds the room, a well-matched 59-inch option is the more practical choice.
Conclusion
For a balanced starting point, I’d choose the WOODBRIDGE 59-Inch as the best overall option in this lineup. The FerdY Tahiti 55-inch is my pick for a smaller bathroom, while shoppers comparing simpler standard-size tubs can shortlist the 59-inch Empava models as value-oriented alternatives after checking their exact specifications and included parts. For a premium-sized bathing area, consider the ANZZI Ami 67-inch or Empava 67-inch only if room measurements and delivery access support the larger footprint. Beginners should favor a clearly documented 59-inch model and confirm drain compatibility before ordering; buyers with a specific comfort priority can look at the double-ended design or GarveeLife’s lumbar support. My final choice would come down to usable interior dimensions, plumbing fit, and room clearance—not length alone.
Fall yard work Picks
leaf blowers
As an affiliate, we earn on qualifying purchases.
