For an indoor gas tankless water heater, I’d start with the Rheem RTGH-84DVLN-3 as the best overall choice in this lineup for households that need strong flow capacity. The Rinnai RE199iN is a standout for buyers who prefer an established brand, while the VEVOR 100,000 BTU offers a lower-capacity alternative for lighter demand. The central tradeoff is between flow capacity for simultaneous hot-water use and the installation, venting, and gas-supply demands of a larger unit. Smaller models may suit a compact household, but their output can fall short when several fixtures run at once. Read on for the full breakdown and a guide to matching capacity and installation needs to your home.
Get home appliances delivered free with Prime
- Fast, free delivery on millions of items
- Prime Video, Amazon Music and more included
- Member-only deals all year
Complete the kit
Key Takeaways
- Capacity divides this lineup. The Rheem RTGH-84DVLN-3, GASLAND Gasmart E, and Westinghouse models sit in the higher-output group, while several 3.6–5 GPM choices are better matched to lighter household demand.
- BTU and GPM tell different parts of the story. A high BTU figure signals heating input, while usable flow depends on incoming water temperature and the desired temperature rise.
- Brand and product details vary widely. Rheem and Rinnai provide more recognizable model identities in this group; buyers should verify specifications, parts support, and warranty terms for less familiar listings.
- Indoor installation is not a simple swap. Venting, gas-line capacity, combustion air, condensate handling where applicable, and local code can change the total project scope.
- Small-capacity units have a clearer household fit. Models around 3.6–4.3 GPM may work for modest simultaneous demand, but they are less suited to multiple showers and fixtures running together.
| VEVOR Indoor Natural Gas Tankless Water Heater, 100,000 BTU | ![]() | Best Overall for High Capacity and Precise Control | Brand: VEVOR | Model: JSQ30-A | Fuel: Natural gas | VIEW ON AMAZON | See Our Full Breakdown |
| Natural Gas Tankless Water Heater Indoor 4.21 GPM 16L Instant Hot Gas Water Heater with Fahrenheit Digital Display Multi-Protection | ![]() | Best for Efficiency and Space-Saving Performance | Power Source: Natural Gas | Flow Rate: 4.21 GPM (16 L/min) | Maximum Temperature: 167 °F | VIEW ON AMAZON | See Our Full Breakdown |
| Novieex Indoor Natural Gas Tankless Water Heater, 4.3 GPM, 100,000 BTU | ![]() | Best for Adjustable Temperature and Safety Protections | Fuel: Natural gas | Flow rate: Up to 4.3 GPM | Heat output: 100,000 BTU/h | VIEW ON AMAZON | See Our Full Breakdown |
| APUS Natural Gas Tankless Water Heater, 80,000 BTU, 3.6 GPM, Indoor | ![]() | Best for Compact, Low-Flow Needs | Fuel type: Natural gas | Maximum output: 80,000 BTU | Flow rate: 3.6 GPM | VIEW ON AMAZON | See Our Full Breakdown |
| FOGATTI Indoor Natural Gas Tankless Water Heater | ![]() | Best for High Capacity and Versatile Outlets | Fuel: Natural gas | Heating output: 120,000 BTU | Flow rate: 5.1 GPM | VIEW ON AMAZON | See Our Full Breakdown |
| Rheem RTG-70DVLN-3 Indoor Natural Gas Tankless Water Heater, 7.0 GPM, 160,000 BTU | ![]() | Best for Consistent Everyday Hot Water | Model: RTG-70DVLN-3 | Fuel and installation: Natural gas; indoor | Maximum flow rate: 7.0 GPM | VIEW ON AMAZON | See Our Full Breakdown |
| GASLAND Gasmart E Natural Gas Tankless Water Heater, 199,000 BTU, 7.6 GPM | ![]() | Best for High Heat Input in a Compact Unit | Model: CE686NG | Fuel and installation: Natural gas; indoor | Heat output: 199,000 BTU | VIEW ON AMAZON | See Our Full Breakdown |
| Rheem RTGH-84DVLN-3 Indoor Natural Gas Tankless Water Heater, 8.4 GPM | ![]() | Best Condensing Rheem Pick | Model: RTGH-84DVLN-3 | Fuel and installation: Natural gas; indoor, direct vent | Maximum flow rate: 8.4 GPM at 35°F rise | VIEW ON AMAZON | See Our Full Breakdown |
| ThermoMate CZ422NG Indoor Natural Gas Tankless Water Heater, 5 GPM | ![]() | Best Compact Pick for Lower Demand | Fuel and installation: Natural gas; indoor | Maximum flow rate: 5 GPM | Heat output: 113,000 BTU | VIEW ON AMAZON | See Our Full Breakdown |
| MIZUDO Natural Gas Tankless Water Heater, 199,000 BTU, Indoor | ![]() | Best for High Simultaneous Demand | Fuel and installation: Natural gas; indoor, wall mount | Heating input: 199,000 BTU | Maximum flow rate: 10.3 GPM | VIEW ON AMAZON | See Our Full Breakdown |
| Rinnai RE199iN Non-Condensing Natural Gas Tankless Water Heater | ![]() | Best for High-Demand Households | Fuel type: Natural gas | Installation: Indoor, wall-mounted | Type: Non-condensing | VIEW ON AMAZON | See Our Full Breakdown |
| Konfino Indoor Natural Gas Tankless Water Heater, 85,300 BTU, 3.6 GPM | ![]() | Best for Smaller Hot-Water Loads | Fuel type: Natural gas | Heating capacity: 85,300 BTU | Flow rate: 3.6 GPM | VIEW ON AMAZON | See Our Full Breakdown |
| Westinghouse Indoor Natural Gas Tankless Water Heater, 7.9 GPM, 180,000 BTU | ![]() | Best for Connected Temperature Control | Fuel: Natural gas | Flow rate: 7.9 GPM | Heat output: 180,000 BTU | VIEW ON AMAZON | See Our Full Breakdown |
| LiberLive Indoor Natural Gas Tankless Water Heater, 4.3 GPM, 100,000 BTU | ![]() | Best Midrange Pick for Moderate Demand | Fuel type: Natural gas | Maximum flow rate: 4.3 GPM | Heat output: 100,000 BTU | VIEW ON AMAZON | See Our Full Breakdown |
| gas tankless water heater indoor | Dimensions | Heat output | Weight | Flow rate |
|---|---|---|---|---|
| VEVOR Indoor Natural Gas Tankl | 13.78 in W × 21.65 in H × 6.3 in D | 100,000 BTU/h | 19.8 pounds | 16 liters per minute |
| Natural Gas Tankless Water Hea | 14.37" W x 25.39" H | 68,000 BTU/hr | — | 4.21 GPM (16 L/min) |
| Novieex Indoor Natural Gas Tan | — | 100,000 BTU/h | 19.8 lb | Up to 4.3 GPM |
| APUS Natural Gas Tankless Wate | 20.55 × 13.27 × 5.91 in | — | — | 3.6 GPM |
| FOGATTI Indoor Natural Gas Tan | 23.9 × 15.5 × 7.3 inches | — | — | 5.1 GPM |
| Rheem RTG-70DVLN-3 Indoor Natu | 13.5 W × 24.2 H × 10.27 D inches | 160,000 BTU/hr | 46.5 pounds | — |
| GASLAND Gasmart E Natural Gas | 14.25 W × 24.69 H × 7.28 D inches | 199,000 BTU | 37.5 pounds | — |
| Rheem RTGH-84DVLN-3 Indoor Nat | 17.7 W × 23.7 H × 9.8 D inches | 157,000 BTU/hr | 59.9 pounds | — |
| ThermoMate CZ422NG Indoor Natu | 13.77 W × 21.65 H × 7 D inches | 113,000 BTU | 22 pounds | — |
| MIZUDO Natural Gas Tankless Wa | — | — | — | — |
| Rinnai RE199iN Non-Condensing | 14.05 in W × 27.28 in H | 199,000 BTU | 52.1 lb | — |
| Konfino Indoor Natural Gas Tan | 13.8 in W × 21.7 in H | — | 17.6 lb | 3.6 GPM |
| Westinghouse Indoor Natural Ga | 17.1 in W × 26.2 in H | 180,000 BTU | — | 7.9 GPM |
| LiberLive Indoor Natural Gas T | — | 100,000 BTU | — | — |
More Details on Our Top Picks
VEVOR Indoor Natural Gas Tankless Water Heater, 100,000 BTU
This VEVOR model stands out for its high heat output of 100,000 BTU and a reliable flow rate of 16 liters per minute, making it well-suited for larger households or high-demand applications. Compared to the forimo unit, it offers a slightly higher capacity and a more robust safety feature set, including multiple protections and an intuitive LED display. However, while it provides excellent temperature stability within ±1 °F, its size and installation complexity are similar to other high-capacity models. The wall-mounted design saves space, but it requires proper venting and professional installation. This pick makes the most sense for those needing consistent, high-volume hot water without sacrificing safety or control.
Pros:- Provides hot water on demand with high capacity of 16 liters per minute
- Maintains temperature within ±1 °F for precise comfort
- Includes LED display and safety protections
Cons:- Requires professional installation due to gas and venting needs
- Relatively larger size may limit placement options
Best for: Homeowners with high hot water demand and space for professional setup
Not ideal for: Small apartments or DIY enthusiasts without venting experience
- Brand:VEVOR
- Model:JSQ30-A
- Fuel:Natural gas
- Capacity:4.3 gallons
- Heat output:100,000 BTU/h
- Flow rate:16 liters per minute
- Maximum temperature:149 °F
- Dimensions:13.78 in W × 21.65 in H × 6.3 in D
- Weight:19.8 pounds
Our verdict“This unit suits larger households seeking reliable, high-capacity hot water without sacrificing control or safety.”
Natural Gas Tankless Water Heater Indoor 4.21 GPM 16L Instant Hot Gas Water Heater with Fahrenheit Digital Display Multi-Protection
Compared with larger models like the FOGATTI, this forimo heater delivers a solid 4.21 GPM, supporting multiple fixtures, while emphasizing energy efficiency with 68,000 BTU/hr output. Its advanced combustion technology reduces gas use and noise, appealing to those who prioritize quiet operation and lower utility bills. The digital LED display offers precise temperature control, similar to the Novieex but in a more compact form. Its safety features, including flame failure and anti-freezing protections, enhance reliability. However, installation complexity and venting requirements mean it’s best suited for experienced DIYers or professional installers. This unit makes sense for small to medium homes needing efficient, space-conscious hot water with safety in mind.
Pros:- Supports 2–3 fixtures simultaneously with 4.21 GPM flow
- High efficiency with low noise operation
- Multiple safety protections and digital temperature control
Cons:- Requires proper venting and professional installation
- Installation can be complex due to gas line and venting needs
Best for: Small to medium households with limited space seeking efficient performance
Not ideal for: Cold climates without proper venting or homeowners uncomfortable with installation complexity
- Power Source:Natural Gas
- Flow Rate:4.21 GPM (16 L/min)
- Maximum Temperature:167 °F
- Heat Output:68,000 BTU/hr
- Mount Type:Wall
- Dimensions:14.37″ W x 25.39″ H
- Color:Black
- Features:LED digital display, safety protections
Our verdict“Ideal for space-constrained homes needing efficient, safe hot water with digital precision.”
Novieex Indoor Natural Gas Tankless Water Heater, 4.3 GPM, 100,000 BTU
The Novieex heater offers a similar capacity to the VEVOR but emphasizes user control with an adjustable temperature range of 95°F to 149°F and an LED touchscreen. It is designed for those who want on-demand hot water with precise temperature tuning, along with safety protections like freeze and overheat safeguards. Its professional installation requirement aligns it with the APUS model, but its added features for fine-tuning make it appealing to homeowners who prefer customizable comfort. Still, its reliance on professional setup and suitability below 2,000 feet limit its flexibility for DIY users or high-altitude locations. This makes it a good choice for those prioritizing safety and control but requiring expert installation.
Pros:- Offers up to 4.3 GPM hot water flow
- Adjustable temperature range with ±1°F accuracy
- Includes safety protections like freeze and flame failure safeguards
Cons:- Requires licensed, professional installation
- Best suited for use below 2,000 feet altitude
Best for: Homeowners who desire adjustable temperature control and enhanced safety features
Not ideal for: DIY installers or residents at high altitudes where installation might be challenging
- Fuel:Natural gas
- Flow rate:Up to 4.3 GPM
- Heat output:100,000 BTU/h
- Temperature range:95°F–149°F
- Features:LED touchscreen, safety protections
- Weight:19.8 lb
Our verdict“Best for users seeking precise temperature control and comprehensive safety features with professional setup.”
APUS Natural Gas Tankless Water Heater, 80,000 BTU, 3.6 GPM, Indoor
The APUS heater is tailored for small spaces and lighter hot water demands, supporting up to 3.6 GPM with a modest 80,000 BTU output. Its compact dimensions make it suitable for installations where space is limited, though it requires licensed setup similar to the larger models. Its low-flow activation (0.53 GPM) helps conserve energy and water, making it ideal for single fixtures or low-demand scenarios. Compared with the FOGATTI, it is less powerful but offers reliable safety features like freeze protection and shutoffs. This unit makes sense for small households or supplemental heating in tight spaces, but it’s less suited for high-demand environments or cold climates without proper precautions.
Pros:- Compact wall-mounted design saves space
- Supports low-flow activation for efficiency
- Includes freeze protection and safety shutoffs
Cons:- Requires licensed installation for gas and venting
- Needs draining below 41°F to prevent freeze damage
Best for: Small households or spaces needing low-flow hot water support
Not ideal for: Large families or homes with high simultaneous hot water needs
- Fuel type:Natural gas
- Maximum output:80,000 BTU
- Flow rate:3.6 GPM
- Temperature range:95–149°F
- Dimensions:20.55 × 13.27 × 5.91 in
- Power:120 V AC
- Certifications:CSA
- Warranty:2 years
Our verdict“Ideal for small homes or as a supplementary heater where space and demand are limited.”
FOGATTI Indoor Natural Gas Tankless Water Heater
The FOGATTI heater delivers a robust 120,000 BTU and a high flow rate of 5.1 GPM, supporting multiple outlets simultaneously, which makes it suitable for larger families or high-demand applications. Its stainless steel burner and copper heat exchanger ensure durability and efficient heat transfer, comparable to the Rheem RTG-70DVLN-3. While it offers ample capacity, its larger size and higher energy requirements mean it’s best suited for dedicated setups with proper venting and professional installation. The temperature control within ±1°F and CSA certification provide added safety and reliability. This model is an excellent choice for those needing maximum hot water output but who are prepared for a more complex installation process.
Pros:- Supports 2–4 outlets simultaneously with 5.1 GPM
- Durable stainless steel burner and copper heat exchanger
- CSA-certified with precise temperature control
Cons:- Requires extensive venting and professional installation
- Larger footprint may limit placement options
Best for: Large households or commercial-style setups needing high flow rates
Not ideal for: Small apartments or DIYers with limited space or installation experience
- Fuel:Natural gas
- Heating output:120,000 BTU
- Flow rate:5.1 GPM
- Outlets supported:2–4
- Dimensions:23.9 × 15.5 × 7.3 inches
- Water pressure range:15–150 PSI
- Voltage:120 V AC
- Warranty:2 years for unit, 5 years for heat exchanger
Our verdict“Best suited for large homes or applications demanding high hot water volume with professional setup.”
Rheem RTG-70DVLN-3 Indoor Natural Gas Tankless Water Heater, 7.0 GPM, 160,000 BTU
The Rheem RTG-70DVLN-3 is a balanced choice for households that want tankless hot water without moving up to the larger flow ratings of the RTGH-84DVLN-3 or MIZUDO. Its 7.0 GPM capacity and 160,000 BTU input suit several typical hot-water tasks, though actual flow depends on incoming water temperature and demand. Hot Start Programming is intended to reduce cold bursts between uses, while LeakGuard, freeze protection, and flame-failure protection add safeguards. The tradeoff is its non-condensing design: it needs direct venting and does not offer the 0.93 UEF listed for the condensing RTGH-84DVLN-3. I’d choose this model for a more moderate whole-home load, but look to the higher-capacity Rheem or MIZUDO when simultaneous demand is the priority.
Pros:- Up to 7.0 GPM supports a range of household hot-water needs
- Hot Start Programming is designed to reduce cold bursts between uses
- LeakGuard, freeze protection, and flame-failure protection are included
- Wall-mounted form keeps the unit off the floor
Cons:- Non-condensing design has a lower listed UEF than the Rheem RTGH-84DVLN-3
- Indoor installation requires a direct vent system
- Lower maximum flow than the RTGH-84DVLN-3 and MIZUDO
Best for: Households seeking a wall-mounted indoor heater for everyday multi-fixture use, with added leak and freeze protection.
Not ideal for: Buyers prioritizing condensing efficiency or higher simultaneous flow, and homes where direct-vent installation is impractical.
- Model:RTG-70DVLN-3
- Fuel and installation:Natural gas; indoor
- Maximum flow rate:7.0 GPM
- Heat output:160,000 BTU/hr
- Uniform Energy Factor:0.82
- Maximum temperature:140°F
- Dimensions:13.5 W × 24.2 H × 10.27 D inches
- Weight:46.5 pounds
- Certification:CSA certified
Our verdict“Choose this Rheem for protected, mid-to-high-capacity everyday use if you can accommodate direct venting and do not need the lineup’s highest flow.”
GASLAND Gasmart E Natural Gas Tankless Water Heater, 199,000 BTU, 7.6 GPM
The GASLAND Gasmart E pairs a high 199,000 BTU input with a 7.6 GPM maximum flow, making it a step up in rated capacity from the Rheem RTG-70DVLN-3. Its 37.5-pound weight and 7.28-inch depth may appeal where wall space matters, although it is wider than that Rheem. Safety provisions include freeze, dry-combustion, flame-failure, and high-water-pressure protection, plus an error-code indicator. Its 0.8 UEF is lower than the condensing Rheem RTGH-84DVLN-3’s listed 0.93, so shoppers focused on efficiency may prefer that alternative. The 7.6 GPM figure is a maximum, not a promise of that flow in every climate or during several simultaneous draws. I’d shortlist this model for buyers who want substantial input and broad safety coverage, but not those needing the lineup’s highest stated flow.
Pros:- 199,000 BTU heat input and up to 7.6 GPM maximum flow
- Relatively light at 37.5 pounds for wall mounting
- Includes freeze, dry-combustion, flame-failure, and high-pressure protections
- Error-code indicator can help identify operating faults
Cons:- Listed 0.8 UEF is below the condensing Rheem RTGH-84DVLN-3
- Maximum flow is below the MIZUDO’s stated 10.3 GPM
- Requires natural gas and an appropriate indoor installation
Best for: Homeowners with natural-gas service who want a relatively lightweight indoor unit with higher rated capacity than a 7.0 GPM model.
Not ideal for: Buyers seeking a condensing heater, the highest listed flow rate, or an installation that cannot support an indoor gas unit.
- Model:CE686NG
- Fuel and installation:Natural gas; indoor
- Heat output:199,000 BTU
- Maximum flow rate:7.6 GPM
- Uniform Energy Factor:0.8
- Maximum temperature:140°F
- Dimensions:14.25 W × 24.69 H × 7.28 D inches
- Weight:37.5 pounds
- Certification:CSA
Our verdict“Pick the GASLAND if you want high heat input and multiple safety protections in a relatively light unit, rather than the highest efficiency or maximum flow.”
Rheem RTGH-84DVLN-3 Indoor Natural Gas Tankless Water Heater, 8.4 GPM
The Rheem RTGH-84DVLN-3 stands apart from the RTG-70DVLN-3 by combining a higher stated 8.4 GPM flow with condensing operation and a listed 0.93 UEF. That makes it the stronger fit for homes with heavier simultaneous hot-water demand and buyers comparing efficiency figures. Its 157,000 BTU input is lower than the GASLAND’s 199,000 BTU, yet the listed flow is higher; those ratings are not directly interchangeable because operating conditions affect delivered flow. Hot Start Programming and digital temperature control add useful day-to-day control, while overheat and freeze protections address common operating risks. The tradeoffs are a heavier 59.9-pound unit and the need for indoor direct venting, with professional installation recommended. Compared with the compact ThermoMate CZ422NG, this is a whole-home choice, not a small-demand option.
Pros:- Up to 8.4 GPM at a 35°F rise
- Listed 0.93 UEF and condensing design
- Hot Start Programming and digital temperature control
- Freeze and overheat protection
Cons:- At 59.9 pounds, it is heavier than the Rheem RTG-70DVLN-3 and GASLAND
- Requires indoor direct venting and professional installation is recommended
- Higher capacity may be unnecessary for homes with modest hot-water demand
Best for: Households with several regular hot-water draws that want a higher-flow condensing Rheem and can arrange professional indoor venting.
Not ideal for: Small households with modest hot-water use, buyers seeking a lightweight installation, or homes without suitable direct-vent arrangements.
- Model:RTGH-84DVLN-3
- Fuel and installation:Natural gas; indoor, direct vent
- Maximum flow rate:8.4 GPM at 35°F rise
- Heat output:157,000 BTU/hr
- Uniform Energy Factor:0.93
- Maximum temperature:140°F
- Dimensions:17.7 W × 23.7 H × 9.8 D inches
- Weight:59.9 pounds
- Warranty:1 year labor; 15 years heat exchanger; 5 years parts
Our verdict“Choose this model over the RTG-70DVLN-3 when higher rated flow and condensing efficiency matter enough to justify a larger, heavier installation.”
ThermoMate CZ422NG Indoor Natural Gas Tankless Water Heater, 5 GPM
The ThermoMate CZ422NG takes a smaller-capacity approach than the Rheem RTG-70DVLN-3 and GASLAND: its maximum flow is 5 GPM, with 113,000 BTU output. That can suit a smaller household or a home where hot-water draws are usually staggered, but it leaves less headroom for several fixtures running together. The 22-pound wall-mounted body is the lightest among these five products, and its 3.5-inch LED display, adjustable 90–140°F range, and freeze protection give owners useful controls and monitoring. The advertised thermal efficiency of up to 98% should be read alongside its listed 0.81 UEF, rather than treated as the same measurement. Like the larger models, it still needs indoor venting, natural gas, and a 120V connection; installation may call for professional setup.
Pros:- Compact 22-pound wall-mounted design
- LED diagnostic display and adjustable 90–140°F temperature range
- Freeze protection activates at 41°F
- Includes 3/4-inch water connections and a 120V power cord
Cons:- 5 GPM maximum flow is below the Rheem RTG-70DVLN-3 and GASLAND
- Indoor venting, natural gas, and 120V power are required
- The stated up-to-98% thermal efficiency differs from its listed 0.81 UEF
Best for: Smaller households or secondary indoor installations with moderate hot-water demand and limited wall space.
Not ideal for: Families expecting frequent simultaneous showers and appliance use, or buyers who need a higher maximum flow than 5 GPM.
- Fuel and installation:Natural gas; indoor
- Maximum flow rate:5 GPM
- Heat output:113,000 BTU
- Temperature range:90–140°F
- Uniform Energy Factor:0.81
- Voltage:120V AC
- Dimensions:13.77 W × 21.65 H × 7 D inches
- Weight:22 pounds
- Display:3.5-inch LED
Our verdict“Choose the ThermoMate for a compact, lower-demand setup with a diagnostic display, but skip it if several fixtures often need hot water at once.”
MIZUDO Natural Gas Tankless Water Heater, 199,000 BTU, Indoor
With a stated 10.3 GPM maximum flow, the MIZUDO has the highest flow rating in this group, making it the clearest fit for households that regularly draw hot water at multiple fixtures. It also offers Wi-Fi app control, ±1°F temperature control accuracy, and activation at flows as low as 0.53 GPM—useful details for monitoring operation and handling smaller draws. Its 199,000 BTU input matches the GASLAND Gasmart E, but the MIZUDO lists substantially higher maximum flow; buyers should still confirm expected performance against their incoming-water conditions and household demand. The sealed direct-vent system draws outdoor combustion air, and the included concentric vent-kit specification may help planning, though professional installation is recommended. It is not recommended above 3,000 feet, and its size and 55.5-pound weight make it less suited to tight or elevation-challenged installations.
Pros:- Highest stated maximum flow in this group at 10.3 GPM
- Wi-Fi app control provides operating status and alerts
- ±1°F temperature control accuracy and 0.53 GPM low-flow activation
- Sealed direct vent draws outdoor combustion air
Cons:- Not recommended for elevations above 3,000 feet
- Professional installation is recommended
- Larger and heavier than the ThermoMate CZ422NG
Best for: Larger households with frequent overlapping hot-water use that want app monitoring and precise temperature adjustment.
Not ideal for: Homes above 3,000 feet, buyers with modest demand, or anyone unable to accommodate professional direct-vent installation.
- Fuel and installation:Natural gas; indoor, wall mount
- Heating input:199,000 BTU
- Maximum flow rate:10.3 GPM
- Temperature range:Up to 149°F
- Temperature control accuracy:±1°F
- Low-flow activation:0.53 GPM
- Power:44 watts; 120 volts
- Dimensions and weight:15.9 × 24.8 × 10.4 inches; 55.5 pounds
- Warranty:2 years full unit; 5 years heat exchanger
Our verdict“Pick the MIZUDO for the group’s highest stated flow and app control if your home is below 3,000 feet and supports professional direct-vent installation.”
Rinnai RE199iN Non-Condensing Natural Gas Tankless Water Heater
The Rinnai RE199iN is the strongest fit here for households that regularly draw hot water from several fixtures at once. Its stated capacity of up to 9.8 GPM and 199,000 BTU output give it more flow headroom than the Westinghouse 7.9 GPM model, though actual delivery depends on incoming water temperature and installation conditions. The wall-mounted design frees floor space, while the LED diagnostics and service reminders make basic status checks easier. This is a non-condensing unit, so indoor venting needs careful planning; professional installation is recommended. Wi-Fi monitoring also requires a separately sold Controlr. Its warranty coverage is stronger on the heat exchanger than the Westinghouse’s listed five years, but buyers should note the shorter labor coverage without timely registration.
Pros:- Up to 9.8 GPM and 199,000 BTU suit multiple simultaneous household draws.
- Wall-mounted form saves floor space.
- LED display shows diagnostic codes and service reminders.
- Heat exchanger warranty runs 15 years.
Cons:- Professional installation and suitable indoor venting are recommended.
- Wi-Fi monitoring requires a separately sold Controlr module.
- Labor coverage is one year unless registration within 90 days extends it to five years.
Best for: Larger households that want high simultaneous hot-water capacity and are prepared for professional indoor venting and installation.
Not ideal for: Buyers seeking built-in Wi-Fi monitoring, a simple DIY installation, or a unit that avoids indoor venting requirements.
- Fuel type:Natural gas
- Installation:Indoor, wall-mounted
- Type:Non-condensing
- Maximum flow rate:Up to 9.8 GPM
- Heat output:199,000 BTU
- Maximum temperature:140 °F
- Dimensions:14.05 in W × 27.28 in H
- Weight:52.1 lb
- Warranty:Heat exchanger: 15 years; parts: 5 years; labor: 1 year, or 5 years with registration within 90 days
Our verdict“Choose the Rinnai RE199iN if your priority is high household flow capacity and you can accommodate professional installation and venting.”
Konfino Indoor Natural Gas Tankless Water Heater, 85,300 BTU, 3.6 GPM
The Konfino makes more sense for a smaller home or limited set of outlets than the higher-capacity Rinnai RE199iN or Westinghouse. Its 3.6 GPM rating is described for two to three water points, so it is a compact-load choice rather than a strong match for several high-demand fixtures running together. At 17.6 pounds, it is much lighter than the 52.1-pound Rinnai, and its included vent pipe may simplify sourcing compatible components, though it does not replace the need for proper professional installation. The LED display, adjustable temperature range, and freeze protection to 23°F add useful everyday controls. A key limitation is its stated 2,000-foot elevation ceiling; buyers in higher locations should skip it, and households planning for substantial simultaneous demand should step up to a larger model.
Pros:- 3.6 GPM capacity is suited to a modest two-to-three-point load.
- Lightweight wall-mounted body weighs 17.6 lb.
- Adjustable temperature and LED display provide straightforward controls.
- Vent pipe is included, with freeze protection rated to 23°F.
Cons:- Lower capacity than the Rinnai RE199iN and Westinghouse models limits simultaneous demand.
- Not recommended above 2,000 feet elevation.
- Professional installation is recommended.
Best for: Owners of smaller homes or apartments with modest hot-water demand across two or three water points, below 2,000 feet elevation.
Not ideal for: Large households with frequent simultaneous showers and appliance use, or buyers installing above 2,000 feet.
- Fuel type:Natural gas
- Heating capacity:85,300 BTU
- Flow rate:3.6 GPM
- Temperature range:95°F–149°F
- Mount type:Wall-mounted
- Dimensions:13.8 in W × 21.7 in H
- Weight:17.6 lb
- Heat exchanger:Oxygen-free copper
- Elevation limit:Not recommended above 2,000 ft
Our verdict“Pick the Konfino for a smaller, lower-demand home where its limited flow capacity and elevation restriction fit the installation.”
Westinghouse Indoor Natural Gas Tankless Water Heater, 7.9 GPM, 180,000 BTU
The Westinghouse stands apart from the Rinnai RE199iN by pairing substantial household capacity with Wi-Fi app and voice controls and a stated ±1°F temperature stability. That combination is useful for buyers who want remote monitoring and steadier outlet temperature, while its 7.9 GPM rating remains below the Rinnai’s stated 9.8 GPM ceiling. It also activates at 0.53 GPM and is listed to operate at 15 PSI, details that can matter in homes with low-flow fixtures or modest water pressure. The tradeoff is installation compatibility: it needs 3/4-inch NPT plumbing and 120V AC power. Its warranty is also shorter on the heat exchanger than the Rinnai’s 15-year coverage. Choose this model for connected controls, not for the roundup’s highest stated flow.
Pros:- Wi-Fi app and voice controls provide remote monitoring and fault alerts.
- Temperature stability is specified at ±1°F.
- 7.9 GPM capacity supports multiple household fixtures.
- Low activation flow of 0.53 GPM and minimum operating pressure of 15 PSI.
Cons:- Requires 3/4-inch NPT plumbing and 120V AC power.
- Flow rating is lower than the Rinnai RE199iN’s stated 9.8 GPM.
- Warranty covers the heat exchanger for five years and the complete unit for two years.
Best for: Households wanting remote app or voice controls, steady temperature, and substantial—but not maximum—simultaneous hot-water capacity.
Not ideal for: Buyers without 3/4-inch NPT plumbing or 120V power, or those prioritizing the highest stated flow and longest heat-exchanger warranty.
- Fuel:Natural gas
- Flow rate:7.9 GPM
- Heat output:180,000 BTU
- Temperature range:95°F–149°F
- Temperature stability:±1°F
- Minimum activation flow:0.53 GPM
- Power:120V AC
- Dimensions:17.1 in W × 26.2 in H
- Warranty:Complete unit: 2 years; heat exchanger: 5 years
Our verdict“Choose the Westinghouse if connected monitoring and close temperature control matter more than matching the Rinnai’s higher flow ceiling.”
LiberLive Indoor Natural Gas Tankless Water Heater, 4.3 GPM, 100,000 BTU
With 4.3 GPM and 100,000 BTU, the LiberLive sits between the Konfino’s 3.6 GPM and the Westinghouse’s 7.9 GPM. That makes it a plausible middle ground for moderate household demand, though its rating still falls short of what larger homes may need when multiple high-flow fixtures run together. Its copper heat exchanger, LED controls, adjustable 95°F–149°F range, and freeze protection to 23°F offer practical features without the connected controls found on the Westinghouse. Installation needs attention: a licensed plumber is required, and the listed connection and vent sizes should be checked against the intended setup. The product data also advises against use above 2,000 feet. Its two-year warranty is relatively limited beside the Rinnai’s longer heat-exchanger coverage.
Pros:- 4.3 GPM rating provides more stated flow than the Konfino’s 3.6 GPM.
- Adjustable temperature range and LED controls support direct temperature setting.
- Copper heat exchanger and anti-freeze protection rated to 23°F.
- Compact wall-mounted form measures 6.7 inches deep.
Cons:- Licensed-plumber installation is required.
- Not recommended above 2,000 feet elevation.
- Two-year warranty is shorter than the Rinnai RE199iN’s listed heat-exchanger coverage.
Best for: Smaller households with moderate hot-water demand that want more stated flow than the Konfino and have a suitable below-2,000-foot installation site.
Not ideal for: Large households needing the Rinnai RE199iN’s higher flow, buyers seeking Wi-Fi controls, or installations above 2,000 feet.
- Fuel type:Natural gas
- Maximum flow rate:4.3 GPM
- Heat output:100,000 BTU
- Temperature range:95°F–149°F
- Heat exchanger:Oxygen-free copper
- Connector size:1/2-inch NPT
- Vent size:3-inch OD
- Power:120V AC
- Warranty:2 years
Our verdict“Choose the LiberLive for moderate demand when its 4.3 GPM capacity fits your household and licensed installation is available.”

How We Picked
I compared the 14 listed indoor natural gas models through the questions that shape a real purchase: how much hot water a household may need at once, how clearly capacity is specified, and whether the product information gives buyers enough to verify compatibility. Published GPM and BTU figures helped distinguish lower-demand units from higher-output options, but neither figure alone guarantees performance in every climate or installation. I also weighed brand familiarity, the clarity of the model identity, and the practical importance of venting and gas-supply requirements.
The ranking favors models that appear better suited to a wider range of household demand while still making their tradeoffs visible. Higher-capacity models rank ahead for whole-home use, but they are not automatically the right choice: installation requirements and utility capacity can make a smaller unit a better fit. Where product details are limited or model specifications are less clear, I treat that uncertainty as a drawback rather than assuming features that are not stated. Buyers should confirm current manufacturer documentation and local installation requirements before choosing.
Factors to Consider When Choosing Gas Tankless Water Heater Indoor
Choosing among indoor gas tankless heaters starts with the home, not the headline GPM number. I’d check household demand, incoming water temperature, gas and venting compatibility, and the level of product support available before narrowing the shortlist. These checks can reveal when a smaller unit is sufficient—or when a high-capacity model would require costly changes.
Match Flow Capacity to Simultaneous Use
Estimate which fixtures are likely to run together rather than adding up every faucet in the house. A household that usually runs one shower at a time may not need the capacity of a unit intended for heavier simultaneous demand. In a colder region, incoming water starts at a lower temperature, so the heater must raise it further and may deliver less flow at the desired temperature. Treat listed GPM as a comparison point, not a promise that the unit will supply that flow under every condition. A common mistake is choosing by bedroom count alone without considering showerheads, tubs, or overlapping routines. When demand varies, ask a qualified installer to size the unit using local winter water temperature and actual fixture flow rates.
Check BTU Input Against Your Gas Supply
A high BTU rating can support greater heating output, but the home must be able to deliver the required gas volume. Older or undersized gas piping may need changes before a large unit can operate as intended, adding work beyond the heater purchase. Have an installer review the meter, pipe sizing, pressure, and other gas appliances that may run at the same time. Do not assume a unit is compatible just because the fuel type matches. Smaller models can reduce gas-demand pressure, though they may provide less flow during peak use. Compare the installation quote alongside the heater specifications so a seemingly suitable model does not become a poor fit after site inspection.
Plan Indoor Venting and Combustion Air
An indoor gas heater needs a venting arrangement that matches its exact model and local code. Vent material, route length, termination location, and clearances can constrain where the unit can go, particularly in a tight utility room or retrofit. Some designs may also have requirements for combustion air or condensate drainage, so verify the manufacturer’s installation manual rather than inferring details from the product title. A direct replacement may still need new vent components if the old appliance used a different system. Before ordering, ask an installer to inspect the proposed location and identify any wall, roof, or drainage work. This step can rule out a model that looks attractive on paper but does not fit the available space or vent path.
Compare Non-Condensing and Condensing Designs Carefully
Efficiency labels do not tell the whole installation story. Condensing designs can recover more heat from exhaust, but often call for suitable condensate management and compatible vent materials; non-condensing units may have different venting needs and can release hotter exhaust. The Rinnai RE199iN is explicitly identified as non-condensing, while the product names for several other options do not make the design clear. Confirm the category and required accessories in the manufacturer documentation before comparing operating costs. A retrofit with an existing compatible vent may favor one design, while a new installation may give the installer more flexibility. Ask for the expected installation scope and maintenance needs, not just an efficiency figure.
Verify Product Support, Warranty, and Service Access
A tankless heater is a long-term appliance, so access to service information and replacement parts matters alongside initial specifications. Check the written warranty, required maintenance schedule, authorized service options, and availability of common components before committing. Brand familiarity can make documentation and service easier to locate, but it does not replace checking the exact model’s terms. For less familiar listings in this roundup, seek a complete manual and clear support contact details before purchase. Also leave enough clearance around the unit for inspection and servicing; a cramped installation can make routine work harder. A strong fit on paper is less reassuring if parts or qualified technicians are difficult to find locally.
Budget for the Installed System, Not Just the Heater
The heater is only one part of an indoor gas installation. Vent changes, gas-line upgrades, electrical connections, permits, condensate work, and removal of the old appliance can affect the project scope. Request a site-specific quote that lists those items before comparing options, and ask whether the installer has included required venting parts and startup checks. A higher-capacity unit may reduce hot-water bottlenecks but can call for more substantial gas and vent work. A smaller heater may be easier to fit yet disappoint if the household regularly exceeds its flow capacity. The best value is the system that meets peak demand without paying for capacity or installation work the home does not need.
Frequently Asked Questions
How can I tell whether a 3.6–4.3 GPM model will serve my household?
Start by measuring the flow of the fixtures you expect to use at the same time, especially showers and tubs. Then account for the temperature rise needed between incoming cold water and your chosen hot-water setting; colder winter water can reduce the flow a heater can sustain. A 3.6–4.3 GPM listing may suit a household with staggered use, but it can feel limiting when multiple showers or appliances overlap. Ask an installer to compare your measured demand with the manufacturer’s performance chart for your climate. Do not use the GPM figure alone as a household-size guarantee.
Can I replace an indoor tank heater with one of these without changing the vent?
Not necessarily. Tankless models can require different vent materials, pipe sizing, termination clearances, and routing than a storage tank heater. Even a replacement tankless unit may not use the same vent system as the existing one, particularly if the design or model requirements differ. Have an installer identify the precise venting specifications for the model you are considering and inspect the current setup. Include any vent replacement in the project quote before buying the heater.
Should I choose the highest GPM model in the roundup?
Only if your household’s peak simultaneous demand calls for it and the home can support its installation requirements. Higher listed flow can help with overlapping hot-water use, but it does not guarantee the same output in every climate or at every temperature setting. Larger-input models may also require more gas capacity and a suitable vent path. If your household usually uses one hot-water fixture at a time, a more modest model may be a better match. Compare actual demand and site conditions before paying for capacity you may rarely use.
What should I verify before buying a less familiar model from this list?
Find the manufacturer’s manual, exact model number, warranty terms, and a clear parts or service contact. Check that its listed capacity and fuel type match the product documentation, then confirm venting, gas pressure, electrical, and maintenance requirements. Ask a local installer whether they can service the unit and source replacement parts. If those details are difficult to verify, that uncertainty should count against the purchase even if the headline BTU or GPM figure looks attractive. Keep documentation available for permitting, installation, and future service.
When is a non-condensing model a sensible choice for an indoor installation?
A non-condensing design may fit a project where its venting requirements suit the site and the installer can use a compatible setup. The Rinnai RE199iN is identified as non-condensing in this roundup, but buyers should check its manual and compare the complete installation requirements with other designs. Condensing models may call for condensate handling and compatible vent materials, while non-condensing models have their own exhaust and clearance rules. Neither type is automatically simpler or less costly in every home. Ask for an installation comparison based on your existing vent, available drainage, and local code.
Conclusion
For the broadest capacity range among these picks, I’d choose the Rheem RTGH-84DVLN-3 as best overall, provided the home can support its gas and venting needs. The VEVOR 100,000 BTU is my value-oriented choice for buyers whose demand is modest and who have confirmed its documentation and local service options. For a premium-leaning option with a clearly identified non-condensing design, consider the Rinnai RE199iN; buyers seeking a familiar brand and a specific higher-capacity step can also compare the Rheem RTG-70DVLN-3. Beginners should start with a qualified installer’s site assessment and favor a model with clear manuals, warranty terms, and accessible support rather than choosing by GPM alone. For heavier simultaneous use, compare the Rheem RTGH-84DVLN-3, GASLAND Gasmart E, and Westinghouse by their installation requirements and confirmed performance charts. The right pick is the one that matches your winter water temperature, peak fixture demand, and installation site—not simply the largest number on the listing.



![[Genuine] Waterdrop PF-01A Water Filter Replacement for W...](https://m.media-amazon.com/images/I/41+5tl9EiKL._SX342_SY445_QL70_FMwebp_.jpg)













